| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 10 Oct 2010 10:40:32 +0100 (BST)
From: Daniel Drake <dsd@...top.org>
To: x86@...nel.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH v2] OLPC: Add XO-1 poweroff support
Add a pm_power_off handler for the OLPC XO-1 laptop.
The driver can be built modular and follows the behaviour of the
APM driver, setting pm_power_off to NULL on unload. However, the
ability to unload the module will probably be removed (with a simple
__module_get(THIS_MODULE)) if/when XO-1 suspend/resume support is
added to this file at a later date.
Signed-off-by: Daniel Drake <dsd@...top.org>
---
arch/x86/Kconfig | 6 ++
arch/x86/kernel/Makefile | 1 +
arch/x86/kernel/olpc-xo1.c | 140 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 147 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/kernel/olpc-xo1.c
v2: can now be built modular, which will be more appropriate for distros
The plan is for arch/x86/kernel/olpc.c to register the platform device
when XO-1 is detected. A patch to add such machinery (for rfkill) is
still pending review. I plan to add probing of this new platform device
once the xo1-rfkill review is complete.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 065c188..08fa0d7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2017,6 +2017,12 @@ config OLPC
Add support for detecting the unique features of the OLPC
XO hardware.
+config OLPC_XO1
+ tristate "OLPC XO-1 support"
+ depends on OLPC
+ ---help---
+ Add support for non-essential features of the OLPC XO-1 laptop.
+
config OLPC_OPENFIRMWARE
bool "Support for OLPC's Open Firmware"
depends on !X86_64 && !X86_PAE
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index c0cc701..4983b61 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_SCx200) += scx200.o
scx200-y += scx200_32.o
obj-$(CONFIG_OLPC) += olpc.o
+obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o
obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o
obj-$(CONFIG_X86_MRST) += mrst.o
diff --git a/arch/x86/kernel/olpc-xo1.c b/arch/x86/kernel/olpc-xo1.c
new file mode 100644
index 0000000..f5442c0
--- /dev/null
+++ b/arch/x86/kernel/olpc-xo1.c
@@ -0,0 +1,140 @@
+/*
+ * Support for features of the OLPC XO-1 laptop
+ *
+ * Copyright (C) 2010 One Laptop per Child
+ * Copyright (C) 2006 Red Hat, Inc.
+ * Copyright (C) 2006 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <asm/io.h>
+#include <asm/olpc.h>
+
+#define DRV_NAME "olpc-xo1"
+
+#define PMS_BAR 4
+#define ACPI_BAR 5
+
+/* PMC registers (PMS block) */
+#define PM_SCLK 0x10
+#define PM_IN_SLPCTL 0x20
+#define PM_WKXD 0x34
+#define PM_WKD 0x30
+#define PM_SSC 0x54
+
+/* PM registers (ACPI block) */
+#define PM1_CNT 0x08
+#define PM_GPE0_STS 0x18
+
+static unsigned long acpi_base;
+static unsigned long pms_base;
+
+static void xo1_power_off(void)
+{
+ printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
+
+ /* Enable all of these controls with 0 delay */
+ outl(0x40000000, pms_base + PM_SCLK);
+ outl(0x40000000, pms_base + PM_IN_SLPCTL);
+ outl(0x40000000, pms_base + PM_WKXD);
+ outl(0x40000000, pms_base + PM_WKD);
+
+ /* Clear status bits (possibly unnecessary) */
+ outl(0x0002ffff, pms_base + PM_SSC);
+ outl(0xffffffff, acpi_base + PM_GPE0_STS);
+
+ /* Write SLP_EN bit to start the machinery */
+ outl(0x00002000, acpi_base + PM1_CNT);
+}
+
+/* Read the base addresses from the PCI BAR info */
+static int __devinit setup_bases(struct pci_dev *pdev)
+{
+ int r;
+
+ r = pci_enable_device_io(pdev);
+ if (r) {
+ dev_err(&pdev->dev, "can't enable device IO\n");
+ return r;
+ }
+
+ r = pci_request_region(pdev, ACPI_BAR, DRV_NAME);
+ if (r) {
+ dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", ACPI_BAR);
+ return r;
+ }
+
+ r = pci_request_region(pdev, PMS_BAR, DRV_NAME);
+ if (r) {
+ dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", PMS_BAR);
+ pci_release_region(pdev, ACPI_BAR);
+ return r;
+ }
+
+ acpi_base = pci_resource_start(pdev, ACPI_BAR);
+ pms_base = pci_resource_start(pdev, PMS_BAR);
+
+ return 0;
+}
+
+static int __devinit olpc_xo1_probe(struct platform_device *pdev)
+{
+ struct pci_dev *pcidev;
+ int r;
+
+ pcidev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+ NULL);
+ if (!pdev)
+ return -ENODEV;
+
+ r = setup_bases(pcidev);
+ if (r)
+ return r;
+
+ pm_power_off = xo1_power_off;
+
+ printk(KERN_INFO "OLPC XO-1 support registered\n");
+ return 0;
+}
+
+static int __devexit olpc_xo1_remove(struct platform_device *pdev)
+{
+ pm_power_off = NULL;
+ return 0;
+}
+
+static struct platform_driver olpc_xo1_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = olpc_xo1_probe,
+ .remove = __devexit_p(olpc_xo1_remove),
+};
+
+static int __init olpc_xo1_init(void)
+{
+ return platform_driver_register(&olpc_xo1_driver);
+}
+
+static void __exit olpc_xo1_exit(void)
+{
+ platform_driver_unregister(&olpc_xo1_driver);
+}
+
+MODULE_AUTHOR("Daniel Drake <dsd@...top.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:olpc-xo1");
+
+module_init(olpc_xo1_init);
+module_exit(olpc_xo1_exit);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists