Message-Id: <c91308e26397dbe49f384c7d3cf168593e1fe8b0.1285933332.git.viresh.kumar@st.com>
Date:	Fri,  1 Oct 2010 17:26:05 +0530
From:	Viresh KUMAR <viresh.kumar@...com>
To:	linux-arm-kernel@...ts.infradead.org, rtc-linux@...glegroups.com,
	a.zummo@...ertech.it, dbrownell@...rs.sourceforge.net,
	linux-usb@...r.kernel.org, linux-input@...r.kernel.org,
	dmitry.torokhov@...il.com, linux-mtd@...ts.infradead.org,
	dwmw2@...radead.org, linux-kernel@...r.kernel.org,
	akpm@...ux-foundation.org
Cc:	Pratyush Anand <pratyush.anand@...com>, shiraz.hashim@...com,
	vipin.kumar@...com, deepak.sikri@...com, armando.visconti@...com,
	vipulkumar.samar@...com, rajeev-dlh.kumar@...com,
	bhupesh.sharma@...com, Viresh Kumar <viresh.kumar@...com>
Subject: [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport

From: Pratyush Anand <pratyush.anand@...com>

This is a configurable gadget. can be configured by sysfs interface. Any
IP available at PCIE bus can be programmed to be used by host
controller.It supoorts both INTX and MSI.
By default, gadget is configured for INTX and SYSRAM1 is mapped to BAR0
with size 0x1000

Signed-off-by: Pratyush Anand <pratyush.anand@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...com>
---
 drivers/misc/Kconfig                 |   10 +
 drivers/misc/Makefile                |    1 +
 drivers/misc/spear13xx_pcie_gadget.c |  888 ++++++++++++++++++++++++++++++++++
 3 files changed, 899 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/spear13xx_pcie_gadget.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b743312..e19deda 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -344,6 +344,16 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
+config SPEAR13XX_PCIE_GADGET
+	bool "PCIE gadget support for SPEAr13XX platform"
+	depends on ARCH_SPEAR13XX
+	default n
+	help
+	 This option enables gadget support for PCIE controller. If
+	 board file defines any controller as PCIE endpoint then a sysfs
+	 entry will be created for that controller. User can use these
+	 sysfs node to configure PCIE EP as per his requirements.
+
 config TI_DAC7512
 	tristate "Texas Instruments DAC7512"
 	depends on SPI && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 42eab95..9408f23 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -33,5 +33,6 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/
 obj-y				+= cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET)	+= spear13xx_pcie_gadget.o
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 0000000..dc63a28
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,888 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<pratyush.anand@...com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/pci_regs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE	(200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE	(0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE	(20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE	(12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE	(12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE	(12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK	(SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT	0
+#define INT_TYPE_INTX	1
+#define INT_TYPE_MSI	2
+struct spear_pcie_gadget_config {
+	void __iomem *base;
+	void __iomem *va_app_base;
+	void __iomem *va_dbi_base;
+	char int_type[10];
+	u32 requested_msi;
+	u32 configured_msi;
+	u32 bar0_size;
+	u32 bar0_rw_offset;
+	u32 va_bar0_address;
+};
+
+static void enable_dbi_access(struct pcie_app_reg *app_reg)
+{
+	/* Enable DBI access */
+	writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg *app_reg)
+{
+	/* disable DBI access */
+	writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+		int where, int size, u32 *val)
+{
+	struct pcie_app_reg *app_reg
+		= (struct pcie_app_reg *) config->va_app_base;
+	u32 va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (u32)config->va_dbi_base + (where & ~0x3);
+
+	*val = readl(va_address);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+		int where, int size, u32 val)
+{
+	struct pcie_app_reg *app_reg
+		= (struct pcie_app_reg *) config->va_app_base;
+	u32 va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (u32)config->va_dbi_base + (where & ~0x3);
+
+	if (size == 4)
+		writel(val, va_address);
+	else if (size == 2)
+		writew(val, va_address + (where & 2));
+	else if (size == 1)
+		writeb(val, va_address + (where & 3));
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL	48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+		u32 pos, int cap, int *ttl)
+{
+	u32 id;
+
+	while ((*ttl)--) {
+		spear_dbi_read_reg(config, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+	return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+			u32 pos, int cap)
+{
+	int ttl = PCI_FIND_CAP_TTL;
+
+	return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+				u8 hdr_type)
+{
+	u32 status;
+
+	spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	switch (hdr_type) {
+	case PCI_HEADER_TYPE_NORMAL:
+	case PCI_HEADER_TYPE_BRIDGE:
+		return PCI_CAPABILITY_LIST;
+	case PCI_HEADER_TYPE_CARDBUS:
+		return PCI_CB_CAPABILITY_LIST;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+/**
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM	Power Management
+ * %PCI_CAP_ID_AGP	Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD	Vital Product Data
+ * %PCI_CAP_ID_SLOTID	Slot Identification
+ * %PCI_CAP_ID_MSI	Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP	CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX	PCI-X
+ * %PCI_CAP_ID_EXP	PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+		int cap)
+{
+	u32 pos;
+	u32 hdr_type;
+
+	spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+	pos = pci_find_own_cap_start(config, hdr_type);
+	if (pos)
+		pos = pci_find_own_next_cap(config, pos, cap);
+
+	return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+	return 0;
+}
+
+static ssize_t pcie_gadget_show_link(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+
+	if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+		return sprintf(buf, "UP");
+	else
+		return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+	char link[10];
+
+	if (sscanf(buf, "%s", link) != 1)
+		return -EINVAL;
+
+	if (!strcmp(link, "UP"))
+		writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+			&app_reg->app_ctrl_0);
+	else
+		writel(readl(&app_reg->app_ctrl_0)
+				& ~(1 << APP_LTSSM_ENABLE_ID),
+				&app_reg->app_ctrl_0);
+	return count;
+}
+
+static DEVICE_ATTR(link, S_IWUSR | S_IRUGO, pcie_gadget_show_link,
+		pcie_gadget_store_link);
+
+static ssize_t pcie_gadget_show_int_type(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	char int_type[10];
+	u32 cap, vector, vec, flags;
+
+	if (sscanf(buf, "%s", int_type) != 1)
+		return -EINVAL;
+
+	if (!strcmp(int_type, "INTA"))
+		spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+	else if (!strcmp(int_type, "MSI")) {
+		vector = config->requested_msi;
+		vec = 0;
+		while (vector > 1) {
+			vector /= 2;
+			vec++;
+		}
+		spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+		cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+		spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+		flags &= ~PCI_MSI_FLAGS_QMASK;
+		flags |= vec << 1;
+		spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+	}
+
+	strcpy(config->int_type, int_type);
+
+	return count;
+}
+
+static DEVICE_ATTR(int_type, S_IWUSR | S_IRUGO, pcie_gadget_show_int_type,
+		pcie_gadget_store_int_type);
+
+static ssize_t pcie_gadget_show_no_of_msi(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+	u32 cap, vector, vec, flags;
+
+	if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+			!= (1 << CFG_MSI_EN_ID))
+		vector = 0;
+	else {
+		cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+		spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+		flags &= ~PCI_MSI_FLAGS_QSIZE;
+		vec = flags >> 4;
+		vector = 1;
+		while (vec--)
+			vector *= 2;
+	}
+	config->configured_msi = vector;
+
+	return sprintf(buf, "%u", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+	if (sscanf(buf, "%u", &config->requested_msi) != 1)
+		return -EINVAL;
+	if (config->requested_msi > 32)
+		config->requested_msi = 32;
+
+	return count;
+}
+
+static DEVICE_ATTR(no_of_msi, S_IWUSR | S_IRUGO, pcie_gadget_show_no_of_msi,
+		pcie_gadget_store_no_of_msi);
+
+static ssize_t pcie_gadget_store_inta(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+	int en;
+
+	if (sscanf(buf, "%d", &en) != 1)
+		return -EINVAL;
+
+	if (en)
+		writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+				&app_reg->app_ctrl_0);
+	else
+		writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+				&app_reg->app_ctrl_0);
+
+	return count;
+}
+
+static DEVICE_ATTR(inta, S_IWUSR, NULL, pcie_gadget_store_inta);
+
+static ssize_t pcie_gadget_store_send_msi(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+	int vector;
+	u32 ven_msi;
+
+	if (sscanf(buf, "%d", &vector) != 1)
+		return -EINVAL;
+
+	if (!config->configured_msi)
+		return -EINVAL;
+
+	if (vector >= config->configured_msi)
+		return -EINVAL;
+
+	ven_msi = readl(&app_reg->ven_msi_1);
+	ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+	ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+	ven_msi &= ~VEN_MSI_TC_MASK;
+	ven_msi |= 0 << VEN_MSI_TC_ID;
+	ven_msi &= ~VEN_MSI_VECTOR_MASK;
+	ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+	/*generating interrupt for msi vector*/
+	ven_msi |= VEN_MSI_REQ_EN;
+	writel(ven_msi, &app_reg->ven_msi_1);
+	/*need to wait till this bit is cleared, it is not cleared
+	 * autometically[Bug RTL] TBD*/
+	udelay(1);
+	ven_msi &= ~VEN_MSI_REQ_EN;
+	writel(ven_msi, &app_reg->ven_msi_1);
+
+	return count;
+}
+
+static DEVICE_ATTR(send_msi, S_IWUSR, NULL, pcie_gadget_store_send_msi);
+
+static ssize_t pcie_gadget_show_vendor_id(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 id;
+
+	spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+	return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 id;
+
+	if (sscanf(buf, "%x", &id) != 1)
+		return -EINVAL;
+
+	spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+	return count;
+}
+
+static DEVICE_ATTR(vendor_id, S_IWUSR | S_IRUGO, pcie_gadget_show_vendor_id,
+		pcie_gadget_store_vendor_id);
+
+static ssize_t pcie_gadget_show_device_id(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 id;
+
+	spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+	return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 id;
+
+	if (sscanf(buf, "%x", &id) != 1)
+		return -EINVAL;
+
+	spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+	return count;
+}
+
+static DEVICE_ATTR(device_id, S_IWUSR | S_IRUGO, pcie_gadget_show_device_id,
+		pcie_gadget_store_device_id);
+
+static ssize_t pcie_gadget_show_bar0_size(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%x", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 size, pos, pos1;
+	u32 no_of_bit = 0;
+
+	if (sscanf(buf, "%x", &size) != 1)
+		return -EINVAL;
+	/* as per PCIE specs, min bar size supported is 128 bytes. But
+	 * our controller supports min as 256*/
+	if (size <= 0x100)
+		size = 0x100;
+	/* max bar size is 1MB*/
+	else if (size >= 0x100000)
+		size = 0x100000;
+	else {
+		pos = 0;
+		pos1 = 0;
+		while (pos < 21) {
+			pos = find_next_bit((unsigned long *)&size, 21, pos);
+			if (pos != 21)
+				pos1 = pos + 1;
+			pos++;
+			no_of_bit++;
+		}
+		if (no_of_bit == 2)
+			pos1--;
+
+		size = 1 << pos1;
+	}
+	config->bar0_size = size;
+	spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+	return count;
+}
+
+static DEVICE_ATTR(bar0_size, S_IWUSR | S_IRUGO, pcie_gadget_show_bar0_size,
+		pcie_gadget_store_bar0_size);
+
+static ssize_t pcie_gadget_show_bar0_address(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+
+	u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+	return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+	u32 address;
+
+	if (sscanf(buf, "%x", &address) != 1)
+		return -EINVAL;
+
+	address &= ~(config->bar0_size - 1);
+	if (config->va_bar0_address)
+		iounmap((void *)config->va_bar0_address);
+	config->va_bar0_address = (u32)ioremap(address, config->bar0_size);
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	writel(address, &app_reg->pim0_mem_addr_start);
+
+	return count;
+}
+
+static DEVICE_ATTR(bar0_address, S_IWUSR | S_IRUGO,
+		pcie_gadget_show_bar0_address, pcie_gadget_store_bar0_address);
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%x", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 offset;
+
+	if (sscanf(buf, "%x", &offset) != 1)
+		return -EINVAL;
+
+	if (offset % 4)
+		return -EINVAL;
+
+	config->bar0_rw_offset = offset;
+
+	return count;
+}
+
+static DEVICE_ATTR(bar0_rw_offset, S_IWUSR | S_IRUGO,
+	pcie_gadget_show_bar0_rw_offset, pcie_gadget_store_bar0_rw_offset);
+
+static ssize_t pcie_gadget_show_bar0_data(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 data;
+
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	data = readl(config->va_bar0_address + config->bar0_rw_offset);
+
+	return sprintf(buf, "%x", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+	u32 data;
+
+	if (sscanf(buf, "%x", &data) != 1)
+		return -EINVAL;
+
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	writel(data, config->va_bar0_address + config->bar0_rw_offset);
+
+	return count;
+}
+
+static DEVICE_ATTR(bar0_data, S_IWUSR | S_IRUGO,
+		pcie_gadget_show_bar0_data, pcie_gadget_store_bar0_data);
+
+static ssize_t pcie_gadget_show_help(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	char text[] = "\t\tlink read->ltssm status\n \
+		link write->arg1 = UP to enable ltsmm DOWN to disable\n \
+		int_type read->type of supported interrupt\n \
+		int_type write->arg1 = interrupt type to be configured and\n \
+		can be INTA, MSI or NO_INT\n \
+		(select MSI only when you have programmed no_of_msi)\n \
+		no_of_msi read->zero if MSI is not enabled by host\n \
+		and positive value is the number of MSI vector granted\n \
+		no_of_msi write->arg1 = number of MSI vector needed\n \
+		inta write->arg1 = 1 to assert INTA and 0 to de-assert\n \
+		send_msi write->arg1 = MSI vector to be send\n \
+		vendor_id read->programmed vendor id (hex)\n\
+		vendor_id write->arg1 = vendor id(hex) to be programmed\n \
+		device_id read->programmed device id(hex)\n \
+		device_id write->arg1 = device id(hex) to be programmed\n \
+		bar0_size read->size of bar0 in hex\n \
+		bar0_size write->arg1= size of bar0 in hex\n \
+		(default bar0 size is 1000 (hex) bytes)\n \
+		bar0_address read->address of bar0 mapped area in hex\n \
+		bar0_address write->arg1 = address of bar0 mapped area in hex\n\
+		(default mapping of bar0 is SYSRAM1(E0800000)\n \
+		(always program bar size before bar address)\n \
+		(kernel might modify bar size and address to align)\n \
+		(read back bar size and address after writing to check)\n \
+		bar0_rw_offset read->offset of bar0 for which bar0_data \n \
+		will return value\n \
+		bar0_rw_offset write->arg1 = offset of bar0 for which\n \
+		bar0_data will write value\n \
+		bar0_data read->data at bar0_rw_offset\n \
+		bar0_data write->arg1 = data to be written at\n \
+		bar0_rw_offset\n";
+
+	int size = (sizeof(text) < PAGE_SIZE) ? sizeof(text) : PAGE_SIZE;
+
+	return snprintf(buf, size, "%s", text);
+}
+
+static DEVICE_ATTR(help, S_IRUGO, pcie_gadget_show_help, NULL);
+
+static struct attribute *pcie_gadget_attributes[] = {
+	&dev_attr_link.attr,
+	&dev_attr_int_type.attr,
+	&dev_attr_no_of_msi.attr,
+	&dev_attr_inta.attr,
+	&dev_attr_send_msi.attr,
+	&dev_attr_vendor_id.attr,
+	&dev_attr_device_id.attr,
+	&dev_attr_bar0_size.attr,
+	&dev_attr_bar0_address.attr,
+	&dev_attr_bar0_rw_offset.attr,
+	&dev_attr_bar0_data.attr,
+	&dev_attr_help.attr,
+	NULL
+};
+
+static const struct attribute_group pcie_gadget_attr_group = {
+	.attrs = pcie_gadget_attributes,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+	struct pcie_app_reg *app_reg =
+		(struct pcie_app_reg *)config->va_app_base;
+
+	/*setup registers for outbound translation */
+
+	writel(config->base, &app_reg->in0_mem_addr_start);
+	writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+			&app_reg->in0_mem_addr_limit);
+	writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+			&app_reg->in1_mem_addr_limit);
+	writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+	writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+			&app_reg->in_io_addr_limit);
+	writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+	writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+			&app_reg->in_cfg0_addr_limit);
+	writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+	writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+			&app_reg->in_cfg1_addr_limit);
+	writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+	writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+			&app_reg->in_msg_addr_limit);
+
+	writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+	writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+	/*setup registers for inbound translation */
+
+	/* Keep AORAM mapped at BAR0 as default */
+	config->bar0_size = INBOUND_ADDR_MASK + 1;
+	spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+	spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+	config->va_bar0_address = (u32)ioremap(SPEAR13XX_SYSRAM1_BASE,
+			config->bar0_size);
+
+	writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+	writel(0, &app_reg->pim1_mem_addr_start);
+	writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_rom_addr_start);
+
+	writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+			| ((u32)1 << REG_TRANSLATION_ENABLE),
+			&app_reg->app_ctrl_0);
+	/* disable all rx interrupts */
+	writel(0, &app_reg->int_mask);
+
+	/* Select INTA as default*/
+	spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+	struct resource *res0, *res1;
+	struct spear_pcie_gadget_config *config;
+	unsigned int status = 0;
+	int irq;
+	struct clk *clk;
+
+	/* get resource for application registers*/
+
+	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res0) {
+		dev_err(&pdev->dev, "no resource defined\n");
+		return -EBUSY;
+	}
+	if (!request_mem_region(res0->start, resource_size(res0),
+				pdev->name)) {
+		dev_err(&pdev->dev, "pcie gadget region already	claimed\n");
+		return -EBUSY;
+	}
+	/* get resource for dbi registers*/
+
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res1) {
+		dev_err(&pdev->dev, "no resource defined\n");
+		goto err_rel_res0;
+	}
+	if (!request_mem_region(res1->start, resource_size(res1),
+				pdev->name)) {
+		dev_err(&pdev->dev, "pcie gadget region already	claimed\n");
+		goto err_rel_res0;
+	}
+
+	config = kzalloc(sizeof(*config), GFP_KERNEL);
+	if (!config) {
+		dev_err(&pdev->dev, "out of memory\n");
+		status = -ENOMEM;
+		goto err_rel_res;
+	}
+
+	config->va_app_base = ioremap(res0->start, resource_size(res0));
+	if (!config->va_app_base) {
+		dev_err(&pdev->dev, "ioremap fail\n");
+		status = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	config->base = (void *)res1->start;
+
+	config->va_dbi_base = ioremap(res1->start, resource_size(res1));
+	if (!config->va_dbi_base) {
+		dev_err(&pdev->dev, "ioremap fail\n");
+		status = -ENOMEM;
+		goto err_iounmap_app;
+	}
+
+	dev_set_drvdata(&pdev->dev, config);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no update irq?\n");
+		status = irq;
+		goto err_iounmap;
+	}
+
+	status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+	if (status) {
+		dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+				claimed\n", irq);
+		goto err_get_irq;
+	}
+	/* Register sysfs hooks */
+	status = sysfs_create_group(&pdev->dev.kobj, &pcie_gadget_attr_group);
+	if (status)
+		goto err_irq;
+
+	/* init basic pcie application registers*/
+	/* do not enable clock if it is PCIE0.Ideally , all controller should
+	 * have been independent from others with respect to clock. But PCIE1
+	 * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.*/
+	if (pdev->id == 1) {
+		/* Ideally CFG Clock should have been also enabled here. But
+		 * it is done currently during board init routne*/
+		clk = clk_get_sys("pcie1", NULL);
+		if (!clk) {
+			pr_err("%s:couldn't get clk for pcie1\n", __func__);
+			goto err_irq;
+		}
+		if (clk_enable(clk)) {
+			pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+			goto err_irq;
+		}
+	} else if (pdev->id == 2) {
+		/* Ideally CFG Clock should have been also enabled here. But
+		 * it is done currently during board init routne*/
+		clk = clk_get_sys("pcie2", NULL);
+		if (!clk) {
+			pr_err("%s:couldn't get clk for pcie2\n", __func__);
+			goto err_irq;
+		}
+		if (clk_enable(clk)) {
+			pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+			goto err_irq;
+		}
+	}
+	spear13xx_pcie_device_init(config);
+
+	return 0;
+err_irq:
+	free_irq(irq, NULL);
+err_get_irq:
+	dev_set_drvdata(&pdev->dev, NULL);
+err_iounmap:
+	iounmap(config->va_dbi_base);
+err_iounmap_app:
+	iounmap(config->va_app_base);
+err_kzalloc:
+	kfree(config);
+err_rel_res:
+	release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+	release_mem_region(res0->start, resource_size(res0));
+	return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+	struct resource *res0, *res1;
+	struct spear_pcie_gadget_config *config;
+	int irq;
+
+	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	irq = platform_get_irq(pdev, 0);
+	config = dev_get_drvdata(&pdev->dev);
+
+	free_irq(irq, NULL);
+	dev_set_drvdata(&pdev->dev, NULL);
+	iounmap(config->va_dbi_base);
+	iounmap(config->va_app_base);
+	kfree(config);
+	release_mem_region(res1->start, resource_size(res1));
+	release_mem_region(res0->start, resource_size(res0));
+	sysfs_remove_group(&pdev->dev.kobj, &pcie_gadget_attr_group);
+
+	return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+	.probe = spear_pcie_gadget_probe,
+	.remove = spear_pcie_gadget_remove,
+	.shutdown = spear_pcie_gadget_shutdown,
+	.driver = {
+		.name = "pcie-gadget-spear",
+		.bus = &platform_bus_type
+	},
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+	return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+	platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
-- 
1.7.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists