Date:	Sun, 10 Oct 2010 16:29:25 +0200
From:	Tatyana Brokhman <tlinder@...eaurora.org>
To:	linux-usb@...r.kernel.org
Cc:	Tatyana Brokhman <tlinder@...eaurora.org>,
	David Brownell <dbrownell@...rs.sourceforge.net>,
	Greg Kroah-Hartman <gregkh@...e.de>,
	Alan Stern <stern@...land.harvard.edu>,
	linux-kernel@...r.kernel.org
Subject: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd

USB 3.0 hub includes 2 hubs - HS and SS ones.
Thus, when dummy_hcd enabled it will register 2 root hubs (SS and HS).

Signed-off-by: Tatyana Brokhman <tlinder@...eaurora.org>
---
 drivers/usb/gadget/dummy_hcd.c |  739 +++++++++++++++++++++++++++++++++-------
 1 files changed, 616 insertions(+), 123 deletions(-)

diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index dc65462..d680013 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 Alan Stern
+ * Copyright (C) 2010 Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -61,10 +62,13 @@
 
 #define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
 
-static const char	driver_name [] = "dummy_hcd";
-static const char	driver_desc [] = "USB Host+Gadget Emulator";
+static const char	driver_name[] = "dummy_hcd";
+static const char	ss_driver_name[] = "ss_dummy_hcd";
+static const char	driver_desc[] = "USB Host+Gadget Emulator";
+static const char	ss_driver_desc[] = "SS USB Host+Gadget Emulator";
 
-static const char	gadget_name [] = "dummy_udc";
+static const char	gadget_name[] = "dummy_udc";
+static const char	ss_gadget_name[] = "ss_dummy_udc";
 
 MODULE_DESCRIPTION (DRIVER_DESC);
 MODULE_AUTHOR ("David Brownell");
@@ -179,6 +183,8 @@ struct dummy {
 	u32				old_status;
 	unsigned			resuming:1;
 	unsigned long			re_timeout;
+	/* Address that will be given to the connected device */
+	int				devnum;
 
 	struct usb_device		*udev;
 	struct list_head		urbp_list;
@@ -220,6 +226,7 @@ static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
 }
 
 static struct dummy			*the_controller;
+static struct dummy			*the_ss_controller;
 
 /*-------------------------------------------------------------------------*/
 
@@ -259,10 +266,80 @@ stop_activity (struct dummy *dum)
 	/* driver now does any non-usb quiescing necessary */
 }
 
+
+/* caller must hold lock */
+static void
+set_ss_link_state(struct dummy *dum)
+{
+	dum->active = 0;
+	if ((dum->port_status & USB_SS_PORT_STAT_POWER) == 0)
+		dum->port_status = 0;
+
+	/* UDC suspend must cause a disconnect */
+	else if (!dum->pullup || dum->udc_suspended) {
+		dum->port_status &= ~(USB_PORT_STAT_CONNECTION |
+					USB_PORT_STAT_ENABLE);
+		if ((dum->old_status & USB_PORT_STAT_CONNECTION) != 0)
+			dum->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+	} else {
+		/* device is connected and not suspended */
+		dum->port_status |= (USB_PORT_STAT_CONNECTION |
+				     USB_PORT_STAT_SUPER_SPEED);
+		if ((dum->old_status & USB_PORT_STAT_CONNECTION) == 0)
+			dum->port_status |=
+				(USB_PORT_STAT_C_CONNECTION << 16);
+		if ((dum->port_status & USB_PORT_STAT_ENABLE) == 1 &&
+		    (dum->port_status & USB_SS_PORT_LS_U0) == 1 &&
+		    dum->rh_state != DUMMY_RH_SUSPENDED)
+			dum->active = 1;
+	}
+
+
+	if ((dum->port_status & USB_PORT_STAT_ENABLE) == 0 ||
+	    dum->active)
+		dum->resuming = 0;
+
+	/* if !connected or reset */
+	if ((dum->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
+			(dum->port_status & USB_PORT_STAT_RESET) != 0) {
+		/*
+		 * We're connected and not reseted (reset occured now),
+		 * and driver attached - disconnect!
+		 */
+		if ((dum->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
+		    (dum->old_status & USB_PORT_STAT_RESET) == 0 &&
+		    dum->driver) {
+			stop_activity(dum);
+			spin_unlock(&dum->lock);
+			dum->driver->disconnect(&dum->gadget);
+			spin_lock(&dum->lock);
+		}
+	} else if (dum->active != dum->old_active) {
+		if (dum->old_active && dum->driver->suspend) {
+			spin_unlock(&dum->lock);
+			dum->driver->suspend(&dum->gadget);
+			spin_lock(&dum->lock);
+		} else if (!dum->old_active &&
+			   dum->driver->resume) {
+			spin_unlock(&dum->lock);
+			dum->driver->resume(&dum->gadget);
+			spin_lock(&dum->lock);
+		}
+	}
+
+	dum->old_status = dum->port_status;
+	dum->old_active = dum->active;
+}
+
 /* caller must hold lock */
 static void
 set_link_state (struct dummy *dum)
 {
+	if (dum == the_ss_controller) {
+		set_ss_link_state(dum);
+		return;
+	}
 	dum->active = 0;
 	if ((dum->port_status & USB_PORT_STAT_POWER) == 0)
 		dum->port_status = 0;
@@ -343,7 +420,13 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	dum = ep_to_dummy (ep);
 	if (!dum->driver || !is_enabled (dum))
 		return -ESHUTDOWN;
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x3ff;
+	max = le16_to_cpu(desc->wMaxPacketSize) ;
+	/*
+	 * For HS/FS devices only bits 0..9 of the wMaxPacketSize represent the
+	 * maximum packet size
+	 */
+	if (dum->gadget.speed < USB_SPEED_SUPER)
+		max &= 0x3ff;
 
 	/* drivers must not request bad settings, since lower levels
 	 * (hardware or its drivers) may not check.  some endpoints
@@ -361,6 +444,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			goto done;
 		}
 		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
+			if (max == 1024)
+				break;
+			goto done;
 		case USB_SPEED_HIGH:
 			if (max == 512)
 				break;
@@ -379,6 +466,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			goto done;
 		/* real hardware might not handle all packet sizes */
 		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
 			if (max <= 1024)
 				break;
@@ -399,6 +487,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			goto done;
 		/* real hardware might not handle all packet sizes */
 		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
 			if (max <= 1024)
 				break;
@@ -710,11 +799,19 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value)
 	return 0;
 }
 
+void dummy_get_config_params(struct usb_dcd_config_params *params)
+{
+	/* Just for testing so return maximum values */
+	params->bU1devExitLat = 0x0a;
+	params->bU2DevExitLat = 0x7ff;
+}
+
 static const struct usb_gadget_ops dummy_ops = {
 	.get_frame	= dummy_g_get_frame,
 	.wakeup		= dummy_wakeup,
 	.set_selfpowered = dummy_set_selfpowered,
 	.pullup		= dummy_pullup,
+	.get_config_params = dummy_get_config_params
 };
 
 /*-------------------------------------------------------------------------*/
@@ -750,16 +847,24 @@ static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
 int
 usb_gadget_register_driver (struct usb_gadget_driver *driver)
 {
-	struct dummy	*dum = the_controller;
+	struct dummy	*dum;
 	int		retval, i;
+	enum usb_device_speed	speed = USB_SPEED_UNKNOWN;
+
+	if (!driver->bind || !driver->setup
+			|| driver->speed == USB_SPEED_UNKNOWN)
+		return -EINVAL;
+
+	speed = driver->speed;
+	if (driver->speed == USB_SPEED_SUPER)
+		dum = the_ss_controller;
+	else
+		dum = the_controller;
 
 	if (!dum)
 		return -EINVAL;
 	if (dum->driver)
 		return -EBUSY;
-	if (!driver->bind || !driver->setup
-			|| driver->speed == USB_SPEED_UNKNOWN)
-		return -EINVAL;
 
 	/*
 	 * SLAVE side init ... the layer above hardware, which
@@ -787,7 +892,6 @@ usb_gadget_register_driver (struct usb_gadget_driver *driver)
 	}
 
 	dum->gadget.ep0 = &dum->ep [0].ep;
-	dum->ep [0].ep.maxpacket = 64;
 	list_del_init (&dum->ep [0].ep.ep_list);
 	INIT_LIST_HEAD(&dum->fifo_req.queue);
 
@@ -806,6 +910,11 @@ usb_gadget_register_driver (struct usb_gadget_driver *driver)
 	/* khubd will enumerate this in a while */
 	spin_lock_irq (&dum->lock);
 	dum->pullup = 1;
+	dum->gadget.speed = speed;
+	if (speed == USB_SPEED_SUPER)
+		dum->ep[0].ep.maxpacket = 9;
+	else
+		dum->ep[0].ep.maxpacket = 64;
 	set_link_state (dum);
 	spin_unlock_irq (&dum->lock);
 
@@ -817,12 +926,20 @@ EXPORT_SYMBOL (usb_gadget_register_driver);
 int
 usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 {
-	struct dummy	*dum = the_controller;
+	struct dummy	*dum ;
 	unsigned long	flags;
 
+	if (!driver || !driver->unbind)
+		return -EINVAL;
+
+	if (driver->speed == USB_SPEED_SUPER)
+		dum = the_ss_controller;
+	else
+		dum = the_controller;
+
 	if (!dum)
 		return -ENODEV;
-	if (!driver || driver != dum->driver || !driver->unbind)
+	if (driver != dum->driver)
 		return -EINVAL;
 
 	dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n",
@@ -897,6 +1014,34 @@ static int dummy_udc_probe (struct platform_device *pdev)
 	return rc;
 }
 
+static int dummy_ss_udc_probe(struct platform_device *pdev)
+{
+	struct dummy	*dum = the_ss_controller;
+	int		rc;
+
+	dum->gadget.name = gadget_name;
+	dum->gadget.ops = &dummy_ops;
+	dum->gadget.is_dualspeed = 1;
+
+	/* maybe claim OTG support, though we won't complete HNP */
+	dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0);
+
+	dev_set_name(&dum->gadget.dev, "ss_gadget");
+	dum->gadget.dev.parent = &pdev->dev;
+	dum->gadget.dev.release = dummy_gadget_release;
+	rc = device_register(&dum->gadget.dev);
+	if (rc < 0)
+		return rc;
+
+	usb_get_hcd(dummy_to_hcd(dum));
+
+	platform_set_drvdata(pdev, dum);
+	rc = device_create_file(&dum->gadget.dev, &dev_attr_function);
+	if (rc < 0)
+		device_unregister(&dum->gadget.dev);
+	return rc;
+}
+
 static int dummy_udc_remove (struct platform_device *pdev)
 {
 	struct dummy	*dum = platform_get_drvdata (pdev);
@@ -946,6 +1091,17 @@ static struct platform_driver dummy_udc_driver = {
 	},
 };
 
+static struct platform_driver dummy_ss_udc_driver = {
+	.probe		= dummy_ss_udc_probe,
+	.remove		= dummy_udc_remove,
+	.suspend	= dummy_udc_suspend,
+	.resume		= dummy_udc_resume,
+	.driver		= {
+		.name	= (char *) ss_gadget_name,
+		.owner	= THIS_MODULE,
+	},
+};
+
 /*-------------------------------------------------------------------------*/
 
 /* MASTER/HOST SIDE DRIVER
@@ -1195,6 +1351,173 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
 #define Ep_Request	(USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
 #define Ep_InRequest	(Ep_Request | USB_DIR_IN)
 
+
+/**
+ * This function handles all control transferes
+ *
+ * @param dum - pointer to dummy (the_controller)
+ * @param urb - the urb request to handle
+ * @param status - pointer to request handling status
+ * @param master - pointer to the dummy master this request was
+ *		 received for
+ */
+static int handle_control_request(struct dummy *dum, struct urb *urb,
+				  int *status)
+{
+	struct usb_ctrlrequest setup;
+	struct dummy_ep		*ep2;
+	int			ret_val = 1;
+	unsigned	w_index;
+	unsigned	w_value;
+
+	setup = *(struct usb_ctrlrequest *) urb->setup_packet;
+	w_index = le16_to_cpu(setup.wIndex);
+	w_value = le16_to_cpu(setup.wValue);
+	switch (setup.bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (setup.bRequestType != Dev_Request)
+			break;
+		dum->address = w_value;
+		*status = 0;
+		dev_dbg(udc_dev(dum), "set_address = %d\n",
+				w_value);
+		ret_val = 0;
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (setup.bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				dum->gadget.b_hnp_enable = 1;
+				break;
+			case USB_DEVICE_A_HNP_SUPPORT:
+				dum->gadget.a_hnp_support = 1;
+				break;
+			case USB_DEVICE_A_ALT_HNP_SUPPORT:
+				dum->gadget.a_alt_hnp_support = 1;
+				break;
+			case USB_DEVICE_U1_ENABLE:
+				if (dum->gadget.speed == USB_SPEED_SUPER)
+					w_value = USB_DEV_STAT_U1_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_U2_ENABLE:
+				if (dum->gadget.speed == USB_SPEED_SUPER)
+					w_value = USB_DEV_STAT_U2_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_LTM_ENABLE:
+				if (dum->gadget.speed == USB_SPEED_SUPER)
+					w_value = USB_DEV_STAT_LTM_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+			}
+			if (ret_val == 0) {
+				dum->devstatus |= (1 << w_value);
+				*status = 0;
+			}
+		} else if (setup.bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2 || ep2->ep.name == ep0name) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			ep2->halted = 1;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		if (setup.bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				w_value = USB_DEVICE_REMOTE_WAKEUP;
+				break;
+			case USB_DEVICE_U1_ENABLE:
+				if (dum->gadget.speed == USB_SPEED_SUPER)
+					w_value = USB_DEV_STAT_U1_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_U2_ENABLE:
+				if (dum->gadget.speed == USB_SPEED_SUPER)
+					w_value = USB_DEV_STAT_U2_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_LTM_ENABLE:
+				if (dum->gadget.speed == USB_SPEED_SUPER)
+					w_value = USB_DEV_STAT_LTM_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (ret_val == 0) {
+				dum->devstatus &= ~(1 << w_value);
+				*status = 0;
+			}
+		} else if (setup.bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (!ep2->wedged)
+				ep2->halted = 0;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if (setup.bRequestType == Dev_InRequest
+				|| setup.bRequestType == Intf_InRequest
+				|| setup.bRequestType == Ep_InRequest) {
+			char *buf;
+			/*
+			 * device: remote wakeup, selfpowered
+			 * interface: nothing
+			 * endpoint: halt
+			 */
+			buf = (char *)urb->transfer_buffer;
+			if (urb->transfer_buffer_length > 0) {
+				if (setup.bRequestType == Ep_InRequest) {
+					ep2 = find_endpoint(dum, w_index);
+					if (!ep2) {
+						ret_val = -EOPNOTSUPP;
+						break;
+					}
+					buf[0] = ep2->halted;
+				} else if (setup.bRequestType ==
+					   Dev_InRequest) {
+					buf[0] = (u8)dum->devstatus;
+				} else
+					buf[0] = 0;
+			}
+			if (urb->transfer_buffer_length > 1)
+				buf[1] = 0;
+			urb->actual_length = min_t(u32, 2,
+				urb->transfer_buffer_length);
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	}
+	return ret_val;
+}
+
 /* drive both sides of the transfers; looks like irq handlers to
  * both drivers except the callbacks aren't in_irq().
  */
@@ -1217,6 +1540,9 @@ static void dummy_timer (unsigned long _dum)
 	case USB_SPEED_HIGH:
 		total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
 		break;
+	case USB_SPEED_SUPER:
+		total = 1024/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
+		break;
 	default:
 		dev_err (dummy_dev(dum), "bogus device speed\n");
 		return;
@@ -1326,117 +1652,8 @@ restart:
 			ep->last_io = jiffies;
 			ep->setup_stage = 0;
 			ep->halted = 0;
-			switch (setup.bRequest) {
-			case USB_REQ_SET_ADDRESS:
-				if (setup.bRequestType != Dev_Request)
-					break;
-				dum->address = w_value;
-				status = 0;
-				dev_dbg (udc_dev(dum), "set_address = %d\n",
-						w_value);
-				value = 0;
-				break;
-			case USB_REQ_SET_FEATURE:
-				if (setup.bRequestType == Dev_Request) {
-					value = 0;
-					switch (w_value) {
-					case USB_DEVICE_REMOTE_WAKEUP:
-						break;
-					case USB_DEVICE_B_HNP_ENABLE:
-						dum->gadget.b_hnp_enable = 1;
-						break;
-					case USB_DEVICE_A_HNP_SUPPORT:
-						dum->gadget.a_hnp_support = 1;
-						break;
-					case USB_DEVICE_A_ALT_HNP_SUPPORT:
-						dum->gadget.a_alt_hnp_support
-							= 1;
-						break;
-					default:
-						value = -EOPNOTSUPP;
-					}
-					if (value == 0) {
-						dum->devstatus |=
-							(1 << w_value);
-						status = 0;
-					}
 
-				} else if (setup.bRequestType == Ep_Request) {
-					// endpoint halt
-					ep2 = find_endpoint (dum, w_index);
-					if (!ep2 || ep2->ep.name == ep0name) {
-						value = -EOPNOTSUPP;
-						break;
-					}
-					ep2->halted = 1;
-					value = 0;
-					status = 0;
-				}
-				break;
-			case USB_REQ_CLEAR_FEATURE:
-				if (setup.bRequestType == Dev_Request) {
-					switch (w_value) {
-					case USB_DEVICE_REMOTE_WAKEUP:
-						dum->devstatus &= ~(1 <<
-							USB_DEVICE_REMOTE_WAKEUP);
-						value = 0;
-						status = 0;
-						break;
-					default:
-						value = -EOPNOTSUPP;
-						break;
-					}
-				} else if (setup.bRequestType == Ep_Request) {
-					// endpoint halt
-					ep2 = find_endpoint (dum, w_index);
-					if (!ep2) {
-						value = -EOPNOTSUPP;
-						break;
-					}
-					if (!ep2->wedged)
-						ep2->halted = 0;
-					value = 0;
-					status = 0;
-				}
-				break;
-			case USB_REQ_GET_STATUS:
-				if (setup.bRequestType == Dev_InRequest
-						|| setup.bRequestType
-							== Intf_InRequest
-						|| setup.bRequestType
-							== Ep_InRequest
-						) {
-					char *buf;
-
-					// device: remote wakeup, selfpowered
-					// interface: nothing
-					// endpoint: halt
-					buf = (char *)urb->transfer_buffer;
-					if (urb->transfer_buffer_length > 0) {
-						if (setup.bRequestType ==
-								Ep_InRequest) {
-	ep2 = find_endpoint (dum, w_index);
-	if (!ep2) {
-		value = -EOPNOTSUPP;
-		break;
-	}
-	buf [0] = ep2->halted;
-						} else if (setup.bRequestType ==
-								Dev_InRequest) {
-							buf [0] = (u8)
-								dum->devstatus;
-						} else
-							buf [0] = 0;
-					}
-					if (urb->transfer_buffer_length > 1)
-						buf [1] = 0;
-					urb->actual_length = min_t(u32, 2,
-						urb->transfer_buffer_length);
-					value = 0;
-					status = 0;
-				}
-				break;
-			}
+			value = handle_control_request(dum, urb, &status);
 
 			/* gadget driver handles all other requests.  block
 			 * until setup() returns; no reentrancy issues etc.
@@ -1576,7 +1793,141 @@ hub_descriptor (struct usb_hub_descriptor *desc)
 	desc->bitmap [1] = 0xff;
 }
 
-static int dummy_hub_control (
+/**
+ * This function handles the control requests of the dummy (ss
+ * hub) master. All control requests that are part of the
+ * enumeration are handled by the dummy_timer
+ * Note: this function is used only for the SS root hub
+ *
+ * @return int
+ */
+static int dummy_ss_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct dummy		*dum;
+	int		retval = 0;
+	unsigned long	flags;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return -ETIMEDOUT;
+
+	dum = hcd_to_dummy(hcd);
+	spin_lock_irqsave(&dum->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		break;
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			if (dum->port_status & USB_SS_PORT_STAT_POWER)
+				dev_dbg(dummy_dev(dum), "power-off\n");
+			/* FALLS THROUGH */
+		default:
+			dum->port_status &= ~(1 << wValue);
+			set_link_state(dum);
+		}
+		break;
+	case GetHubDescriptor:
+		hub_descriptor((struct usb_hub_descriptor *) buf);
+		break;
+	case GetHubStatus:
+		/* We report that no change occured in the hub status
+		 * (power and overcurent conditions)
+		 */
+		*(__le32 *) buf = cpu_to_le32 (0);
+		break;
+	case GetPortStatus:
+		/* We have only one port */
+		if (wIndex != 1)
+			retval = -EPIPE;
+
+		/* whoever resets or resumes must GetPortStatus to
+		 * complete it!!
+		 */
+		/* TODO: add support for suspend/resume */
+		if ((dum->port_status & USB_PORT_STAT_RESET) != 0 &&
+			time_after_eq(jiffies, dum->re_timeout)) {
+			dum->port_status |= (USB_PORT_STAT_C_RESET << 16);
+			dum->port_status &= ~USB_PORT_STAT_RESET;
+		}
+		if (dum->pullup)
+			dum->port_status |= USB_PORT_STAT_ENABLE;
+
+		set_link_state(dum);
+
+		((__le16 *) buf)[0] = cpu_to_le16 (dum->port_status);
+		((__le16 *) buf)[1] = cpu_to_le16 (dum->port_status >> 16);
+		break;
+	case SetHubFeature:
+		retval = -EPIPE;
+		break;
+	case SetPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_LINK_STATE:
+			/* Since this is dummy we don't have an actual link so
+			 * there is nothing to do for the SET_LINK_STATE cmd
+			 */
+			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			/* TODO: add suspend/resume support! */
+			break;
+		case USB_PORT_FEAT_POWER:
+			dum->port_status |= USB_SS_PORT_STAT_POWER;
+			set_link_state(dum);
+			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+		case USB_PORT_FEAT_RESET:
+			/* if it's already enabled, disable */
+			dum->port_status = 0;
+			dum->port_status = (USB_SS_PORT_STAT_POWER |
+					       USB_PORT_STAT_CONNECTION |
+					       USB_PORT_STAT_RESET);
+			/* We want to reset device status. All but the
+			 * Self powered feature
+			 */
+			dum->devstatus &= 0x0000 |
+				(1 << USB_DEVICE_SELF_POWERED);
+			/* FIXME: what is the correct reset signaling interval?
+			 * Is it still 50msec as for HS?
+			 */
+			dum->re_timeout = jiffies + msecs_to_jiffies(50);
+			/* FALLS THROUGH */
+		default:
+			if ((dum->port_status &
+			     USB_SS_PORT_STAT_POWER) != 0) {
+				dum->port_status |= (1 << wValue);
+				set_link_state(dum);
+			}
+		}
+		break;
+	case GetPortErrorCount:
+		/* We'll always return 0 since this is a dummy hub */
+		*(__le32 *) buf = cpu_to_le32 (0);
+		break;
+	case SetHubDepth:
+		break;
+	default:
+		dev_dbg(dummy_dev(dum),
+			"hub control req%04x v%04x i%04x l%d\n",
+			typeReq, wValue, wIndex, wLength);
+
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&dum->lock, flags);
+
+	if ((dum->port_status & PORT_C_MASK) != 0)
+		usb_hcd_poll_rh_status(hcd);
+	return retval;
+}
+
+static int dummy_hub_control(
 	struct usb_hcd	*hcd,
 	u16		typeReq,
 	u16		wValue,
@@ -1690,7 +2041,11 @@ static int dummy_hub_control (
 			dum->port_status &= ~(USB_PORT_STAT_ENABLE
 					| USB_PORT_STAT_LOW_SPEED
 					| USB_PORT_STAT_HIGH_SPEED);
-			dum->devstatus = 0;
+			/*
+			 * We want to reset device status. All but the
+			 * Self powered feature
+			 */
+			dum->devstatus &= (1 << USB_DEVICE_SELF_POWERED);
 			/* 50msec reset signaling */
 			dum->re_timeout = jiffies + msecs_to_jiffies(50);
 			/* FALLS THROUGH */
@@ -1852,6 +2207,32 @@ static int dummy_h_get_frame (struct usb_hcd *hcd)
 	return dummy_g_get_frame (NULL);
 }
 
+/**
+ * Issue an Address Device command (which will issue a SetAddress request to
+ * the device).
+ * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
+ * we should only issue and wait on one address command at the same time.
+ *
+ * The device address comes from the struct dum_master_data
+ * field of the the_controller. It can be either ss_master or
+ * master, so this function is used both for SS and HS/FS hcd
+ * driver
+ *
+ * @param hcd - host controller of the device
+ * @param udev - device to address
+ *
+ * @return int - 0 on sucsess, or an error code (refere to
+ *	   errno-base.h for details)
+ */
+static int dummy_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct dummy *dum = hcd_to_dummy(hcd);
+	udev->devnum = dum->devnum ;
+	return usb_control_msg(udev, (PIPE_CONTROL << 30),
+		USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
+		NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
 static const struct hc_driver dummy_hcd = {
 	.description =		(char *) driver_name,
 	.product_desc =		"Dummy host controller",
@@ -1864,6 +2245,7 @@ static const struct hc_driver dummy_hcd = {
 
 	.urb_enqueue = 		dummy_urb_enqueue,
 	.urb_dequeue = 		dummy_urb_dequeue,
+	.address_device =	dummy_address_device,
 
 	.get_frame_number = 	dummy_h_get_frame,
 
@@ -1873,6 +2255,28 @@ static const struct hc_driver dummy_hcd = {
 	.bus_resume =		dummy_bus_resume,
 };
 
+static const struct hc_driver dummy_ss_hcd = {
+	.description =		(char *) ss_driver_name,
+	.product_desc =		"Dummy SS host controller",
+	.hcd_priv_size =	sizeof(struct dummy),
+
+	.flags =		HCD_USB3,
+
+	.start =		dummy_start,
+	.stop =			dummy_stop,
+
+	.urb_enqueue =		dummy_urb_enqueue,
+	.urb_dequeue =		dummy_urb_dequeue,
+	.address_device =	dummy_address_device,
+
+	.get_frame_number =	dummy_h_get_frame,
+
+	.hub_status_data =	dummy_hub_status,
+	.hub_control =		dummy_ss_hub_control,
+	.bus_suspend =		dummy_bus_suspend,
+	.bus_resume =		dummy_bus_resume,
+};
+
 static int dummy_hcd_probe(struct platform_device *pdev)
 {
 	struct usb_hcd		*hcd;
@@ -1890,6 +2294,28 @@ static int dummy_hcd_probe(struct platform_device *pdev)
 		usb_put_hcd (hcd);
 		the_controller = NULL;
 	}
+	the_controller->devnum = 2;
+	return retval;
+}
+
+static int dummy_hcd_probe_ss(struct platform_device *pdev)
+{
+	struct usb_hcd		*hcd;
+	int			retval;
+
+	dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", ss_driver_desc);
+
+	hcd = usb_create_hcd(&dummy_ss_hcd, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+	the_ss_controller = hcd_to_dummy(hcd);
+
+	retval = usb_add_hcd(hcd, 0, 0);
+	if (retval != 0) {
+		usb_put_hcd(hcd);
+		the_ss_controller = NULL;
+	}
+	the_ss_controller->devnum = 3;
 	return retval;
 }
 
@@ -1904,6 +2330,17 @@ static int dummy_hcd_remove (struct platform_device *pdev)
 	return 0;
 }
 
+static int dummy_ss_hcd_remove(struct platform_device *pdev)
+{
+	struct usb_hcd		*hcd;
+
+	hcd = platform_get_drvdata(pdev);
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+	the_ss_controller = NULL;
+	return 0;
+}
+
 static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state)
 {
 	struct usb_hcd		*hcd;
@@ -1945,10 +2382,23 @@ static struct platform_driver dummy_hcd_driver = {
 	},
 };
 
+static struct platform_driver dummy_ss_hcd_driver = {
+	.probe		= dummy_hcd_probe_ss,
+	.remove		= dummy_ss_hcd_remove,
+	.suspend	= dummy_hcd_suspend,
+	.resume		= dummy_hcd_resume,
+	.driver		= {
+		.name	= (char *) ss_driver_name,
+		.owner	= THIS_MODULE,
+	},
+};
+
 /*-------------------------------------------------------------------------*/
 
 static struct platform_device *the_udc_pdev;
+static struct platform_device *the_ss_udc_pdev;
 static struct platform_device *the_hcd_pdev;
+static struct platform_device *the_ss_hcd_pdev;
 
 static int __init init (void)
 {
@@ -1960,34 +2410,73 @@ static int __init init (void)
 	the_hcd_pdev = platform_device_alloc(driver_name, -1);
 	if (!the_hcd_pdev)
 		return retval;
+
+	the_ss_hcd_pdev = platform_device_alloc(ss_driver_name, -1);
+	if (!the_ss_hcd_pdev)
+		goto err_alloc_ss_hcd;
+
 	the_udc_pdev = platform_device_alloc(gadget_name, -1);
 	if (!the_udc_pdev)
 		goto err_alloc_udc;
 
+	the_ss_udc_pdev = platform_device_alloc(ss_gadget_name, -1);
+	if (!the_ss_udc_pdev)
+		goto err_alloc_ss_udc;
+
 	retval = platform_driver_register(&dummy_hcd_driver);
 	if (retval < 0)
 		goto err_register_hcd_driver;
+
+	retval = platform_driver_register(&dummy_ss_hcd_driver);
+	if (retval < 0)
+		goto err_register_ss_hcd_driver;
+
 	retval = platform_driver_register(&dummy_udc_driver);
 	if (retval < 0)
 		goto err_register_udc_driver;
 
+	retval = platform_driver_register(&dummy_ss_udc_driver);
+	if (retval < 0)
+		goto err_register_ss_udc_driver;
+
 	retval = platform_device_add(the_hcd_pdev);
 	if (retval < 0)
 		goto err_add_hcd;
+
+	retval = platform_device_add(the_ss_hcd_pdev);
+	if (retval < 0)
+		goto err_add_ss_hcd;
+
 	retval = platform_device_add(the_udc_pdev);
 	if (retval < 0)
 		goto err_add_udc;
+
+	retval = platform_device_add(the_ss_udc_pdev);
+	if (retval < 0)
+		goto err_add_ss_udc;
 	return retval;
 
+err_add_ss_udc:
+	platform_device_unregister(the_udc_pdev);
 err_add_udc:
+	platform_device_del(the_ss_hcd_pdev);
+err_add_ss_hcd:
 	platform_device_del(the_hcd_pdev);
 err_add_hcd:
+	platform_driver_unregister(&dummy_ss_udc_driver);
+err_register_ss_udc_driver:
 	platform_driver_unregister(&dummy_udc_driver);
 err_register_udc_driver:
+	platform_driver_unregister(&dummy_ss_hcd_driver);
+err_register_ss_hcd_driver:
 	platform_driver_unregister(&dummy_hcd_driver);
 err_register_hcd_driver:
+	platform_device_put(the_ss_udc_pdev);
+err_alloc_ss_udc:
 	platform_device_put(the_udc_pdev);
 err_alloc_udc:
+	platform_device_put(the_ss_hcd_pdev);
+err_alloc_ss_hcd:
 	platform_device_put(the_hcd_pdev);
 	return retval;
 }
@@ -1996,8 +2485,12 @@ module_init (init);
 static void __exit cleanup (void)
 {
 	platform_device_unregister(the_udc_pdev);
+	platform_device_unregister(the_ss_udc_pdev);
 	platform_device_unregister(the_hcd_pdev);
+	platform_device_unregister(the_ss_hcd_pdev);
 	platform_driver_unregister(&dummy_udc_driver);
+	platform_driver_unregister(&dummy_ss_udc_driver);
 	platform_driver_unregister(&dummy_hcd_driver);
+	platform_driver_unregister(&dummy_ss_hcd_driver);
 }
 module_exit (cleanup);
-- 
1.6.3.3

--
Sent by	an consultant of the Qualcomm Inovation Center, Inc.
The Qualcomm Inovation Center, Inc.is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists