| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201010032021.09265.jkrzyszt@tis.icnet.pl>
Date: Sun, 3 Oct 2010 20:21:07 +0200
From: Janusz Krzysztofik <jkrzyszt@....icnet.pl>
To: Richard Purdie <rpurdie@...ys.net>
Cc: "linux-fbdev@...r.kernel.org" <linux-fbdev@...r.kernel.org>,
linux-kernel@...r.kernel.org, e3-hacking@...th.li
Subject: [PATCH v2] LEDS: Add output invertion option to backlight trigger
This patch extends the LED backlight tirgger driver with an option that allows
for inverting the trigger output polarity.
Whith the invertion option provided, I (ab)use the backlight trigger for
driving a led that indicates LCD display blank condtition on my Amstrad Delta
videophone. Since the machine has no dedicated power LED, it was not possible
to distinguish if its display was blanked or it was turned off, without
touching it.
The invert sysfs control is modeled after a similiar function provided by the
gpio trigger driver.
Created and tested against linux-2.6.36-rc5 on Amstrad Delta.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@....icnet.pl>
---
v1 -> v2 changes:
- improve some conditional expressions to be more readable; thanks to Ralph
Corderoy (from e3-hacking) and Lars-Peter Clausen for their suggestions,
- refresh against linux-2.6.36-rc5.
drivers/leds/ledtrig-backlight.c | 60 ++++++++++++++++++++++++++++++++++++---
1 file changed, 56 insertions(+), 4 deletions(-)
diff -upr linux-2.6.36-rc5.orig/drivers/leds/ledtrig-backlight.c linux-2.6.36-rc5/drivers/leds/ledtrig-backlight.c
--- linux-2.6.36-rc5.orig/drivers/leds/ledtrig-backlight.c 2010-09-24 15:35:13.000000000 +0200
+++ linux-2.6.36-rc5/drivers/leds/ledtrig-backlight.c 2010-10-03 15:59:49.000000000 +0200
@@ -26,6 +26,7 @@ struct bl_trig_notifier {
int brightness;
int old_status;
struct notifier_block notifier;
+ unsigned invert;
};
static int fb_notifier_callback(struct notifier_block *p,
@@ -36,23 +37,63 @@ static int fb_notifier_callback(struct n
struct led_classdev *led = n->led;
struct fb_event *fb_event = data;
int *blank = fb_event->data;
+ int new_status = *blank ? BLANK : UNBLANK;
switch (event) {
case FB_EVENT_BLANK :
- if (*blank && n->old_status == UNBLANK) {
+ if (new_status == n->old_status)
+ break;
+
+ if ((n->old_status == UNBLANK) ^ n->invert) {
n->brightness = led->brightness;
led_set_brightness(led, LED_OFF);
- n->old_status = BLANK;
- } else if (!*blank && n->old_status == BLANK) {
+ } else {
led_set_brightness(led, n->brightness);
- n->old_status = UNBLANK;
}
+
+ n->old_status = new_status;
+
break;
}
return 0;
}
+static ssize_t bl_trig_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct bl_trig_notifier *n = led->trigger_data;
+
+ return sprintf(buf, "%s\n", n->invert ? "yes" : "no");
+}
+
+static ssize_t bl_trig_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t num)
+{
+ struct led_classdev *led = dev_get_drvdata(dev);
+ struct bl_trig_notifier *n = led->trigger_data;
+ unsigned invert;
+ int ret;
+
+ ret = sscanf(buf, "%u", &invert);
+ if (ret < 1) {
+ dev_err(dev, "invalid value\n");
+ return -EINVAL;
+ }
+
+ n->invert = !!invert;
+
+ /* After inverting, we need to update the LED. */
+ if ((n->old_status == BLANK) ^ n->invert)
+ led_set_brightness(led, LED_OFF);
+ else
+ led_set_brightness(led, n->brightness);
+
+ return num;
+}
+static DEVICE_ATTR(invert, 0644, bl_trig_invert_show, bl_trig_invert_store);
+
static void bl_trig_activate(struct led_classdev *led)
{
int ret;
@@ -66,6 +107,10 @@ static void bl_trig_activate(struct led_
return;
}
+ ret = device_create_file(led->dev, &dev_attr_invert);
+ if (ret)
+ goto err_invert;
+
n->led = led;
n->brightness = led->brightness;
n->old_status = UNBLANK;
@@ -74,6 +119,12 @@ static void bl_trig_activate(struct led_
ret = fb_register_client(&n->notifier);
if (ret)
dev_err(led->dev, "unable to register backlight trigger\n");
+
+ return;
+
+err_invert:
+ led->trigger_data = NULL;
+ kfree(n);
}
static void bl_trig_deactivate(struct led_classdev *led)
@@ -82,6 +133,7 @@ static void bl_trig_deactivate(struct le
(struct bl_trig_notifier *) led->trigger_data;
if (n) {
+ device_remove_file(led->dev, &dev_attr_invert);
fb_unregister_client(&n->notifier);
kfree(n);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists