| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4CA65931.1050105@vlnb.net>
Date: Sat, 02 Oct 2010 01:57:05 +0400
From: Vladislav Bolkhovitin <vst@...b.net>
To: linux-scsi@...r.kernel.org
CC: linux-kernel@...r.kernel.org,
scst-devel <scst-devel@...ts.sourceforge.net>,
James Bottomley <James.Bottomley@...senPartnership.com>,
Andrew Morton <akpm@...ux-foundation.org>,
FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
Mike Christie <michaelc@...wisc.edu>,
Vu Pham <vuhuong@...lanox.com>,
Bart Van Assche <bart.vanassche@...il.com>,
James Smart <James.Smart@...lex.Com>,
Joe Eykholt <jeykholt@...co.com>, Andy Yan <ayan@...vell.com>,
Chetan Loke <generationgnu@...oo.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Hannes Reinecke <hare@...e.de>,
Richard Sharpe <realrichardsharpe@...il.com>
Subject: [PATCH 16/19]: scst_local target driver
This patchset contains scst_local target driver with documentation.
This driver allows to access devices that are exported via SCST directly
on the same Linux system that they are exported from. Some highlights:
1. Fully zero-copy implementation with in-kernel dev handlers
2. Support for BIDI commands and long CDBs
3. Easy way to locate sg/bsg devices (LUNs) for each scst_local's session (Scsi_Host)
4. Allows to create several targets with several sessions (Scsi_Hosts) each
5. Allows for each target to set transport type (SCSI and physical transport
version descriptors)
6. Allows for each session set TransportID, used, e.g., to identify the 'I' part of
I_T nexus in Persistent Reservation commands
(3) means that each scst_local's session's SYSFS entry contains a link to the
corresponding SCSI host. Using it one can find local sg/bsg/sd/etc. devices of
this session. For instance, this links points out to host12, so you can find your
sg devices by:
$ lsscsi -g|grep "\[12:"
[12:0:0:0] disk SCST_FIO rd1 200 /dev/sdc /dev/sg2
[12:0:0:1] disk SCST_FIO nullio 200 /dev/sdd /dev/sg3
They are /dev/sg2 and /dev/sg3.
(4)-(6) allows creation of full features multi-transport/multi-initiator (I_T nexus)
SCST target drivers in user space, which can share devices with in-kernel target
drivers, i.e. all the reservations, including Persistent Reservations, and other
similar per-I_T nexus functionality will be done correctly.
The recommended workflow for a user space target driver:
1. For each SCSI target a user space target driver should create an
scst_local's target using "add_target" SYSFS command.
2. Then the user space target driver should, if needed, set its SCSI and
physical transport version descriptors (by default it is SAS) using SYSFS
attributes scsi_transport_version and phys_transport_version correspondingly in
/sys/kernel/scst_tgt/targets/scst_local/target_name directory.
3. For incoming session (I_T nexus) from an initiator the user space
target driver should create scst_local's session using "add_session" SYSFS
command.
4. Then, if needed, the user space target driver should set TransportID
for this session (I_T nexus) using attribute
/sys/kernel/scst_tgt/targets/scst_local/target_name/sessions/session_name/transport_id
5. Then the user space target driver should find out sg/bsg devices for
the LUNs the created session has using link
/sys/kernel/scst_tgt/targets/scst_local/target_name/sessions/session_name/host
as described above.
6. Then the user space target driver can start serving the initiator using
found sg/bsg devices.
For other connected initiators steps 3-6 should be repeated.
More info about scst_local driver you can find in the README.scst_local in the patch.
Signed-off-by: Richard Sharpe <realrichardsharpe@...il.com>
Signed-off-by: Vladislav Bolkhovitin <vst@...b.net>
---
Documentation/scst/README.scst_local | 231 +++++
drivers/scst/scst_local/Kconfig | 22
drivers/scst/scst_local/Makefile | 2
drivers/scst/scst_local/scst_local.c | 1452 +++++++++++++++++++++++++++++++++++
4 files changed, 1707 insertions(+)
diff -uprN orig/linux-2.6.35/drivers/scst/scst_local/Kconfig linux-2.6.35/drivers/scst/scst_local/Kconfig
--- orig/linux-2.6.35/drivers/scst/scst_local/Kconfig
+++ linux-2.6.35/drivers/scst/scst_local/Kconfig
@@ -0,0 +1,22 @@
+config SCST_LOCAL
+ tristate "SCST Local driver"
+ depends on SCST && !HIGHMEM4G && !HIGHMEM64G
+ ---help---
+ This module provides a LLD SCSI driver that connects to
+ the SCST target mode subsystem in a loop-back manner.
+ It allows you to test target-mode device-handlers locally.
+ You will need the SCST subsystem as well.
+
+ If unsure whether you really want or need this, say N.
+
+config SCST_LOCAL_FORCE_DIRECT_PROCESSING
+ bool "Force local processing"
+ depends on SCST_LOCAL
+ help
+ This experimental option forces scst_local to make SCST process
+ SCSI commands in the same context, in which they was submitted.
+ Otherwise, they will be processed in SCST threads. Setting this
+ option to "Y" will give some performance increase, but might be
+ unsafe.
+
+ If unsure, say "N".
diff -uprN orig/linux-2.6.35/drivers/scst/scst_local/Makefile linux-2.6.35/drivers/scst/scst_local/Makefile
--- orig/linux-2.6.35/drivers/scst/scst_local/Makefile
+++ linux-2.6.35/drivers/scst/scst_local/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_SCST_LOCAL) += scst_local.o
+
diff -uprN orig/linux-2.6.35/drivers/scst/scst_local/scst_local.c linux-2.6.35/drivers/scst/scst_local/scst_local.c
--- orig/linux-2.6.35/drivers/scst/scst_local/scst_local.c
+++ linux-2.6.35/drivers/scst/scst_local/scst_local.c
@@ -0,0 +1,1452 @@
+/*
+ * Copyright (C) 2008 - 2010 Richard Sharpe
+ * Copyright (C) 1992 Eric Youngdale
+ * Copyright (C) 2008 - 2010 Vladislav Bolkhovitin <vst@...b.net>
+ *
+ * Simulate a host adapter and an SCST target adapter back to back
+ *
+ * Based on the scsi_debug.c driver originally by Eric Youngdale and
+ * others, including D Gilbert et al
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#define LOG_PREFIX "scst_local"
+
+/* SCST includes ... */
+#include <scst/scst_const.h>
+#include <scst/scst.h>
+#include <scst/scst_debug.h>
+
+#ifdef CONFIG_SCST_DEBUG
+#define SCST_LOCAL_DEFAULT_LOG_FLAGS (TRACE_FUNCTION | TRACE_PID | \
+ TRACE_LINE | TRACE_OUT_OF_MEM | TRACE_MGMT | TRACE_MGMT_DEBUG | \
+ TRACE_MINOR | TRACE_SPECIAL)
+#else
+# ifdef CONFIG_SCST_TRACING
+#define SCST_LOCAL_DEFAULT_LOG_FLAGS (TRACE_OUT_OF_MEM | TRACE_MGMT | \
+ TRACE_SPECIAL)
+# endif
+#endif
+
+#if defined(CONFIG_SCST_DEBUG) || defined(CONFIG_SCST_TRACING)
+#define trace_flag scst_local_trace_flag
+static unsigned long scst_local_trace_flag = SCST_LOCAL_DEFAULT_LOG_FLAGS;
+#endif
+
+#define TRUE 1
+#define FALSE 0
+
+#define SCST_LOCAL_VERSION "1.0.0"
+static const char *scst_local_version_date = "20100910";
+
+/* Some statistics */
+static atomic_t num_aborts = ATOMIC_INIT(0);
+static atomic_t num_dev_resets = ATOMIC_INIT(0);
+static atomic_t num_target_resets = ATOMIC_INIT(0);
+
+static bool scst_local_add_default_tgt;
+module_param_named(add_default_tgt, scst_local_add_default_tgt, bool, S_IRUGO);
+MODULE_PARM_DESC(add_default_tgt, "add or not (default) on start default "
+ "target scst_local_tgt with default session scst_local_host");
+
+struct scst_aen_work_item {
+ struct list_head work_list_entry;
+ struct scst_aen *aen;
+};
+
+struct scst_local_tgt {
+ struct scst_tgt *scst_tgt;
+ struct list_head sessions_list; /* protected by scst_local_mutex */
+ struct list_head tgts_list_entry;
+
+ /* SCSI version descriptors */
+ uint16_t scsi_transport_version;
+ uint16_t phys_transport_version;
+};
+
+struct scst_local_sess {
+ struct scst_session *scst_sess;
+
+ unsigned int unregistering:1;
+
+ struct device dev;
+ struct Scsi_Host *shost;
+ struct scst_local_tgt *tgt;
+
+ int number;
+
+ struct mutex tr_id_mutex;
+ uint8_t *transport_id;
+ int transport_id_len;
+
+ struct work_struct aen_work;
+ spinlock_t aen_lock;
+ struct list_head aen_work_list; /* protected by aen_lock */
+
+ struct list_head sessions_list_entry;
+};
+
+#define to_scst_lcl_sess(d) \
+ container_of(d, struct scst_local_sess, dev)
+
+static int __scst_local_add_adapter(struct scst_local_tgt *tgt,
+ const char *initiator_name, struct scst_local_sess **out_sess,
+ bool locked);
+static int scst_local_add_adapter(struct scst_local_tgt *tgt,
+ const char *initiator_name, struct scst_local_sess **out_sess);
+static void scst_local_remove_adapter(struct scst_local_sess *sess);
+static int scst_local_add_target(const char *target_name,
+ struct scst_local_tgt **out_tgt);
+static void __scst_local_remove_target(struct scst_local_tgt *tgt);
+static void scst_local_remove_target(struct scst_local_tgt *tgt);
+
+static atomic_t scst_local_sess_num = ATOMIC_INIT(0);
+
+static LIST_HEAD(scst_local_tgts_list);
+static DEFINE_MUTEX(scst_local_mutex);
+
+static DECLARE_RWSEM(scst_local_exit_rwsem);
+
+MODULE_AUTHOR("Richard Sharpe, Vladislav Bolkhovitin + ideas from SCSI_DEBUG");
+MODULE_DESCRIPTION("SCSI+SCST local adapter driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(SCST_LOCAL_VERSION);
+
+static int scst_local_get_sas_transport_id(struct scst_local_sess *sess,
+ uint8_t **transport_id, int *len)
+{
+ int res = 0;
+ int tr_id_size = 0;
+ uint8_t *tr_id = NULL;
+
+ tr_id_size = 24; /* A SAS TransportID */
+
+ tr_id = kzalloc(tr_id_size, GFP_KERNEL);
+ if (tr_id == NULL) {
+ PRINT_ERROR("Allocation of TransportID (size %d) failed",
+ tr_id_size);
+ res = -ENOMEM;
+ goto out;
+ }
+
+ tr_id[0] = 0x00 | SCSI_TRANSPORTID_PROTOCOLID_SAS;
+
+ /*
+ * Assemble a valid SAS address = 0x5OOUUIIR12345678 ... Does SCST
+ * have one?
+ */
+
+ tr_id[4] = 0x5F;
+ tr_id[5] = 0xEE;
+ tr_id[6] = 0xDE;
+ tr_id[7] = 0x40 | ((sess->number >> 4) & 0x0F);
+ tr_id[8] = 0x0F | (sess->number & 0xF0);
+ tr_id[9] = 0xAD;
+ tr_id[10] = 0xE0;
+ tr_id[11] = 0x50;
+
+ *transport_id = tr_id;
+ *len = tr_id_size;
+
+ TRACE_DBG("Created tid '%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X'",
+ tr_id[4], tr_id[5], tr_id[6], tr_id[7],
+ tr_id[8], tr_id[9], tr_id[10], tr_id[11]);
+
+out:
+ return res;
+}
+
+static int scst_local_get_initiator_port_transport_id(
+ struct scst_session *scst_sess, uint8_t **transport_id)
+{
+ int res = 0;
+ int tr_id_size = 0;
+ uint8_t *tr_id = NULL;
+ struct scst_local_sess *sess;
+
+ if (scst_sess == NULL) {
+ res = SCSI_TRANSPORTID_PROTOCOLID_SAS;
+ goto out;
+ }
+
+ sess = (struct scst_local_sess *)scst_sess_get_tgt_priv(scst_sess);
+
+ mutex_lock(&sess->tr_id_mutex);
+
+ if (sess->transport_id == NULL) {
+ res = scst_local_get_sas_transport_id(sess,
+ transport_id, &tr_id_size);
+ goto out_unlock;
+ }
+
+ tr_id_size = sess->transport_id_len;
+ BUG_ON(tr_id_size == 0);
+
+ tr_id = kzalloc(tr_id_size, GFP_KERNEL);
+ if (tr_id == NULL) {
+ PRINT_ERROR("Allocation of TransportID (size %d) failed",
+ tr_id_size);
+ res = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(tr_id, sess->transport_id, sess->transport_id_len);
+
+out_unlock:
+ mutex_unlock(&sess->tr_id_mutex);
+
+out:
+ return res;
+}
+
+/**
+ ** Tgtt attributes
+ **/
+
+static ssize_t scst_local_version_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ sprintf(buf, "%s/%s\n", SCST_LOCAL_VERSION, scst_local_version_date);
+
+#ifdef CONFIG_SCST_EXTRACHECKS
+ strcat(buf, "EXTRACHECKS\n");
+#endif
+
+#ifdef CONFIG_SCST_TRACING
+ strcat(buf, "TRACING\n");
+#endif
+
+#ifdef CONFIG_SCST_DEBUG
+ strcat(buf, "DEBUG\n");
+#endif
+ return strlen(buf);
+}
+
+static struct kobj_attribute scst_local_version_attr =
+ __ATTR(version, S_IRUGO, scst_local_version_show, NULL);
+
+static ssize_t scst_local_stats_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+
+{
+ return sprintf(buf, "Aborts: %d, Device Resets: %d, Target Resets: %d",
+ atomic_read(&num_aborts), atomic_read(&num_dev_resets),
+ atomic_read(&num_target_resets));
+}
+
+static struct kobj_attribute scst_local_stats_attr =
+ __ATTR(stats, S_IRUGO, scst_local_stats_show, NULL);
+
+static const struct attribute *scst_local_tgtt_attrs[] = {
+ &scst_local_version_attr.attr,
+ &scst_local_stats_attr.attr,
+ NULL,
+};
+
+/**
+ ** Tgt attributes
+ **/
+
+static ssize_t scst_local_scsi_transport_version_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ struct scst_tgt *scst_tgt;
+ struct scst_local_tgt *tgt;
+ ssize_t res;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ scst_tgt = container_of(kobj, struct scst_tgt, tgt_kobj);
+ tgt = (struct scst_local_tgt *)scst_tgt_get_tgt_priv(scst_tgt);
+
+ if (tgt->scsi_transport_version != 0)
+ res = sprintf(buf, "0x%x\n%s", tgt->scsi_transport_version,
+ SCST_SYSFS_KEY_MARK "\n");
+ else
+ res = sprintf(buf, "0x%x\n", 0x0BE0); /* SAS */
+
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static ssize_t scst_local_scsi_transport_version_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buffer, size_t size)
+{
+ ssize_t res;
+ struct scst_tgt *scst_tgt;
+ struct scst_local_tgt *tgt;
+ unsigned long val;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ scst_tgt = container_of(kobj, struct scst_tgt, tgt_kobj);
+ tgt = (struct scst_local_tgt *)scst_tgt_get_tgt_priv(scst_tgt);
+
+ res = strict_strtoul(buffer, 0, &val);
+ if (res != 0) {
+ PRINT_ERROR("strict_strtoul() for %s failed: %zd", buffer, res);
+ goto out_up;
+ }
+
+ tgt->scsi_transport_version = val;
+
+ res = size;
+
+out_up:
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static struct kobj_attribute scst_local_scsi_transport_version_attr =
+ __ATTR(scsi_transport_version, S_IRUGO | S_IWUSR,
+ scst_local_scsi_transport_version_show,
+ scst_local_scsi_transport_version_store);
+
+static ssize_t scst_local_phys_transport_version_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ struct scst_tgt *scst_tgt;
+ struct scst_local_tgt *tgt;
+ ssize_t res;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ scst_tgt = container_of(kobj, struct scst_tgt, tgt_kobj);
+ tgt = (struct scst_local_tgt *)scst_tgt_get_tgt_priv(scst_tgt);
+
+ res = sprintf(buf, "0x%x\n%s", tgt->phys_transport_version,
+ (tgt->phys_transport_version != 0) ?
+ SCST_SYSFS_KEY_MARK "\n" : "");
+
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static ssize_t scst_local_phys_transport_version_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buffer, size_t size)
+{
+ ssize_t res;
+ struct scst_tgt *scst_tgt;
+ struct scst_local_tgt *tgt;
+ unsigned long val;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ scst_tgt = container_of(kobj, struct scst_tgt, tgt_kobj);
+ tgt = (struct scst_local_tgt *)scst_tgt_get_tgt_priv(scst_tgt);
+
+ res = strict_strtoul(buffer, 0, &val);
+ if (res != 0) {
+ PRINT_ERROR("strict_strtoul() for %s failed: %zd", buffer, res);
+ goto out_up;
+ }
+
+ tgt->phys_transport_version = val;
+
+ res = size;
+
+out_up:
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static struct kobj_attribute scst_local_phys_transport_version_attr =
+ __ATTR(phys_transport_version, S_IRUGO | S_IWUSR,
+ scst_local_phys_transport_version_show,
+ scst_local_phys_transport_version_store);
+
+static const struct attribute *scst_local_tgt_attrs[] = {
+ &scst_local_scsi_transport_version_attr.attr,
+ &scst_local_phys_transport_version_attr.attr,
+ NULL,
+};
+
+/**
+ ** Session attributes
+ **/
+
+static ssize_t scst_local_transport_id_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ ssize_t res;
+ struct scst_session *scst_sess;
+ struct scst_local_sess *sess;
+ uint8_t *tr_id;
+ int tr_id_len, i;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ scst_sess = container_of(kobj, struct scst_session, sess_kobj);
+ sess = (struct scst_local_sess *)scst_sess_get_tgt_priv(scst_sess);
+
+ mutex_lock(&sess->tr_id_mutex);
+
+ if (sess->transport_id != NULL) {
+ tr_id = sess->transport_id;
+ tr_id_len = sess->transport_id_len;
+ } else {
+ res = scst_local_get_sas_transport_id(sess, &tr_id, &tr_id_len);
+ if (res != 0)
+ goto out_unlock;
+ }
+
+ res = 0;
+ for (i = 0; i < tr_id_len; i++)
+ res += sprintf(&buf[res], "%c", tr_id[i]);
+
+ if (sess->transport_id == NULL)
+ kfree(tr_id);
+
+out_unlock:
+ mutex_unlock(&sess->tr_id_mutex);
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static ssize_t scst_local_transport_id_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buffer, size_t size)
+{
+ ssize_t res;
+ struct scst_session *scst_sess;
+ struct scst_local_sess *sess;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ scst_sess = container_of(kobj, struct scst_session, sess_kobj);
+ sess = (struct scst_local_sess *)scst_sess_get_tgt_priv(scst_sess);
+
+ mutex_lock(&sess->tr_id_mutex);
+
+ if (sess->transport_id != NULL) {
+ kfree(sess->transport_id);
+ sess->transport_id = NULL;
+ sess->transport_id_len = 0;
+ }
+
+ if (size == 0)
+ goto out_res;
+
+ sess->transport_id = kzalloc(size, GFP_KERNEL);
+ if (sess->transport_id == NULL) {
+ PRINT_ERROR("Allocation of transport_id (size %zd) failed",
+ size);
+ res = -ENOMEM;
+ goto out_unlock;
+ }
+
+ sess->transport_id_len = size;
+
+ memcpy(sess->transport_id, buffer, sess->transport_id_len);
+
+out_res:
+ res = size;
+
+out_unlock:
+ mutex_unlock(&sess->tr_id_mutex);
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static struct kobj_attribute scst_local_transport_id_attr =
+ __ATTR(transport_id, S_IRUGO | S_IWUSR,
+ scst_local_transport_id_show,
+ scst_local_transport_id_store);
+
+static const struct attribute *scst_local_sess_attrs[] = {
+ &scst_local_transport_id_attr.attr,
+ NULL,
+};
+
+static ssize_t scst_local_sysfs_add_target(const char *target_name, char *params)
+{
+ int res;
+ struct scst_local_tgt *tgt;
+ char *param, *p;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ res = scst_local_add_target(target_name, &tgt);
+ if (res != 0)
+ goto out_up;
+
+ while (1) {
+ param = scst_get_next_token_str(¶ms);
+ if (param == NULL)
+ break;
+
+ p = scst_get_next_lexem(¶m);
+ if (*p == '\0')
+ break;
+
+ if (strcasecmp("session_name", p) != 0) {
+ PRINT_ERROR("Unknown parameter %s", p);
+ res = -EINVAL;
+ goto out_remove;
+ }
+
+ p = scst_get_next_lexem(¶m);
+ if (*p == '\0') {
+ PRINT_ERROR("Wrong session name %s", p);
+ res = -EINVAL;
+ goto out_remove;
+ }
+
+ res = scst_local_add_adapter(tgt, p, NULL);
+ if (res != 0)
+ goto out_remove;
+ }
+
+out_up:
+ up_read(&scst_local_exit_rwsem);
+ return res;
+
+out_remove:
+ scst_local_remove_target(tgt);
+ goto out_up;
+}
+
+static ssize_t scst_local_sysfs_del_target(const char *target_name)
+{
+ int res;
+ struct scst_local_tgt *tgt;
+ bool deleted = false;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ mutex_lock(&scst_local_mutex);
+ list_for_each_entry(tgt, &scst_local_tgts_list, tgts_list_entry) {
+ if (strcmp(target_name, tgt->scst_tgt->tgt_name) == 0) {
+ __scst_local_remove_target(tgt);
+ deleted = true;
+ break;
+ }
+ }
+ mutex_unlock(&scst_local_mutex);
+
+ if (!deleted) {
+ PRINT_ERROR("Target %s not found", target_name);
+ res = -ENOENT;
+ goto out_up;
+ }
+
+ res = 0;
+
+out_up:
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static ssize_t scst_local_sysfs_mgmt_cmd(char *buf)
+{
+ ssize_t res;
+ char *command, *target_name, *session_name;
+ struct scst_local_tgt *t, *tgt;
+
+ if (down_read_trylock(&scst_local_exit_rwsem) == 0)
+ return -ENOENT;
+
+ command = scst_get_next_lexem(&buf);
+
+ target_name = scst_get_next_lexem(&buf);
+ if (*target_name == '\0') {
+ PRINT_ERROR("%s", "Target name required");
+ res = -EINVAL;
+ goto out_up;
+ }
+
+ mutex_lock(&scst_local_mutex);
+
+ tgt = NULL;
+ list_for_each_entry(t, &scst_local_tgts_list, tgts_list_entry) {
+ if (strcmp(t->scst_tgt->tgt_name, target_name) == 0) {
+ tgt = t;
+ break;
+ }
+ }
+ if (tgt == NULL) {
+ PRINT_ERROR("Target %s not found", target_name);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ session_name = scst_get_next_lexem(&buf);
+ if (*session_name == '\0') {
+ PRINT_ERROR("%s", "Session name required");
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ if (strcasecmp("add_session", command) == 0) {
+ res = __scst_local_add_adapter(tgt, session_name, NULL, true);
+ } else if (strcasecmp("del_session", command) == 0) {
+ struct scst_local_sess *s, *sess = NULL;
+ list_for_each_entry(s, &tgt->sessions_list,
+ sessions_list_entry) {
+ if (strcmp(s->scst_sess->initiator_name, session_name) == 0) {
+ sess = s;
+ break;
+ }
+ }
+ if (sess == NULL) {
+ PRINT_ERROR("Session %s not found (target %s)",
+ session_name, target_name);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ scst_local_remove_adapter(sess);
+ }
+
+ res = 0;
+
+out_unlock:
+ mutex_unlock(&scst_local_mutex);
+
+out_up:
+ up_read(&scst_local_exit_rwsem);
+ return res;
+}
+
+static int scst_local_abort(struct scsi_cmnd *SCpnt)
+{
+ struct scst_local_sess *sess;
+ int ret;
+ DECLARE_COMPLETION_ONSTACK(dev_reset_completion);
+
+ sess = to_scst_lcl_sess(scsi_get_device(SCpnt->device->host));
+
+ ret = scst_rx_mgmt_fn_tag(sess->scst_sess, SCST_ABORT_TASK, SCpnt->tag,
+ FALSE, &dev_reset_completion);
+
+ /* Now wait for the completion ... */
+ wait_for_completion_interruptible(&dev_reset_completion);
+
+ atomic_inc(&num_aborts);
+
+ if (ret == 0)
+ ret = SUCCESS;
+ return ret;
+}
+
+static int scst_local_device_reset(struct scsi_cmnd *SCpnt)
+{
+ struct scst_local_sess *sess;
+ __be16 lun;
+ int ret;
+ DECLARE_COMPLETION_ONSTACK(dev_reset_completion);
+
+ sess = to_scst_lcl_sess(scsi_get_device(SCpnt->device->host));
+
+ lun = cpu_to_be16(SCpnt->device->lun);
+
+ ret = scst_rx_mgmt_fn_lun(sess->scst_sess, SCST_LUN_RESET,
+ (const uint8_t *)&lun, sizeof(lun), FALSE,
+ &dev_reset_completion);
+
+ /* Now wait for the completion ... */
+ wait_for_completion_interruptible(&dev_reset_completion);
+
+ atomic_inc(&num_dev_resets);
+
+ if (ret == 0)
+ ret = SUCCESS;
+ return ret;
+}
+
+static int scst_local_target_reset(struct scsi_cmnd *SCpnt)
+{
+ struct scst_local_sess *sess;
+ __be16 lun;
+ int ret;
+ DECLARE_COMPLETION_ONSTACK(dev_reset_completion);
+
+ sess = to_scst_lcl_sess(scsi_get_device(SCpnt->device->host));
+
+ lun = cpu_to_be16(SCpnt->device->lun);
+
+ ret = scst_rx_mgmt_fn_lun(sess->scst_sess, SCST_TARGET_RESET,
+ (const uint8_t *)&lun, sizeof(lun), FALSE,
+ &dev_reset_completion);
+
+ /* Now wait for the completion ... */
+ wait_for_completion_interruptible(&dev_reset_completion);
+
+ atomic_inc(&num_target_resets);
+
+ if (ret == 0)
+ ret = SUCCESS;
+ return ret;
+}
+
+static void copy_sense(struct scsi_cmnd *cmnd, struct scst_cmd *scst_cmnd)
+{
+ int scst_cmnd_sense_len = scst_cmd_get_sense_buffer_len(scst_cmnd);
+
+ scst_cmnd_sense_len = (SCSI_SENSE_BUFFERSIZE < scst_cmnd_sense_len ?
+ SCSI_SENSE_BUFFERSIZE : scst_cmnd_sense_len);
+ memcpy(cmnd->sense_buffer, scst_cmd_get_sense_buffer(scst_cmnd),
+ scst_cmnd_sense_len);
+
+ TRACE_BUFFER("Sense set", cmnd->sense_buffer, scst_cmnd_sense_len);
+ return;
+}
+
+/*
+ * Utility function to handle processing of done and allow
+ * easy insertion of error injection if desired
+ */
+static int scst_local_send_resp(struct scsi_cmnd *cmnd,
+ struct scst_cmd *scst_cmnd,
+ void (*done)(struct scsi_cmnd *),
+ int scsi_result)
+{
+ int ret = 0;
+
+ if (scst_cmnd) {
+ /* The buffer isn't ours, so let's be safe and restore it */
+ scst_check_restore_sg_buff(scst_cmnd);
+
+ /* Simulate autosense by this driver */
+ if (unlikely(SCST_SENSE_VALID(scst_cmnd->sense)))
+ copy_sense(cmnd, scst_cmnd);
+ }
+
+ cmnd->result = scsi_result;
+
+ done(cmnd);
+ return ret;
+}
+
+/*
+ * This does the heavy lifting ... we pass all the commands on to the
+ * target driver and have it do its magic ...
+ */
+static int scst_local_queuecommand(struct scsi_cmnd *SCpnt,
+ void (*done)(struct scsi_cmnd *))
+ __acquires(&h->host_lock)
+ __releases(&h->host_lock)
+{
+ struct scst_local_sess *sess;
+ struct scatterlist *sgl = NULL;
+ int sgl_count = 0;
+ __be16 lun;
+ struct scst_cmd *scst_cmd = NULL;
+ scst_data_direction dir;
+
+ TRACE_DBG("lun %d, cmd: 0x%02X", SCpnt->device->lun, SCpnt->cmnd[0]);
+
+ sess = to_scst_lcl_sess(scsi_get_device(SCpnt->device->host));
+
+ scsi_set_resid(SCpnt, 0);
+
+ /*
+ * We save a pointer to the done routine in SCpnt->scsi_done and
+ * we save that as tgt specific stuff below.
+ */
+ SCpnt->scsi_done = done;
+
+ /*
+ * Tell the target that we have a command ... but first we need
+ * to get the LUN into a format that SCST understand
+ */
+ lun = cpu_to_be16(SCpnt->device->lun);
+ scst_cmd = scst_rx_cmd(sess->scst_sess, (const uint8_t *)&lun,
+ sizeof(lun), SCpnt->cmnd, SCpnt->cmd_len, TRUE);
+ if (!scst_cmd) {
+ PRINT_ERROR("%s", "scst_rx_cmd() failed");
+ return -ENOMEM;
+ }
+
+ scst_cmd_set_tag(scst_cmd, SCpnt->tag);
+ switch (scsi_get_tag_type(SCpnt->device)) {
+ case MSG_SIMPLE_TAG:
+ scst_cmd_set_queue_type(scst_cmd, SCST_CMD_QUEUE_SIMPLE);
+ break;
+ case MSG_HEAD_TAG:
+ scst_cmd_set_queue_type(scst_cmd, SCST_CMD_QUEUE_HEAD_OF_QUEUE);
+ break;
+ case MSG_ORDERED_TAG:
+ scst_cmd_set_queue_type(scst_cmd, SCST_CMD_QUEUE_ORDERED);
+ break;
+ case SCSI_NO_TAG:
+ default:
+ scst_cmd_set_queue_type(scst_cmd, SCST_CMD_QUEUE_UNTAGGED);
+ break;
+ }
+
+ sgl = scsi_sglist(SCpnt);
+ sgl_count = scsi_sg_count(SCpnt);
+
+ dir = SCST_DATA_NONE;
+ switch (SCpnt->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ dir = SCST_DATA_WRITE;
+ scst_cmd_set_expected(scst_cmd, dir, scsi_bufflen(SCpnt));
+ scst_cmd_set_tgt_sg(scst_cmd, sgl, sgl_count);
+ break;
+ case DMA_FROM_DEVICE:
+ dir = SCST_DATA_READ;
+ scst_cmd_set_expected(scst_cmd, dir, scsi_bufflen(SCpnt));
+ scst_cmd_set_tgt_sg(scst_cmd, sgl, sgl_count);
+ break;
+ case DMA_BIDIRECTIONAL:
+ /* Some of these symbols are only defined after 2.6.24 */
+ dir = SCST_DATA_BIDI;
+ scst_cmd_set_expected(scst_cmd, dir, scsi_bufflen(SCpnt));
+ scst_cmd_set_expected_out_transfer_len(scst_cmd,
+ scsi_in(SCpnt)->length);
+ scst_cmd_set_tgt_sg(scst_cmd, scsi_in(SCpnt)->table.sgl,
+ scsi_in(SCpnt)->table.nents);
+ scst_cmd_set_tgt_out_sg(scst_cmd, sgl, sgl_count);
+ break;
+ case DMA_NONE:
+ default:
+ dir = SCST_DATA_NONE;
+ scst_cmd_set_expected(scst_cmd, dir, 0);
+ break;
+ }
+
+ /* Save the correct thing below depending on version */
+ scst_cmd_set_tgt_priv(scst_cmd, SCpnt);
+
+#ifdef CONFIG_SCST_LOCAL_FORCE_DIRECT_PROCESSING
+ {
+ struct Scsi_Host *h = SCpnt->device->host;
+ spin_unlock_irq(h->host_lock);
+ scst_cmd_init_done(scst_cmd, scst_estimate_context_direct());
+ spin_lock_irq(h->host_lock);
+ }
+#else
+ /*
+ * Unfortunately, we called with IRQs disabled, so have no choice,
+ * except to pass to the thread context.
+ */
+ scst_cmd_init_done(scst_cmd, SCST_CONTEXT_THREAD);
+#endif
+ return 0;
+}
+
+static int scst_local_targ_pre_exec(struct scst_cmd *scst_cmd)
+{
+ int res = SCST_PREPROCESS_STATUS_SUCCESS;
+
+ if (scst_cmd_get_dh_data_buff_alloced(scst_cmd) &&
+ (scst_cmd_get_data_direction(scst_cmd) & SCST_DATA_WRITE))
+ scst_copy_sg(scst_cmd, SCST_SG_COPY_FROM_TARGET);
+ return res;
+}
+
+/* Must be called under sess->aen_lock. Drops then reacquires it inside. */
+static void scst_process_aens(struct scst_local_sess *sess,
+ bool cleanup_only)
+ __releases(&sess->aen_lock)
+ __acquires(&sess->aen_lock)
+{
+ struct scst_aen_work_item *work_item = NULL;
+
+ TRACE_DBG("Target work sess %p", sess);
+
+ while (!list_empty(&sess->aen_work_list)) {
+ work_item = list_entry(sess->aen_work_list.next,
+ struct scst_aen_work_item, work_list_entry);
+ list_del(&work_item->work_list_entry);
+
+ spin_unlock(&sess->aen_lock);
+
+ if (cleanup_only)
+ goto done;
+
+ BUG_ON(work_item->aen->event_fn != SCST_AEN_SCSI);
+
+ /* Let's always rescan */
+ scsi_scan_target(&sess->shost->shost_gendev, 0, 0,
+ SCAN_WILD_CARD, 1);
+
+done:
+ scst_aen_done(work_item->aen);
+ kfree(work_item);
+
+ spin_lock(&sess->aen_lock);
+ }
+ return;
+}
+
+static void scst_aen_work_fn(struct work_struct *work)
+{
+ struct scst_local_sess *sess =
+ container_of(work, struct scst_local_sess, aen_work);
+
+ TRACE_MGMT_DBG("Target work %p)", sess);
+
+ spin_lock(&sess->aen_lock);
+ scst_process_aens(sess, false);
+ spin_unlock(&sess->aen_lock);
+ return;
+}
+
+static int scst_local_report_aen(struct scst_aen *aen)
+{
+ int res = 0;
+ int event_fn = scst_aen_get_event_fn(aen);
+ struct scst_local_sess *sess;
+ struct scst_aen_work_item *work_item = NULL;
+
+ sess = (struct scst_local_sess *)scst_sess_get_tgt_priv(
+ scst_aen_get_sess(aen));
+ switch (event_fn) {
+ case SCST_AEN_SCSI:
+ /*
+ * Allocate a work item and place it on the queue
+ */
+ work_item = kzalloc(sizeof(*work_item), GFP_KERNEL);
+ if (!work_item) {
+ PRINT_ERROR("%s", "Unable to allocate work item "
+ "to handle AEN!");
+ return -ENOMEM;
+ }
+
+ spin_lock(&sess->aen_lock);
+
+ if (unlikely(sess->unregistering)) {
+ spin_unlock(&sess->aen_lock);
+ kfree(work_item);
+ res = SCST_AEN_RES_NOT_SUPPORTED;
+ goto out;
+ }
+
+ list_add_tail(&work_item->work_list_entry, &sess->aen_work_list);
+ work_item->aen = aen;
+
+ spin_unlock(&sess->aen_lock);
+
+ schedule_work(&sess->aen_work);
+ break;
+
+ default:
+ TRACE_MGMT_DBG("Unsupported AEN %d", event_fn);
+ res = SCST_AEN_RES_NOT_SUPPORTED;
+ break;
+ }
+
+out:
+ return res;
+}
+
+static int scst_local_targ_detect(struct scst_tgt_template *tgt_template)
+{
+ return 0;
+};
+
+static int scst_local_targ_release(struct scst_tgt *tgt)
+{
+ return 0;
+}
+
+static int scst_local_targ_xmit_response(struct scst_cmd *scst_cmd)
+{
+ struct scsi_cmnd *SCpnt = NULL;
+ void (*done)(struct scsi_cmnd *);
+
+ if (unlikely(scst_cmd_aborted(scst_cmd))) {
+ scst_set_delivery_status(scst_cmd, SCST_CMD_DELIVERY_ABORTED);
+ scst_tgt_cmd_done(scst_cmd, SCST_CONTEXT_SAME);
+ return SCST_TGT_RES_SUCCESS;
+ }
+
+ if (scst_cmd_get_dh_data_buff_alloced(scst_cmd) &&
+ (scst_cmd_get_data_direction(scst_cmd) & SCST_DATA_READ))
+ scst_copy_sg(scst_cmd, SCST_SG_COPY_TO_TARGET);
+
+ SCpnt = scst_cmd_get_tgt_priv(scst_cmd);
+ done = SCpnt->scsi_done;
+
+ /*
+ * This might have to change to use the two status flags
+ */
+ if (scst_cmd_get_is_send_status(scst_cmd)) {
+ int resid = 0, out_resid = 0;
+
+ /* Calculate the residual ... */
+ if (likely(!scst_get_resid(scst_cmd, &resid, &out_resid))) {
+ TRACE_DBG("No residuals for request %p", SCpnt);
+ } else {
+ if (out_resid != 0)
+ PRINT_ERROR("Unable to return OUT residual %d "
+ "(op %02x)", out_resid, SCpnt->cmnd[0]);
+ }
+
+ scsi_set_resid(SCpnt, resid);
+
+ /*
+ * It seems like there is no way to set out_resid ...
+ */
+
+ (void)scst_local_send_resp(SCpnt, scst_cmd, done,
+ scst_cmd_get_status(scst_cmd));
+ }
+
+ /* Now tell SCST that the command is done ... */
+ scst_tgt_cmd_done(scst_cmd, SCST_CONTEXT_SAME);
+ return SCST_TGT_RES_SUCCESS;
+}
+
+static void scst_local_targ_task_mgmt_done(struct scst_mgmt_cmd *mgmt_cmd)
+{
+ struct completion *compl;
+
+ compl = (struct completion *)scst_mgmt_cmd_get_tgt_priv(mgmt_cmd);
+ if (compl)
+ complete(compl);
+ return;
+}
+
+static uint16_t scst_local_get_scsi_transport_version(struct scst_tgt *scst_tgt)
+{
+ struct scst_local_tgt *tgt;
+
+ tgt = (struct scst_local_tgt *)scst_tgt_get_tgt_priv(scst_tgt);
+
+ if (tgt->scsi_transport_version == 0)
+ return 0x0BE0; /* SAS */
+ else
+ return tgt->scsi_transport_version;
+}
+
+static uint16_t scst_local_get_phys_transport_version(struct scst_tgt *scst_tgt)
+{
+ struct scst_local_tgt *tgt;
+
+ tgt = (struct scst_local_tgt *)scst_tgt_get_tgt_priv(scst_tgt);
+
+ return tgt->phys_transport_version;
+}
+
+static struct scst_tgt_template scst_local_targ_tmpl = {
+ .name = "scst_local",
+ .sg_tablesize = 0xffff,
+ .xmit_response_atomic = 1,
+ .enabled_attr_not_needed = 1,
+ .tgtt_attrs = scst_local_tgtt_attrs,
+ .tgt_attrs = scst_local_tgt_attrs,
+ .sess_attrs = scst_local_sess_attrs,
+ .add_target = scst_local_sysfs_add_target,
+ .del_target = scst_local_sysfs_del_target,
+ .mgmt_cmd = scst_local_sysfs_mgmt_cmd,
+ .add_target_parameters = "session_name",
+ .mgmt_cmd_help = " echo \"add_session target_name session_name\" >mgmt\n"
+ " echo \"del_session target_name session_name\" >mgmt\n",
+ .detect = scst_local_targ_detect,
+ .release = scst_local_targ_release,
+ .pre_exec = scst_local_targ_pre_exec,
+ .xmit_response = scst_local_targ_xmit_response,
+ .task_mgmt_fn_done = scst_local_targ_task_mgmt_done,
+ .report_aen = scst_local_report_aen,
+ .get_initiator_port_transport_id = scst_local_get_initiator_port_transport_id,
+ .get_scsi_transport_version = scst_local_get_scsi_transport_version,
+ .get_phys_transport_version = scst_local_get_phys_transport_version,
+#if defined(CONFIG_SCST_DEBUG) || defined(CONFIG_SCST_TRACING)
+ .default_trace_flags = SCST_LOCAL_DEFAULT_LOG_FLAGS,
+ .trace_flags = &trace_flag,
+#endif
+};
+
+static struct scsi_host_template scst_lcl_ini_driver_template = {
+ .name = SCST_LOCAL_NAME,
+ .queuecommand = scst_local_queuecommand,
+ .eh_abort_handler = scst_local_abort,
+ .eh_device_reset_handler = scst_local_device_reset,
+ .eh_target_reset_handler = scst_local_target_reset,
+ .can_queue = 256,
+ .this_id = -1,
+ .sg_tablesize = 0xFFFF,
+ .cmd_per_lun = 32,
+ .max_sectors = 0xffff,
+ /* Possible pass-through backend device may not support clustering */
+ .use_clustering = DISABLE_CLUSTERING,
+ .skip_settle_delay = 1,
+ .module = THIS_MODULE,
+};
+
+/*
+ * LLD Bus and functions
+ */
+
+static int scst_local_driver_probe(struct device *dev)
+{
+ int ret;
+ struct scst_local_sess *sess;
+ struct Scsi_Host *hpnt;
+
+ sess = to_scst_lcl_sess(dev);
+
+ TRACE_DBG("sess %p", sess);
+
+ hpnt = scsi_host_alloc(&scst_lcl_ini_driver_template, sizeof(*sess));
+ if (NULL == hpnt) {
+ PRINT_ERROR("%s", "scsi_register() failed");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ sess->shost = hpnt;
+
+ hpnt->max_id = 0; /* Don't want more than one id */
+ hpnt->max_lun = 0xFFFF;
+
+ /*
+ * Because of a change in the size of this field at 2.6.26
+ * we use this check ... it allows us to work on earlier
+ * kernels. If we don't, max_cmd_size gets set to 4 (and we get
+ * a compiler warning) so a scan never occurs.
+ */
+ hpnt->max_cmd_len = 260;
+
+ ret = scsi_add_host(hpnt, &sess->dev);
+ if (ret) {
+ PRINT_ERROR("%s", "scsi_add_host() failed");
+ ret = -ENODEV;
+ scsi_host_put(hpnt);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static int scst_local_driver_remove(struct device *dev)
+{
+ struct scst_local_sess *sess;
+
+ sess = to_scst_lcl_sess(dev);
+ if (!sess) {
+ PRINT_ERROR("%s", "Unable to locate sess info");
+ return -ENODEV;
+ }
+
+ scsi_remove_host(sess->shost);
+ scsi_host_put(sess->shost);
+ return 0;
+}
+
+static int scst_local_bus_match(struct device *dev,
+ struct device_driver *dev_driver)
+{
+ return 1;
+}
+
+static struct bus_type scst_local_lld_bus = {
+ .name = "scst_local_bus",
+ .match = scst_local_bus_match,
+ .probe = scst_local_driver_probe,
+ .remove = scst_local_driver_remove,
+};
+
+static struct device_driver scst_local_driver = {
+ .name = SCST_LOCAL_NAME,
+ .bus = &scst_local_lld_bus,
+};
+
+static struct device *scst_local_root;
+
+static void scst_local_release_adapter(struct device *dev)
+{
+ struct scst_local_sess *sess;
+
+ sess = to_scst_lcl_sess(dev);
+ if (sess == NULL)
+ goto out;
+
+ spin_lock(&sess->aen_lock);
+ sess->unregistering = 1;
+ scst_process_aens(sess, true);
+ spin_unlock(&sess->aen_lock);
+
+ cancel_work_sync(&sess->aen_work);
+
+ scst_unregister_session(sess->scst_sess, TRUE, NULL);
+
+ kfree(sess);
+
+out:
+ return;
+}
+
+static int __scst_local_add_adapter(struct scst_local_tgt *tgt,
+ const char *initiator_name, struct scst_local_sess **out_sess,
+ bool locked)
+{
+ int res;
+ struct scst_local_sess *sess;
+
+ sess = kzalloc(sizeof(*sess), GFP_KERNEL);
+ if (NULL == sess) {
+ PRINT_ERROR("Unable to alloc scst_lcl_host (size %zu)",
+ sizeof(*sess));
+ res = -ENOMEM;
+ goto out;
+ }
+
+ sess->tgt = tgt;
+ sess->number = atomic_inc_return(&scst_local_sess_num);
+ mutex_init(&sess->tr_id_mutex);
+
+ /*
+ * Init this stuff we need for scheduling AEN work
+ */
+ INIT_WORK(&sess->aen_work, scst_aen_work_fn);
+ spin_lock_init(&sess->aen_lock);
+ INIT_LIST_HEAD(&sess->aen_work_list);
+
+ sess->scst_sess = scst_register_session(tgt->scst_tgt, 0,
+ initiator_name, (void *)sess, NULL, NULL);
+ if (sess->scst_sess == NULL) {
+ PRINT_ERROR("%s", "scst_register_session failed");
+ kfree(sess);
+ res = -EFAULT;
+ goto out_free;
+ }
+
+ sess->dev.bus = &scst_local_lld_bus;
+ sess->dev.parent = scst_local_root;
+ sess->dev.release = &scst_local_release_adapter;
+ sess->dev.init_name = kobject_name(&sess->scst_sess->sess_kobj);
+
+ res = device_register(&sess->dev);
+ if (res != 0)
+ goto unregister_session;
+
+ res = sysfs_create_link(scst_sysfs_get_sess_kobj(sess->scst_sess),
+ &sess->shost->shost_dev.kobj, "host");
+ if (res != 0) {
+ PRINT_ERROR("Unable to create \"host\" link for target "
+ "%s", scst_get_tgt_name(tgt->scst_tgt));
+ goto unregister_dev;
+ }
+
+ if (!locked)
+ mutex_lock(&scst_local_mutex);
+ list_add_tail(&sess->sessions_list_entry, &tgt->sessions_list);
+ if (!locked)
+ mutex_unlock(&scst_local_mutex);
+
+ if (scst_initiator_has_luns(tgt->scst_tgt, initiator_name))
+ scsi_scan_target(&sess->shost->shost_gendev, 0, 0,
+ SCAN_WILD_CARD, 1);
+
+out:
+ return res;
+
+unregister_dev:
+ device_unregister(&sess->dev);
+
+unregister_session:
+ scst_unregister_session(sess->scst_sess, TRUE, NULL);
+
+out_free:
+ kfree(sess);
+ goto out;
+}
+
+static int scst_local_add_adapter(struct scst_local_tgt *tgt,
+ const char *initiator_name, struct scst_local_sess **out_sess)
+{
+ return __scst_local_add_adapter(tgt, initiator_name, out_sess, false);
+}
+
+/* Must be called under scst_local_mutex */
+static void scst_local_remove_adapter(struct scst_local_sess *sess)
+{
+
+ list_del(&sess->sessions_list_entry);
+
+ device_unregister(&sess->dev);
+ return;
+}
+
+static int scst_local_add_target(const char *target_name,
+ struct scst_local_tgt **out_tgt)
+{
+ int res;
+ struct scst_local_tgt *tgt;
+
+ tgt = kzalloc(sizeof(*tgt), GFP_KERNEL);
+ if (NULL == tgt) {
+ PRINT_ERROR("Unable to alloc tgt (size %zu)", sizeof(*tgt));
+ res = -ENOMEM;
+ goto out;
+ }
+
+ INIT_LIST_HEAD(&tgt->sessions_list);
+
+ tgt->scst_tgt = scst_register_target(&scst_local_targ_tmpl, target_name);
+ if (tgt->scst_tgt == NULL) {
+ PRINT_ERROR("%s", "scst_register_target() failed:");
+ res = -EFAULT;
+ goto out_free;
+ }
+
+ scst_tgt_set_tgt_priv(tgt->scst_tgt, tgt);
+
+ mutex_lock(&scst_local_mutex);
+ list_add_tail(&tgt->tgts_list_entry, &scst_local_tgts_list);
+ mutex_unlock(&scst_local_mutex);
+
+ if (out_tgt != NULL)
+ *out_tgt = tgt;
+
+ res = 0;
+
+out:
+ return res;
+
+out_free:
+ kfree(tgt);
+ goto out;
+}
+
+/* Must be called under scst_local_mutex */
+static void __scst_local_remove_target(struct scst_local_tgt *tgt)
+{
+ struct scst_local_sess *sess, *ts;
+
+ list_for_each_entry_safe(sess, ts, &tgt->sessions_list,
+ sessions_list_entry) {
+ scst_local_remove_adapter(sess);
+ }
+
+ list_del(&tgt->tgts_list_entry);
+
+ scst_unregister_target(tgt->scst_tgt);
+
+ kfree(tgt);
+ return;
+}
+
+static void scst_local_remove_target(struct scst_local_tgt *tgt)
+{
+
+ mutex_lock(&scst_local_mutex);
+ __scst_local_remove_target(tgt);
+ mutex_unlock(&scst_local_mutex);
+ return;
+}
+
+static int __init scst_local_init(void)
+{
+ int ret;
+ struct scst_local_tgt *tgt;
+
+ scst_local_root = root_device_register(SCST_LOCAL_NAME);
+ if (IS_ERR(scst_local_root)) {
+ ret = PTR_ERR(scst_local_root);
+ goto out;
+ }
+
+ ret = bus_register(&scst_local_lld_bus);
+ if (ret < 0) {
+ PRINT_ERROR("bus_register() error: %d", ret);
+ goto dev_unreg;
+ }
+
+ ret = driver_register(&scst_local_driver);
+ if (ret < 0) {
+ PRINT_ERROR("driver_register() error: %d", ret);
+ goto bus_unreg;
+ }
+
+ ret = scst_register_target_template(&scst_local_targ_tmpl);
+ if (ret != 0) {
+ PRINT_ERROR("Unable to register target template: %d", ret);
+ goto driver_unreg;
+ }
+
+ /*
+ * If we are using sysfs, then don't add a default target unless
+ * we are told to do so. When using procfs, we always add a default
+ * target because that was what the earliest versions did. Just
+ * remove the preprocessor directives when no longer needed.
+ */
+ if (!scst_local_add_default_tgt)
+ goto out;
+
+ ret = scst_local_add_target("scst_local_tgt", &tgt);
+ if (ret != 0)
+ goto tgt_templ_unreg;
+
+ ret = scst_local_add_adapter(tgt, "scst_local_host", NULL);
+ if (ret != 0)
+ goto tgt_unreg;
+
+out:
+ return ret;
+
+tgt_unreg:
+ scst_local_remove_target(tgt);
+
+tgt_templ_unreg:
+ scst_unregister_target_template(&scst_local_targ_tmpl);
+
+driver_unreg:
+ driver_unregister(&scst_local_driver);
+
+bus_unreg:
+ bus_unregister(&scst_local_lld_bus);
+
+dev_unreg:
+ root_device_unregister(scst_local_root);
+
+ goto out;
+}
+
+static void __exit scst_local_exit(void)
+{
+ struct scst_local_tgt *tgt, *tt;
+
+ down_write(&scst_local_exit_rwsem);
+
+ mutex_lock(&scst_local_mutex);
+ list_for_each_entry_safe(tgt, tt, &scst_local_tgts_list,
+ tgts_list_entry) {
+ __scst_local_remove_target(tgt);
+ }
+ mutex_unlock(&scst_local_mutex);
+
+ driver_unregister(&scst_local_driver);
+ bus_unregister(&scst_local_lld_bus);
+ root_device_unregister(scst_local_root);
+
+ /* Now unregister the target template */
+ scst_unregister_target_template(&scst_local_targ_tmpl);
+
+ /* To make lockdep happy */
+ up_write(&scst_local_exit_rwsem);
+ return;
+}
+
+device_initcall(scst_local_init);
+module_exit(scst_local_exit);
+
---
README.scst_local | 231 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 231 insertions(+)
diff -uprN orig/linux-2.6.35/Documentation/scst/README.scst_local linux-2.6.35/Documentation/scst/README.scst_local
--- orig/linux-2.6.35/Documentation/scst/README.scst_local
+++ linux-2.6.35/Documentation/scst/README.scst_local
@@ -0,0 +1,231 @@
+SCST Local ...
+Richard Sharpe, 30-Nov-2008
+
+This is the SCST Local driver. Its function is to allow you to access devices
+that are exported via SCST directly on the same Linux system that they are
+exported from.
+
+No assumptions are made in the code about the device types on the target, so
+any device handlers that you load in SCST should be visible, including tapes
+and so forth.
+
+You can freely use any sg, sd, st, etc. devices imported from target,
+except the following: you can't mount file systems or put swap on them.
+This is a limitation of Linux memory/cache manager. See SCST README file
+for details.
+
+To build, simply issue 'make' in the scst_local directory.
+
+Try 'modinfo scst_local' for a listing of module parameters so far.
+
+Here is how I have used it so far:
+
+1. Load up scst:
+
+ modprobe scst
+ modprobe scst_vdisk
+
+2. Create a virtual disk (or your own device handler):
+
+ dd if=/dev/zero of=/some/path/vdisk1.img bs=16384 count=1000000
+ echo "add_device vm_disk1 filename=/some/path/vdisk1.img" >/sys/kernel/scst_tgt/handlers/vdisk_fileio/mgmt
+
+3. Load the scst_local driver:
+
+ insmod scst_local add_default_tgt=1
+ echo "add vm_disk1 0" >/sys/kernel/scst_tgt/targets/scst_local/scst_local_tgt/luns/mgmt
+
+4. Check what you have
+
+ cat /proc/scsi/scsi
+ Attached devices:
+ Host: scsi0 Channel: 00 Id: 00 Lun: 00
+ Vendor: ATA Model: ST9320320AS Rev: 0303
+ Type: Direct-Access ANSI SCSI revision: 05
+ Host: scsi4 Channel: 00 Id: 00 Lun: 00
+ Vendor: TSSTcorp Model: CD/DVDW TS-L632D Rev: TO04
+ Type: CD-ROM ANSI SCSI revision: 05
+ Host: scsi7 Channel: 00 Id: 00 Lun: 00
+ Vendor: SCST_FIO Model: vm_disk1 Rev: 200
+ Type: Direct-Access ANSI SCSI revision: 04
+
+Or for (3) you can:
+
+ insmod scst_local
+ echo "add_target scst_local_tgt session_name=scst_local_host" >/sys/kernel/scst_tgt/targets/scst_local//mgmt
+ echo "add vm_disk1 0" >/sys/kernel/scst_tgt/targets/scst_local/scst_local_tgt/luns/mgmt
+
+Or instead of manually "add_device" in (2) and step (3) write a
+scstadmin config:
+
+HANDLER vdisk_fileio {
+ DEVICE vm_disk1 {
+ filename /some/path/vdisk1.img
+ }
+}
+
+TARGET_DRIVER scst_local {
+ TARGET scst_local_tgt {
+ session_name scst_local_host
+
+ LUN 0 vm_disk1
+ }
+}
+
+then:
+
+ insmod scst_local
+ scstadmin -config conf_file.cfg
+
+There can be any number of targets and sessions created. Each SCST
+session corresponds to SCSI host. You can change which LUNs assigned to
+each session by using SCST access control.
+
+5. Have fun.
+
+Some of this was coded while in Santa Clara, some in Bangalore, and some in
+Hyderabad. Noe doubt some will be coded on the way back to Santa Clara.
+
+The code still has bugs, so if you encounter any, email me the fixes at:
+
+ realrichardsharpe@...il.com
+
+I am thinking of renaming this to something more interesting.
+
+
+Sysfs interface
+===============
+
+See SCST's README for a common SCST sysfs description.
+
+Root of this driver is /sys/kernel/scst_tgt/targets/scst_local. It has
+the following additional entry:
+
+ - stats - read-only attribute with some statistical information.
+
+Each target subdirectory contains the following additional entries:
+
+ - phys_transport_version - contains and allows to change physical
+ transport version descriptor. It determines by which phisical
+ interface this target will look like. See SPC for more details. By
+ default, it is not defined (0).
+
+ - scsi_transport_version - contains and allows to change SCSI
+ transport version descriptor. It determines by which SCSI
+ transport this target will look like. See SPC for more details. By
+ default, it is SAS.
+
+Each session subdirectory contains the following additional entries:
+
+ - transport_id - contains this host's TransportID. This TransportID
+ used to identify initiator in Persisten Reservation commands. If you
+ change scsi_transport_version for a target, make sure you set for all
+ its sessions correct TransportID. See SPC for more details.
+
+ - host - links to the corresponding SCSI host. Using it you can find
+ local sg/bsg/sd/etc. devices of this session. For instance, this
+ links points out to host12, so you can find your sg devices by:
+
+$ lsscsi -g|grep "\[12:"
+[12:0:0:0] disk SCST_FIO rd1 200 /dev/sdc /dev/sg2
+[12:0:0:1] disk SCST_FIO nullio 200 /dev/sdd /dev/sg3
+
+They are /dev/sg2 and /dev/sg3.
+
+The following management commands available via /sys/kernel/scst_tgt/targets/scst_local/mgmt:
+
+ - add_target target_name [session_name=sess_name; [session_name=sess_name1;] [...]] -
+ creates a target with optionally one or more sessions.
+
+ - del_target target_name - deletes a target.
+
+ - add_session target_name session_name - adds to target target_name
+ session (SCSI host) with name session_name.
+
+ - del_session target_name session_name - deletes session session_name
+ from target target_name.
+
+
+Note on performance
+===================
+
+Although this driver implemented in the most performance effective way,
+including zero-copy passing data between SCSI/block subsystems and SCST,
+in many cases it is NOT suited to measure performance as a NULL link.
+For example, it is not suited for max IOPS measurements. This is because
+for such cases not performance of the link between the target and
+initiator is the bottleneck, but CPU or memory speed on the target or
+initiator. For scst_local you have both initiator and target on the same
+system, which means each your initiator and target are much less
+CPU/memory powerful.
+
+
+User space target drivers
+=========================
+
+Scst_local can be used to write full featured SCST target drivers in
+user space:
+
+1. For each SCSI target a user space target driver should create an
+ scst_local's target using "add_target" command.
+
+2. Then the user space target driver should, if needed, set its SCSI and
+ physical transport version descriptors using attributes
+ scsi_transport_version and phys_transport_version correspondingly in
+ /sys/kernel/scst_tgt/targets/scst_local/target_name directory.
+
+3. For incoming session (I_T nexus) from an initiator the user space
+ target driver should create scst_local's session using "add_session"
+ command.
+
+4. Then, if needed, the user space target driver should set TransportID
+ for this session (I_T nexus) using attribute
+ /sys/kernel/scst_tgt/targets/scst_local/target_name/sessions/session_name/transport_id
+
+5. Then the user space target driver should find out sg/bsg devices for
+ the LUNs the created session has using link
+ /sys/kernel/scst_tgt/targets/scst_local/target_name/sessions/session_name/host
+ as described above.
+
+6. Then the user space target driver can start serving the initiator using
+ found sg/bsg devices.
+
+For other connected initiators steps 3-6 should be repeated.
+
+
+Change log
+==========
+
+V0.1 24-Sep-2008 (Hyderabad) Initial coding, pretty chatty and messy,
+ but worked.
+
+V0.2 25-Sep-2008 (Hong Kong) Cleaned up the code a lot, reduced the log
+ chatter, fixed a bug where multiple LUNs did not
+ work. Also, added logging control. Tested with
+ five virtual disks. They all came up as /dev/sdb
+ through /dev/sdf and I could dd to them. Also
+ fixed a bug preventing multiple adapters.
+
+V0.3 26-Sep-2008 (Santa Clara) Added back a copyright plus cleaned up some
+ unused functions and structures.
+
+V0.4 5-Oct-2008 (Santa Clara) Changed name to scst_local as suggested, cleaned
+ up some unused variables (made them used) and
+ change allocation to a kmem_cache pool.
+
+V0.5 5-Oct-2008 (Santa Clara) Added mgmt commands to handle dev reset and
+ aborts. Not sure if aborts works. Also corrected
+ the version info and renamed readme to README.
+
+V0.6 7-Oct-2008 (Santa Clara) Removed some redundant code and made some
+ changes suggested by Vladislav.
+
+V0.7 11-Oct-2008 (Santa Clara) Moved into the scst tree. Cleaned up some
+ unused functions, used TRACE macros etc.
+
+V0.9 30-Nov-2008 (Mtn View) Cleaned up an additional problem with symbols not
+ being defined in older version of the kernel. Also
+ fixed some English and cleaned up this doc.
+
+V1.0 10-Sep-2010 (Moscow) Sysfs management added. Reviewed and cleaned up.
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists