| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <736145.17319.qm@web25403.mail.ukl.yahoo.com>
Date: Thu, 14 Oct 2010 13:22:14 +0100 (BST)
From: fabio tirapelle <ftirapelle@...oo.it>
To: Bjorn Helgaas <bjorn.helgaas@...com>
Cc: linux-kernel@...r.kernel.org,
Michael Krufky <mkrufky@...nellabs.com>
Subject: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
The WinTV did work correctly with ubuntu 9.10. In this version of Ubuntu the
package linux-firmware-nonfree didn't include the dvb-fe-tda10048-1.0.fw. I
remember that Ubuntu 9.10 used dvb-fe-tda10046.fw.
Now, Ubuntu 10.04 loads for my card the dvb-fe-tda10048-1.0.fw
Its seems that with the 9.10 version, the card is recognized as WinTV-HVR-1100
or 1110 and now as WinTV-HVR-1120.
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1120
How recognize Linux the version of the card?
Thanks
----- Messaggio originale -----
> Da: fabio tirapelle <ftirapelle@...oo.it>
> A: Bjorn Helgaas <bjorn.helgaas@...com>
> Cc: linux-kernel@...r.kernel.org; Michael Krufky <mkrufky@...nellabs.com>
> Inviato: Mer 13 ottobre 2010, 23:26:02
> Oggetto: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
>
>
> Yesterday I have installed (added not substituted) a new tuner: Hauppauge
> Nova-T Stick 3
> Today the WinTV-HVR-1120 doesn't works.
> I attach my /var/log/messages
>
> lsusb
>
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 002: ID 15c2:0036 SoundGraph Inc.
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 002: ID 2040:7070 Hauppauge Nova-T Stick 3
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> lscpi
>
> 00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
>Controller
> (rev a2)
> 00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev
> a2)
> 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
> 00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
>Controller
> (rev a1)
> 00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor
> (rev
> a2)
> 00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
>Controller
> (rev a1)
> 00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB
1.1
> Controller (rev a1)
> 00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB
2.0
> Controller (rev a1)
> 00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB
1.1
> Controller (rev a1)
> 00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB
>2.0
> Controller (rev a1)
> 00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
> 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High
> Definition Audio (rev a1)
> 00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev
> a1)
> 00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA
>Controller
> (non-AHCI mode) (rev a2)
> 00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
> 00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
>Bridge
> (rev a1)
> 00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
>Bridge
> (rev a1)
> 00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
>Bridge
> (rev a1)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>Address
> Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:06.0 Multimedia controller: Philips Semiconductors
SAA7131/SAA7133/SAA7135
> Video Broadcast Decoder (rev d1)
> 01:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
>chip
>
> /
> Technisat SkyStar2 DVB card (rev 02)
> 02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200]
(rev
> a2)
>
>
> > ----- Messaggio originale -----
> > > Da: Bjorn Helgaas <bjorn.helgaas@...com>
> > > A: fabio tirapelle <ftirapelle@...oo.it>
> > > Cc: linux-kernel@...r.kernel.org; Michael Krufky
<mkrufky@...nellabs.com>
> > > Inviato: Mer 13 ottobre 2010, 21:54:31
> > > Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
> > >
> > > On Wednesday, October 13, 2010 01:02:11 pm fabio tirapelle wrote:
> > > > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
> >WinTV-HVR-1120
> >
> > >
> > > > (sometimes) doesn't work correctly.
> > > > I get random the following errors:
> > > >
> > > > tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
>returned:
>
> -5
> > > > tda18271_init: error -5 on line 826
> > > > tda18271_tune: error -5 on line 904
> > > > tda18271_set_params: error -5 on line 985
> > >
> > > I cc'd Michael since he made several recent tda18271 changes.
> > >
> > > This page: http://cvs.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
> > > suggests that the card might work, despite the error messages. Does
> > > yours work?
> > >
> > > I see that tda18271_write_regs() uses i2c_transfer(), which uses the
> > > adap->algo->master_xfer function pointer, but I don't know enough to
> > > figure out which master_xfer implementation might be used on your
> > > system. A complete dmesg log and lspci output might have a hint.
> > >
> > > Can you reproduce this on an upstream kernel? It would be good to
> > > make sure that it's not something introduced by an Ubuntu patch or
> > > fixed since the Ubuntu kernel snapshot.
> > >
> > > Bjorn
> > >
> > > > Part of dmesg of 11-OCT-2010
> > > >
> > > > [ 53.216153] DVB: registering new adapter (saa7133[0])
> > > > [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN
> > >DVB-T)...
> > > > [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> > > > (dvb-fe-tda10048-1.0.fw)...
> > > > [ 53.840019] saa7134 0000:01:06.0: firmware: requesting
> > >dvb-fe-tda10048-1.0.fw
> > > > [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> > > > [ 53.880509] tda10048_firmware_upload: firmware uploading
> > > > [ 58.280136] tda10048_firmware_upload: firmware uploaded
> > > > [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on
> >line
> >
> > >264
> > > > [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 59.420157] tda18271_toggle_output: error -5 on line 47
> > > > [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> > > > [ 256.293639] eth0: link up.
> > > > [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > > > [ 263.523498] eth0: link down.
> > > > [ 265.258740] eth0: link up.
> > > > [ 266.460026] eth0: no IPv6 routers present
> > > > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 9869.636178] tda18271_init: error -5 on line 826
> > > > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> > > > [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 9998.240178] tda18271_init: error -5 on line 826
> > > > [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [10001.240190] tda18271_toggle_output: error -5 on line 47
> > > >
> > > > And this is the dmesg of today: even the same errors.
> > > >
> > > > [ 741.252183] tda18271_init: error -5 on line 826
> > > > [ 741.252188] tda18271_tune: error -5 on line 904
> > > > [ 741.252193] tda18271_set_params: error -5 on line 985
> > > > [ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 742.268184] tda18271_init: error -5 on line 826
> > > > [ 742.268189] tda18271_tune: error -5 on line 904
> > > > [ 742.268194] tda18271_set_params: error -5 on line 985
> > > > [ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 743.284184] tda18271_init: error -5 on line 826
> > > > [ 743.284190] tda18271_tune: error -5 on line 904
> > > > [ 743.284194] tda18271_set_params: error -5 on line 985
> > > > [ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 744.300180] tda18271_init: error -5 on line 826
> > > > [ 744.300185] tda18271_tune: error -5 on line 904
> > > > [ 744.300190] tda18271_set_params: error -5 on line 985
> > > > [ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 745.320183] tda18271_init: error -5 on line 826
> > > > [ 745.320188] tda18271_tune: error -5 on line 904
> > > > [ 745.320193] tda18271_set_params: error -5 on line 985
> > > > [ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 746.336185] tda18271_init: error -5 on line 826
> > > > [ 746.336190] tda18271_tune: error -5 on line 904
> > > > [ 746.336195] tda18271_set_params: error -5 on line 985
> > > > [ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 747.352181] tda18271_init: error -5 on line 826
> > > > [ 747.352187] tda18271_tune: error -5 on line 904
> > > > [ 747.352192] tda18271_set_params: error -5 on line 985
> > > > [ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 748.368183] tda18271_init: error -5 on line 826
> > > > [ 748.368188] tda18271_tune: error -5 on line 904
> > > > [ 748.368193] tda18271_set_params: error -5 on line 985
> > > > [ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 749.384191] tda18271_init: error -5 on line 826
> > > > [ 749.384196] tda18271_tune: error -5 on line 904
> > > > [ 749.384202] tda18271_set_params: error -5 on line 985
> > > > [ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 750.400182] tda18271_init: error -5 on line 826
> > > > [ 750.400188] tda18271_tune: error -5 on line 904
> > > > [ 750.400194] tda18271_set_params: error -5 on line 985
> > > > [ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 751.424181] tda18271_init: error -5 on line 826
> > > > [ 751.424186] tda18271_tune: error -5 on line 904
> > > > [ 751.424192] tda18271_set_params: error -5 on line 985
> > > > [ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > >
>
>
> >
> >
> > >
> > >
> > > >
> > > >
> > > > Any ideas?
> > > > Thanks
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists