linux-kernel - EAPOL bridging

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <4CBB3B24.2000106@gmail.com>
Date:	Sun, 17 Oct 2010 14:06:28 -0400
From:	Benjamin Poirier <benjamin.poirier@...il.com>
To:	bridge@...ts.linux-foundation.org
CC:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: EAPOL bridging

Hello,

I have some trouble bridging EAPOL frames. I'd like to do this to allow 
wired 802.1x authentication from within a kvm virtual machine. I have 
the following setup:

kvm -- tap0 -- br0 -- eth1 -- 802.1x authenticator (switch) -- more network

and it doesn't work. I've added a few logging rules to ebtables. I only 
see an EAPOL frame going through the INPUT chain of tap0. It seems to be 
dropped by the bridge. The EAPOL frame is an ethernet link local 
multicast frame with destination address 01-80-C2-00-00-03, "IEEE Std 
802.1X PAE address".

I've looked at http://standards.ieee.org/regauth/groupmac/tutorial.html, 
which says that frames with a destination in the range 01-80-C2-00-00-00 
to 01-80-C2-00-00-0F should not be forwarded by standard conformant 
bridges. I've also looked at net/bridge/br_input.c and br_handle_frame() 
seems quite intent on "bending" the standard when STP is disabled, but 
only for 01-80-C2-00-00-00. However there are more applications that use 
similar addresses, EAPOL included: 
http://standards.ieee.org/regauth/groupmac/Standard_Group_MAC_Address_assignments.pdf

Given the current state of affairs, would it be acceptable to make the 
code more permissive by forwarding all the range of reserved group 
addresses when STP is disabled? If not, what would be the way to go 
about enabling 802.1x authentication from within a virtual machine?

BTW, it seems this issue has been raised before, 
https://lists.linux-foundation.org/pipermail/bridge/2007-November/005629.html
with the conclusion that
> Despite what the standards say, many users are using bridging code for invisible
> firewalls etc, and in those cases they want STP and EAPOL frames to be forwarded.

Thanks,
-Ben
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/