lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <DB759C09-975B-4088-B334-79F9010573F8@mac.com>
Date:	Fri, 15 Oct 2010 01:48:53 +0400
From:	Elvis Dowson <elvis.dowson@....com>
To:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux OMAP Mailing List <linux-omap@...r.kernel.org>
Subject: Difference between twl4030_hsmmc_info and omap_mmc_platform_data

Hi,
       I'm trying to bring up a TI WL1271 wlan module connected to MMC2 controller of a TI OMAP 3530 processor. 

I am unclear about the difference between the use of twl4030_hsmmc_info and omap_mmc_platform_data, to set the attributes and constraints for the MMC1 (connected to microSD card) and MMC2 (connected to WLAN module). 

The beagleboard uses twl4030_mmc_init, which has a wrapper for omap_mmc_platform_data defined in mmc-twl4030.h. 

The board-sholes-hsmmc.c doesn't use twl4030, but directly uses the omap_mmc_platform_data structure. 

Example: 

board-omap3beagle.c uses twl4030_mmc_init, which internally uses the following structure to define mmc properties. 

static struct twl4030_hsmmc_info mmc[] = {
	{
		.mmc            = 1,
		.wires          = 8,
		.gpio_wp        = -ENOSYS,
		.gpio_cd        = -ENOSYS,
		.name           = "MMC1 controller slot"
	},
	{
		.mmc            = 2,
		.wires          = 4,
		.gpio_cd        = -EINVAL,
		.gpio_wp        = -EINVAL,
//		.transceiver    = true,
		.name           = "MMC2 controller slot",
		.ocr_mask       = 0x00000080,
	},
	{}	/* Terminator */
};

For board-sholes-hsmmc.c, it uses a omap_mmc_platform_data

static struct omap_mmc_platform_data mmc1_data = {
	.nr_slots			= 1,
	.init				= hsmmc_late_init,
	.cleanup			= hsmmc_cleanup,
#ifdef CONFIG_PM
	.suspend			= hsmmc_suspend,
	.resume				= hsmmc_resume,
#endif
	.dma_mask			= 0xffffffff,
	.slots[0] = {
		.wires			= 8,
		.set_power		= hsmmc_set_power,
		.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34 |
						MMC_VDD_165_195,
		.name			= "first slot",
		/* we get car_detect_irq later */
		.card_detect_irq	= 0,
		.card_detect            = hsmmc_card_detect,
	},
};

#if defined(CONFIG_OMAP_HS_MMC2)
#ifdef CONFIG_MMC_EMBEDDED_SDIO
static struct sdio_embedded_func wifi_func_array[] = {
	{
		.f_class        = SDIO_CLASS_NONE,
		.f_maxblksize   = 0,
	},
	{
		.f_class        = SDIO_CLASS_WLAN,
		.f_maxblksize   = 512,
	},
};

static struct embedded_sdio_data sholes_wifi_emb_data = {
	.cis    = {
		.vendor         = 0x104c,
		.device         = 0x9066,
		.blksize        = 512,
		.max_dtr        = 24000000,
	},
	.cccr   = {
		.multi_block    = 1,
		.low_speed      = 0,
		.wide_bus       = 1,
		.high_power     = 0,
		.high_speed     = 0,
	},
	.funcs  = wifi_func_array,
	.num_funcs = 2,
};
#endif

static struct omap_mmc_platform_data mmc2_data = {
	.nr_slots			= 1,
	.init				= hsmmc2_late_init,
	.cleanup			= hsmmc2_cleanup,
#ifdef CONFIG_PM
	.suspend			= hsmmc2_suspend,
	.resume				= hsmmc2_resume,
#endif
	.dma_mask			= 0xffffffff,
#ifndef CONFIG_MMC_EMBEDDED_SDIO
	.name				= "TIWLAN_SDIO",
#endif
	.slots[0] = {
		.wires			= 4,
		.set_power		= hsmmc2_set_power,
		.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34 |
						MMC_VDD_165_195,
		.name			= "first slot",
		.internal_clock		= 1,
		.card_detect_irq        = 0,
		.card_detect            = hsmmc2_card_detect,
#ifdef CONFIG_MMC_EMBEDDED_SDIO
		.embedded_sdio		= &sholes_wifi_emb_data,
		.register_status_notify	= &sholes_wifi_status_register,
#endif
	},
};
#endif

Best regards,

Elvis Dowson
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ