| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1287049260-11988-5-git-send-email-marek.belisko@gmail.com>
Date: Thu, 14 Oct 2010 11:40:59 +0200
From: Marek Belisko <marek.belisko@...il.com>
To: Greg Kroah-Hartman <gregkh@...e.de>,
Marek Belisko <marek.belisko@...il.com>,
Arnd Bergmann <arnd@...db.de>, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org
Cc: Marek Belisko <marek.belisko@...il.com>
Subject: [PATCH 4/5] staging:ft1000: correct indentations for ft1000_usb.c file.
Signed-off-by: Marek Belisko <marek.belisko@...il.com>
---
drivers/staging/ft1000/ft1000-usb/ft1000_usb.c | 165 +++++++++++------------
1 files changed, 79 insertions(+), 86 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c
index c6aec27..44c475b 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.c
@@ -22,17 +22,16 @@ MODULE_DESCRIPTION("FT1000 EXPRESS CARD DRIVER");
MODULE_LICENSE("Dual MPL/GPL");
MODULE_SUPPORTED_DEVICE("QFT FT1000 Express Cards");
-
void *pFileStart;
size_t FileLength;
-#define VENDOR_ID 0x1291 /* Qualcomm vendor id */
-#define PRODUCT_ID 0x11 /* fake product id */
+#define VENDOR_ID 0x1291 /* Qualcomm vendor id */
+#define PRODUCT_ID 0x11 /* fake product id */
/* table of devices that work with this driver */
static struct usb_device_id id_table[] = {
- {USB_DEVICE(VENDOR_ID, PRODUCT_ID)},
- { },
+ {USB_DEVICE(VENDOR_ID, PRODUCT_ID)},
+ {},
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -40,35 +39,34 @@ MODULE_DEVICE_TABLE(usb, id_table);
static BOOLEAN gPollingfailed = FALSE;
int ft1000_poll_thread(void *arg)
{
- int ret = STATUS_SUCCESS;
-
- while (!kthread_should_stop()) {
- msleep(10);
- if (!gPollingfailed) {
- ret = ft1000_poll(arg);
- if (ret != STATUS_SUCCESS) {
- DEBUG("ft1000_poll_thread: polling failed\n");
- gPollingfailed = TRUE;
- }
- }
- }
+ int ret = STATUS_SUCCESS;
+
+ while (!kthread_should_stop()) {
+ msleep(10);
+ if (!gPollingfailed) {
+ ret = ft1000_poll(arg);
+ if (ret != STATUS_SUCCESS) {
+ DEBUG("ft1000_poll_thread: polling failed\n");
+ gPollingfailed = TRUE;
+ }
+ }
+ }
return STATUS_SUCCESS;
}
static int ft1000_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_device *dev;
- unsigned numaltsetting;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_device *dev;
+ unsigned numaltsetting;
int i, ret = 0, size;
- struct ft1000_device *ft1000dev;
- FT1000_INFO *pft1000info;
+ struct ft1000_device *ft1000dev;
+ FT1000_INFO *pft1000info;
const struct firmware *dsp_fw;
-
ft1000dev = kmalloc(sizeof(struct ft1000_device), GFP_KERNEL);
if (!ft1000dev) {
@@ -76,10 +74,10 @@ static int ft1000_probe(struct usb_interface *interface,
return 0;
}
- memset(ft1000dev, 0, sizeof(*ft1000dev));
+ memset(ft1000dev, 0, sizeof(*ft1000dev));
- dev = interface_to_usbdev(interface);
- DEBUG("ft1000_probe: usb device descriptor info:\n");
+ dev = interface_to_usbdev(interface);
+ DEBUG("ft1000_probe: usb device descriptor info:\n");
DEBUG("ft1000_probe: number of configuration is %d\n",
dev->descriptor.bNumConfigurations);
@@ -90,11 +88,10 @@ static int ft1000_probe(struct usb_interface *interface,
ft1000dev->tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
ft1000dev->rx_urb = usb_alloc_urb(0, GFP_ATOMIC);
-
- DEBUG("ft1000_probe is called\n");
- numaltsetting = interface->num_altsetting;
- DEBUG("ft1000_probe: number of alt settings is :%d\n", numaltsetting);
- iface_desc = interface->cur_altsetting;
+ DEBUG("ft1000_probe is called\n");
+ numaltsetting = interface->num_altsetting;
+ DEBUG("ft1000_probe: number of alt settings is :%d\n", numaltsetting);
+ iface_desc = interface->cur_altsetting;
DEBUG("ft1000_probe: number of endpoints is %d\n",
iface_desc->desc.bNumEndpoints);
DEBUG("ft1000_probe: descriptor type is %d\n",
@@ -105,7 +102,7 @@ static int ft1000_probe(struct usb_interface *interface,
iface_desc->desc.bAlternateSetting);
DEBUG("ft1000_probe: interface class is %d\n",
iface_desc->desc.bInterfaceClass);
- DEBUG("ft1000_probe: control endpoint info:\n");
+ DEBUG("ft1000_probe: control endpoint info:\n");
DEBUG("ft1000_probe: descriptor0 type -- %d\n",
iface_desc->endpoint[0].desc.bmAttributes);
DEBUG("ft1000_probe: descriptor1 type -- %d\n",
@@ -113,18 +110,18 @@ static int ft1000_probe(struct usb_interface *interface,
DEBUG("ft1000_probe: descriptor2 type -- %d\n",
iface_desc->endpoint[2].desc.bmAttributes);
- for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint =
- (struct usb_endpoint_descriptor *)&iface_desc->endpoint[i].
- desc;
- DEBUG("endpoint %d\n", i);
+ (struct usb_endpoint_descriptor *)&iface_desc->
+ endpoint[i].desc;
+ DEBUG("endpoint %d\n", i);
DEBUG("bEndpointAddress=%x, bmAttributes=%x\n",
endpoint->bEndpointAddress, endpoint->bmAttributes);
if ((endpoint->bEndpointAddress & USB_DIR_IN)
&& ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_BULK)) {
ft1000dev->bulk_in_endpointAddr =
- endpoint->bEndpointAddress;
+ endpoint->bEndpointAddress;
DEBUG("ft1000_probe: in: %d\n",
endpoint->bEndpointAddress);
}
@@ -133,11 +130,11 @@ static int ft1000_probe(struct usb_interface *interface,
&& ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_BULK)) {
ft1000dev->bulk_out_endpointAddr =
- endpoint->bEndpointAddress;
+ endpoint->bEndpointAddress;
DEBUG("ft1000_probe: out: %d\n",
endpoint->bEndpointAddress);
}
- }
+ }
DEBUG("bulk_in=%d, bulk_out=%d\n", ft1000dev->bulk_in_endpointAddr,
ft1000dev->bulk_out_endpointAddr);
@@ -161,9 +158,9 @@ static int ft1000_probe(struct usb_interface *interface,
FileLength = dsp_fw->size;
release_firmware(dsp_fw);
- DEBUG("ft1000_probe: start downloading dsp image...\n");
- init_ft1000_netdev(ft1000dev);
- pft1000info = (FT1000_INFO *) netdev_priv(ft1000dev->net);
+ DEBUG("ft1000_probe: start downloading dsp image...\n");
+ init_ft1000_netdev(ft1000dev);
+ pft1000info = (FT1000_INFO *) netdev_priv(ft1000dev->net);
DEBUG("In probe: pft1000info=%p\n", pft1000info);
ret = dsp_reload(ft1000dev);
@@ -188,16 +185,15 @@ static int ft1000_probe(struct usb_interface *interface,
DEBUG("ft1000_probe::Waiting for Card Ready\n");
}
+ DEBUG("ft1000_probe::Card Ready!!!! Registering network device\n");
- DEBUG("ft1000_probe::Card Ready!!!! Registering network device\n");
-
- reg_ft1000_netdev(ft1000dev, interface);
+ reg_ft1000_netdev(ft1000dev, interface);
- pft1000info->NetDevRegDone = 1;
+ pft1000info->NetDevRegDone = 1;
- ft1000InitProc(ft1000dev->net);
+ ft1000InitProc(ft1000dev->net);
- return 0;
+ return 0;
err_load:
kfree(pFileStart);
@@ -208,70 +204,67 @@ err_fw:
static void ft1000_disconnect(struct usb_interface *interface)
{
- FT1000_INFO *pft1000info;
+ FT1000_INFO *pft1000info;
- DEBUG("ft1000_disconnect is called\n");
+ DEBUG("ft1000_disconnect is called\n");
- pft1000info = (PFT1000_INFO)usb_get_intfdata(interface);
+ pft1000info = (PFT1000_INFO) usb_get_intfdata(interface);
DEBUG("In disconnect pft1000info=%p\n", pft1000info);
-
-
- if (pft1000info) {
+ if (pft1000info) {
ft1000CleanupProc(pft1000info);
- if (pft1000info->pPollThread)
- kthread_stop(pft1000info->pPollThread );
+ if (pft1000info->pPollThread)
+ kthread_stop(pft1000info->pPollThread);
- DEBUG("ft1000_disconnect: threads are terminated\n");
+ DEBUG("ft1000_disconnect: threads are terminated\n");
- if (pft1000info->pFt1000Dev->net) {
- DEBUG("ft1000_disconnect: destroy char driver\n");
- ft1000_DestroyDevice(pft1000info->pFt1000Dev->net);
- unregister_netdev(pft1000info->pFt1000Dev->net);
- DEBUG("ft1000_disconnect: network device unregisterd\n");
- free_netdev(pft1000info->pFt1000Dev->net);
+ if (pft1000info->pFt1000Dev->net) {
+ DEBUG("ft1000_disconnect: destroy char driver\n");
+ ft1000_DestroyDevice(pft1000info->pFt1000Dev->net);
+ unregister_netdev(pft1000info->pFt1000Dev->net);
+ DEBUG
+ ("ft1000_disconnect: network device unregisterd\n");
+ free_netdev(pft1000info->pFt1000Dev->net);
- }
+ }
- usb_free_urb(pft1000info->pFt1000Dev->rx_urb);
- usb_free_urb(pft1000info->pFt1000Dev->tx_urb);
+ usb_free_urb(pft1000info->pFt1000Dev->rx_urb);
+ usb_free_urb(pft1000info->pFt1000Dev->tx_urb);
- DEBUG("ft1000_disconnect: urb freed\n");
+ DEBUG("ft1000_disconnect: urb freed\n");
kfree(pft1000info->pFt1000Dev);
- }
+ }
kfree(pFileStart);
- return;
+ return;
}
static struct usb_driver ft1000_usb_driver = {
- .name = "ft1000usb",
- .probe = ft1000_probe,
- .disconnect = ft1000_disconnect,
- .id_table = id_table,
+ .name = "ft1000usb",
+ .probe = ft1000_probe,
+ .disconnect = ft1000_disconnect,
+ .id_table = id_table,
};
static int __init usb_ft1000_init(void)
{
- int ret = 0;
+ int ret = 0;
- DEBUG("Initialize and register the driver\n");
+ DEBUG("Initialize and register the driver\n");
- ret = usb_register(&ft1000_usb_driver);
- if (ret)
- err("usb_register failed. Error number %d", ret);
+ ret = usb_register(&ft1000_usb_driver);
+ if (ret)
+ err("usb_register failed. Error number %d", ret);
- return ret;
+ return ret;
}
static void __exit usb_ft1000_exit(void)
{
- DEBUG("Deregister the driver\n");
- usb_deregister(&ft1000_usb_driver);
+ DEBUG("Deregister the driver\n");
+ usb_deregister(&ft1000_usb_driver);
}
-module_init (usb_ft1000_init);
-module_exit (usb_ft1000_exit);
-
-
+module_init(usb_ft1000_init);
+module_exit(usb_ft1000_exit);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists