[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20101008201008.GA2414@tuxdriver.com>
Date: Fri, 8 Oct 2010 16:10:09 -0400
From: "John W. Linville" <linville@...driver.com>
To: davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: pull request: wireless-next-2.6 2010-10-08
Dave,
Another week, another huge pull request for -next...
This offering is mostly the usual driver updates and such for ath9k,
iwlwifi, rt2x00, wl1271, and a few others. Also featured are a number
of mac80211, cfg80211 and nl80211 improvements from Johannes, as well
as some mac80211 scanning improvements from Stanislaw. Johannes is
also sneaking a genetlink feature through this tree, of which you
are already aware. :-)
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit dd53df265b1ee7a1fbbc76bb62c3bec2383bbd44:
bonding: add Speed/Duplex information to /proc/net/bonding/bond (2010-10-06 18:43:34 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git for-davem
Ben Greear (4):
wireless: Use first phyX name available when registering phy devices.
ath5k: Allow ath5k to support virtual STA and AP interfaces.
ath5k: Print rx/tx bytes in debugfs
ath9k: Report total tx/rx bytes and packets in debugfs.
Ben Hutchings (1):
ar9170: Remove MODULE_FIRMWARE references to two-stage firmware
Bill Jordan (3):
ath9k: add WDS interfaces to ath9k
cfg80211: patches to allow setting the WDS peer
mac80211: fix for WDS interfaces
Bruno Randolf (3):
mac80211: Add WME information element for IBSS
ath5k: Don't wake internal queues
nl80211/mac80211: Add retry and failed transmission count to station info
Christian Lamparter (3):
mac80211: fix rx monitor filter refcounters
carl9170: support firmware-based rx filter
p54usb: add five more USBIDs
Dan Carpenter (1):
ipw2200: check for allocation failures
Felix Fietkau (17):
ath9k_htc: remove use of common->ani.noise_floor
ath9k_hw: keep calibrated noise floor values per channel
ath9k: do not return default noise floor values via survey
ath9k: remove the noise floor value in the ani struct
nl80211: allow drivers to indicate whether the survey data channel is in use
ath9k: return survey data for all channels instead of just the current one
ath9k: fix channel flag / regd issues with multiple cards
ath9k_hw: remove some useless calibration data
ath9k_hw: fix regression in ANI listen time calculation
ath9k_hw: clean up calibration flags
ath9k_hw: merge codepaths that access the cycle counter registers
ath9k_hw: clean up register write buffering
ath9k_hw: add a helper function to check for the new ANI implementation
ath9k_hw: clean up ANI state handling
ath9k_hw: remove code duplication in phy error counter handling
ath9k_hw: remove function pointer abstraction for internal ANI ops
ath9k_hw: merge ath9k_hw_ani_monitor_old and ath9k_hw_ani_monitor_new
Gabor Juhos (1):
ath9k: get correct tx gain type in ath9k_hw_4k_get_eeprom
Helmut Schaa (18):
rt2x00: Don't overwrite beacon buffers in pairwise key setup
rt2x00: Split out parts of the rt2800_txdone function for easier reuse
rt2x00: rework tx status handling in rt2800pci
rt2x00: Fix SM PS check
rt2x00: Implement HT protection for rt2800
rt2x00: Don't initialize MM40 HT protection to RTS/CTS on PCI devices
rt2x00: Fix race between dma mapping and clearing rx entries in rt2800pci
rt2x00: Allow tx duplication for legacy rates in HT40 mode
rt2x00: Add register definition for busy time on secondary channel
rt2x00: add field definitions for the TBTT_SYNC_CFG register
rt2x00: Don't enable broad- and multicast buffering on USB devices
mac80211: distinct between max rates and the number of rates the hw can report
rt2x00: correctly set max_report_rates in rt61pci and rt2800
rt2x00: Enable rx aggregation in rt2800
rt2x00: Update comment about the AMPDU flag in the TXWI
rt2x00: Fix oops caused by error path in rt2x00lib_start
rt2x00: Improve cooperation between rt2800pci and minstrel
rt2x00: Work around hw aggregation oddity in rt2800
Ido Yariv (3):
wl1271: Handle large SPI transfers
wl1271: Support firmware RX packet aggregation
wl1271: Support firmware TX packet aggregation
Ivo van Doorn (2):
rt2x00: Add rt73usb device ID
rt2x00: Improve TX status entry validation
Jay Sternberg (1):
iwlwifi: define 100 devices
Johannes Berg (17):
cfg80211/mac80211: allow management frame TX in AP mode
cfg80211: remove spurious __KERNEL__ ifdef
cfg80211: fix locking
genetlink: introduce pre_doit/post_doit hooks
nl80211: use the new genetlink pre/post_doit hooks
nl80211: use generic check for netif_running
nl80211: reduce dumping boilerplate
mac80211: fix deadlock with multiple interfaces
nl80211: fix remain-on-channel documentation
mac80211: delete AddBA response timer
mac80211: avoid transmitting delBA to old AP
cfg80211/mac80211: allow per-station GTKs
nl80211: fix error in generic netif_running check
cfg80211: fix BSS double-unlinking
mac80211: fix sw scan locking
nl80211: use new genl helpers for WDS
cfg80211: constify WDS address
John W. Linville (9):
Merge branch 'wireless-next-2.6' of git://git.kernel.org/.../iwlwifi/iwlwifi-2.6
Merge branch 'wireless-next' of git://git.kernel.org/.../luca/wl12xx
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-2.6
mac80211: avoid uninitialized var warning in ieee80211_scan_cancel
Revert "rtl8180: use NAPI for bottom-half processing"
Revert "mac80211: use netif_receive_skb in ieee80211_tx_status callpath"
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-2.6
Merge branch 'wireless-next-2.6' of git://git.kernel.org/.../iwlwifi/iwlwifi-2.6
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next-2.6 into for-davem
Juuso Oikarinen (27):
wl1271: Implement CMD_SET_STA_STATE to indicate connection completion to FW
wl1271: Add trigger to net_device oper_state to change BT coex priority
wl1271: Fix scan race condition
wl1271: Change supported channel order for a more optimal scan
wl1271: Remove outdated FIXME's
wl1271: Move setting of wake-up conditions to ps.c from cmd.c
wl1271: Remove acx_fw_version function
wl1271: Release interrupt *after* releasing the driver context
wl1271: Remove function cmd_read_memory
wl1271: Enable/disable 11a support based on INI configuration
wl1271: Reduce rate used for last PSM entry attempt
wl1271: Enable 11a support always, prevent scanning for unsupporting chips
wl1271: Fix tid-configuration of TX frames
wl1271: Fix AC/TID default configuration
wl1271: Move scan complete invocation into work function
wl1271: Fix work cancelling when shutting down the driver
wl1271: Separate interface removal to another function
wl1271: Add hardware recovery mechanism
wl1271: Add handling for failing hardware scan command
wl1271: Optimize scan duration
wl1271: Increase connection reliability
wl1271: Add support for hardware GEM cipher
wl1271: Move work-init calls to hw allocation
wl1271: Indicate disconnection on hardware failure
wl1271: Add extended radio parameter initialization
mac80211: Add validity check for beacon_crc value
wl1271: Support FEM autodetection
Luciano Coelho (5):
wl1271: remove deprecated ACX definition
wl1271: remove useless 11a check when scanning
wl1271: fix forced passive scan
MAINTAINERS: Update git url for the wl1271 driver
wl1271: remove deprecated __attribute__ ((packed))
Luis R. Rodriguez (1):
mac80211: fix channel assumption for association done work
Mohammed Shafi Shajakhan (1):
ath9k : Fix for displaying the channel number
Ohad Ben-Cohen (1):
wl12xx: fix non-wl12xx build scenarios
Rafał Miłecki (3):
b43: N-PHY: simplify channel switching
b43: define B43_SHM_SH_CHAN_40MHZ
b43: N-PHY: don't duplicate setting channel in shared memory
Rajkumar Manoharan (1):
ath9k_hw: Fix hw reset failure with HTC driver
Senthil Balasubramanian (2):
ath9k: remove unnecessary power save flags.
ath9k: Introduce a wrapper for power save disable.
Shanyu Zhao (3):
iwlwifi: add iwl_nic_ops structure to iwl_ops
iwlagn: set CSR register for 6050g2 devices
iwlwifi: send DC calib config to runtime ucode
Stanislaw Gruszka (8):
iwlwifi: change WARN_ON to IWL_WARN in iwl_mac_add_interface
mac80211: perform scan cancel in hw reset work
mac80211: reduce number of __ieee80211_scan_completed calls
mac80211: keep lock when calling __ieee80211_scan_completed()
mac80211: assure we also cancel deferred scan request
mac80211: do not requeue scan work when not needed
mac80211: compete scan to cfg80211 if deferred scan fail to start
Revert "iwlwifi: do not perferm force reset while doing scan"
Wey-Yi Guy (9):
iwlagn: API v5 for 6050 series device
iwlwifi: schedule to deprecate software scan support
iwlagn: reduce redundant parameter definitions
iwlagn: rename iwl5000_tx_power_dbm_cmd
iwlwifi: remove uncorrect comments
iwlagn: rename iwl5000_tx_resp
iwlagn: define 130 series of WiFi/BT combo devices
iwlagn: fix module firmware name for 130 series device
iwlagn: add define for MODULE_FIRMWARE
ext Anand Gadiyar (1):
omap: zoom2/3: fix build caused by wl1271 support
Omnibus patch available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6-2010-10-08.patch.bz2
--
John W. Linville Someday the world will need a hero, and you
linville@...driver.com might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists