--- /temp/dmesg-2.6.35.7-smp.txt 2010-10-16 15:46:04.855806001 +0200 +++ /temp/dmesg-2.6.35.7-nosmp.txt 2010-10-16 15:58:01.668384001 +0200 @@ -1,5 +1,5 @@ Linux version 2.6.35.7 (root@f6bvp-9) (gcc version 4.4.3 (GCC) ) #2 SMP Fri Oct 15 03:06:19 CEST 2010 -Command line: BOOT_IMAGE=2.6.35.7 root=UUID=082f0a78-6929-42dc-8d73-a249c2168c19 resume=UUID=cfa31406-4714-4734-ad27-ef4400c41f0c splash=silent vga=788 +Command line: BOOT_IMAGE=2.6.35.7 root=UUID=082f0a78-6929-42dc-8d73-a249c2168c19 nosmp resume=UUID=cfa31406-4714-4734-ad27-ef4400c41f0c splash=silent vga=788 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) @@ -79,16 +79,18 @@ ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) -ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) -IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 -ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) -ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) -ACPI: IRQ0 used by override. -ACPI: IRQ2 used by override. -ACPI: IRQ9 used by override. -Using ACPI (MADT) for SMP configuration information +ACPI: Skipping IOAPIC probe due to 'noapic' option. +Using ACPI for processor (LAPIC) configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 -SMP: Allowing 4 CPUs, 2 hotplug CPUs +Intel MultiProcessor Specification v1.4 +MPTABLE: OEM ID: Intel +MPTABLE: Product ID: Eaglelake +MPTABLE: APIC at: 0xFEE00000 +I/O APIC #2 Version 32 at 0xFEC00000. +IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 +Processors: 2 +2 Processors exceeds max_cpus limit of 0 +SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [170c0 - 178bf] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 @@ -96,20 +98,20 @@ PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000) Booting paravirtualized kernel on bare hardware -setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 -PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s89920 r8192 d20672 u524288 -pcpu-alloc: s89920 r8192 d20672 u524288 alloc=1*2097152 -pcpu-alloc: [0] 0 1 2 3 +setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 +PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s89920 r8192 d20672 u2097152 +pcpu-alloc: s89920 r8192 d20672 u2097152 alloc=1*2097152 +pcpu-alloc: [0] 0 Built 1 zonelists in Node order, mobility grouping on. Total pages: 258336 Policy zone: DMA32 -Kernel command line: BOOT_IMAGE=2.6.35.7 root=UUID=082f0a78-6929-42dc-8d73-a249c2168c19 resume=UUID=cfa31406-4714-4734-ad27-ef4400c41f0c splash=silent vga=788 +Kernel command line: BOOT_IMAGE=2.6.35.7 root=UUID=082f0a78-6929-42dc-8d73-a249c2168c19 nosmp resume=UUID=cfa31406-4714-4734-ad27-ef4400c41f0c splash=silent vga=788 PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! -Subtract (49 early reservations) +Subtract (46 early reservations) #1 [0001000000 - 00018772b8] TEXT DATA BSS #2 [0037a21000 - 0037ff0000] RAMDISK #3 [0001878000 - 000187819d] BRK @@ -143,23 +145,20 @@ #31 [0001877980 - 00018779e8] BOOTMEM #32 [0001877a00 - 0001877a68] BOOTMEM #33 [0001877a80 - 0001877aa0] BOOTMEM - #34 [0001877ac0 - 0001877b4a] BOOTMEM - #35 [0001877b80 - 0001877c0a] BOOTMEM + #34 [0001877ac0 - 0001877b50] BOOTMEM + #35 [0001877b80 - 0001877c10] BOOTMEM #36 [0001a00000 - 0001a1d000] BOOTMEM - #37 [0001a80000 - 0001a9d000] BOOTMEM - #38 [0001b00000 - 0001b1d000] BOOTMEM - #39 [0001b80000 - 0001b9d000] BOOTMEM - #40 [0001877c40 - 0001877c48] BOOTMEM - #41 [0001877c80 - 0001877c88] BOOTMEM - #42 [0001877cc0 - 0001877cd0] BOOTMEM - #43 [0001877d00 - 0001877d20] BOOTMEM - #44 [0001877d40 - 0001877e70] BOOTMEM - #45 [0001877e80 - 0001877ed0] BOOTMEM - #46 [0001877f00 - 0001877f50] BOOTMEM - #47 [00018b0000 - 00018b8000] BOOTMEM - #48 [00018ae1c0 - 00018ae400] BOOTMEM -Memory: 1017960k/1048128k available (3885k kernel code, 452k absent, 29716k reserved, 3013k data, 688k init) -SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 + #37 [0001877c40 - 0001877c48] BOOTMEM + #38 [0001877c80 - 0001877c88] BOOTMEM + #39 [0001877cc0 - 0001877cc4] BOOTMEM + #40 [0001877d00 - 0001877d08] BOOTMEM + #41 [0001877d40 - 0001877e90] BOOTMEM + #42 [0001877ec0 - 0001877f40] BOOTMEM + #43 [0001877f40 - 0001877fc0] BOOTMEM + #44 [00018b0000 - 00018b8000] BOOTMEM + #45 [00018ae1c0 - 00018ae400] BOOTMEM +Memory: 1018308k/1048128k available (3885k kernel code, 452k absent, 29368k reserved, 3013k data, 688k init) +SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. @@ -168,16 +167,15 @@ console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT -Detected 2807.010 MHz processor. -Calibrating delay loop (skipped), value calculated using timer frequency.. 5614.02 BogoMIPS (lpj=2807010) +Detected 2806.589 MHz processor. +Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.17 BogoMIPS (lpj=2806589) pid_max: default: 32768 minimum: 301 Security Framework initialized TOMOYO Linux initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 -CPU: Physical Processor ID: 0 -CPU: Processor Core ID: 0 +CPU: Unsupported number of siblings 2 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. @@ -189,17 +187,19 @@ ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 +SMP alternatives: switching to UP code +Freeing SMP alternatives: 16k freed ACPI: Core revision 20100428 +ACPI: setting ELCR to 0200 (from 0001) ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 15316 entries in 61 pages Setting APIC routing to flat -..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 -CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a -Booting Node 0, Processors #1 -Brought up 2 CPUs -Total of 2 processors activated (11227.61 BogoMIPS). +SMP mode deactivated. +SMP disabled +Brought up 1 CPUs +Total of 1 processors activated (5613.17 BogoMIPS). devtmpfs: initialized -Time: 10:30:53 Date: 10/16/10 +Time: 13:50:43 Date: 10/16/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) @@ -214,9 +214,58 @@ ACPI: SSDT 000000003ff9e380 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20051117) +------------[ cut here ]------------ +WARNING: at mm/page_alloc.c:1981 __alloc_pages_nodemask+0x5b4/0x6d0() +Hardware name: MS-7519 +Modules linked in: +Pid: 1, comm: swapper Not tainted 2.6.35.7 #2 +Call Trace: + [] warn_slowpath_common+0x7f/0xc0 + [] warn_slowpath_null+0x1a/0x20 + [] __alloc_pages_nodemask+0x5b4/0x6d0 + [] ? __ioremap_caller+0x290/0x3b0 + [] alloc_page_interleave+0x45/0xa0 + [] alloc_pages_current+0xb9/0xe0 + [] ? acpi_ex_system_memory_space_handler+0x0/0x1e7 + [] __get_free_pages+0xe/0x50 + [] __kmalloc+0x14e/0x1c0 + [] acpi_os_allocate+0x2a/0x2c + [] acpi_ex_load_op+0xdd/0x295 + [] acpi_ex_opcode_1A_1T_0R+0x2a/0x50 + [] acpi_ds_exec_end_op+0xef/0x3dc + [] acpi_ps_parse_loop+0x7de/0x962 + [] ? acpi_ds_call_control_method+0x177/0x1e6 + [] acpi_ps_parse_aml+0x9f/0x2be + [] acpi_ps_execute_method+0x1d2/0x2a1 + [] acpi_ns_evaluate+0xe6/0x1ad + [] acpi_evaluate_object+0xfe/0x1f7 + [] acpi_processor_set_pdc+0x1c3/0x1ed + [] early_init_pdc+0xba/0xbd + [] acpi_ns_walk_namespace+0xbe/0x18c + [] ? early_init_pdc+0x0/0xbd + [] ? early_init_pdc+0x0/0xbd + [] acpi_walk_namespace+0x8a/0xc4 + [] ? acpi_init+0x0/0x11c + [] ? acpi_init+0x0/0x11c + [] acpi_early_processor_set_pdc+0x3a/0x3c + [] acpi_bus_init+0xb5/0x1de + [] ? kobject_create_and_add+0x3e/0x80 + [] ? genhd_device_init+0x0/0x7b + [] ? acpi_init+0x0/0x11c + [] acpi_init+0x71/0x11c + [] do_one_initcall+0x3c/0x1d0 + [] kernel_init+0x156/0x1e0 + [] kernel_thread_helper+0x4/0x10 + [] ? kernel_init+0x0/0x1e0 + [] ? kernel_thread_helper+0x0/0x10 +---[ end trace a7919e7f17c0a725 ]--- +ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.P003._OSC] (Node ffff88003f9be7a0), AE_NO_MEMORY +ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.P003._PDC] (Node ffff88003f9be780), AE_NO_MEMORY +ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.P004._OSC] (Node ffff88003f9be820), AE_NO_MEMORY +ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.P004._PDC] (Node ffff88003f9be800), AE_NO_MEMORY ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) -ACPI: Using IOAPIC for interrupt routing +ACPI: Using PIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. @@ -350,7 +399,7 @@ system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved -system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved +system 00:0c: [mem 0xfec00000-0xfec00fff] has been reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0d: [io 0x0a00-0x0adf] has been reserved system 00:0d: [io 0x0ae0-0x0aef] has been reserved @@ -386,15 +435,19 @@ pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] -pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 +PCI: setting IRQ 10 as level-triggered +pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0105 -> 0107) -pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 +ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 +PCI: setting IRQ 5 as level-triggered +pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0104 -> 0107) -pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 +pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:1c.1: setting latency timer to 64 -pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 +pci 0000:00:1c.5: PCI INT B -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] @@ -435,11 +488,11 @@ Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5948k freed audit: initializing netlink socket (disabled) -type=2000 audit(1287225053.259:1): initialized +type=2000 audit(1287237043.175:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) -msgmni has been set to 1999 +msgmni has been set to 2000 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered @@ -477,8 +530,8 @@ PM: Checking image partition UUID=cfa31406-4714-4734-ad27-ef4400c41f0c PM: Resume from disk failed. registered taskstats version 1 - Magic number: 14:762:527 -rtc_cmos 00:03: setting system clock to 2010-10-16 10:30:54 UTC (1287225054) + Magic number: 14:392:837 +rtc_cmos 00:03: setting system clock to 2010-10-16 13:50:43 UTC (1287237043) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 688k freed usbcore: registered new interface driver usbfs @@ -488,13 +541,15 @@ usbcore: registered new interface driver usbhid usbhid: USB HID core driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 +ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 14 +PCI: setting IRQ 14 as level-triggered +ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported -ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 +ehci_hcd 0000:00:1a.7: irq 14, io mem 0xf9fffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 @@ -503,13 +558,15 @@ usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected -ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 +ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6 +PCI: setting IRQ 6 as level-triggered +ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 6 (level, low) -> IRQ 6 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported -ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 +ehci_hcd 0000:00:1d.7: irq 6, io mem 0xf9fff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 @@ -520,11 +577,11 @@ hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver -uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 -uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 +uhci_hcd 0000:00:1a.0: irq 10, io base 0x0000bc00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller @@ -532,11 +589,13 @@ usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected -uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 +ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 +PCI: setting IRQ 11 as level-triggered +uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 -uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 +uhci_hcd 0000:00:1a.1: irq 11, io base 0x0000b880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller @@ -544,11 +603,13 @@ usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected -uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 +ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15 +PCI: setting IRQ 15 as level-triggered +uhci_hcd 0000:00:1a.2: PCI INT D -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 -uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 +uhci_hcd 0000:00:1a.2: irq 15, io base 0x0000b800 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller @@ -556,11 +617,11 @@ usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected -uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 +uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 6 (level, low) -> IRQ 6 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 -uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 +uhci_hcd 0000:00:1d.0: irq 6, io base 0x0000b480 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller @@ -568,11 +629,11 @@ usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected -uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 +uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 -uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 +uhci_hcd 0000:00:1d.1: irq 15, io base 0x0000b400 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller @@ -580,11 +641,11 @@ usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected -uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 +uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 -uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 +uhci_hcd 0000:00:1d.2: irq 14, io base 0x0000b080 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller @@ -595,20 +656,20 @@ SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.13 -ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 +ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix -ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 -ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 -ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 +ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 15 +ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 15 +ata_piix 0000:00:1f.5: PCI INT B -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix -ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 -ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 +ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 15 +ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 15 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) usb 4-2: new low speed USB device using uhci_hcd and address 2 @@ -633,17 +694,17 @@ sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sd 1:0:1:0: [sda] Attached SCSI disk -pata_acpi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +pata_acpi 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pata_acpi 0000:02:00.0: setting latency timer to 64 pata_acpi 0000:02:00.0: PCI INT A disabled Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 -pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +pata_jmicron 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pata_jmicron 0000:02:00.0: setting latency timer to 64 scsi4 : pata_jmicron scsi5 : pata_jmicron -ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 -ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 +ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 10 +ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 10 usb 5-1: New USB device found, idVendor=1241, idProduct=1503 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB Keyboard @@ -661,14 +722,14 @@ EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. udev: starting version 153 -ACPI: acpi_idle registered with cpuidle +parport_pc 00:07: reported by Plug and Play ACPI +parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] +ppdev: user-space parallel port driver input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] -parport_pc 00:07: reported by Plug and Play ACPI -parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] -ppdev: user-space parallel port driver +ACPI: acpi_idle registered with cpuidle device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com EXT4-fs (sda1): re-mounted. Opts: acl @@ -676,7 +737,7 @@ EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl Adding 4088504k swap on /dev/sda5. Priority:-1 extents:1 across:4088504k [drm] Initialized drm 1.1.0 20060810 -nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x098200a2) checking generic (fb000000 e00000) vs hw (d0000000 10000000) @@ -709,7 +770,7 @@ [drm] nouveau 0000:01:00.0: 0xC3D8: parsing output script 0 [drm] nouveau 0000:01:00.0: 0xAE2E: parsing output script 0 [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM -[TTM] Zone kernel: Available graphics memory: 512298 kiB. +[TTM] Zone kernel: Available graphics memory: 512480 kiB. [TTM] Initializing pool allocator. [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 @@ -722,7 +783,7 @@ [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: no encoders, ignoring -[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88003eeb2000 +[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88003e2a5000 Console: switching to colour frame buffer device 160x64 fb0: nouveaufb frame buffer device drm: registered panic notifier @@ -733,20 +794,22 @@ [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:01:00.0: 0x11F1: parsing clock script 0 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded -r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 +r8169 0000:04:00.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: irq 44 for MSI/MSI-X -r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc9001359e000, 00:21:85:5e:a8:9e, XID 1c4000c0 IRQ 44 -i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 +r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc9001055a000, 00:21:85:5e:a8:9e, XID 1c4000c0 IRQ 44 +i801_smbus 0000:00:1f.3: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14 iTCO_vendor_support: vendor-support=0 -sd 1:0:1:0: Attached scsi generic sg0 type 0 -scsi 4:0:0:0: Attached scsi generic sg1 type 5 +iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 +iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 -iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 -iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it -HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 +sd 1:0:1:0: Attached scsi generic sg0 type 0 +sr 4:0:0:0: Attached scsi generic sg1 type 5 +ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3 +PCI: setting IRQ 3 as level-triggered +HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 3 (level, low) -> IRQ 3 HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 SKU: Nid=0x1d sku_cfg=0x4007f603 @@ -802,4 +865,3 @@ mkiss: ax0: Trying crc-smack mkiss: ax0: Trying crc-flexnet xfbbd uses old SIOCAX25GETINFO -fuse init (API version 7.14)