[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1287442218-7265-1-git-send-email-vapier@gentoo.org>
Date: Mon, 18 Oct 2010 18:50:17 -0400
From: Mike Frysinger <vapier@...too.org>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org,
device-drivers-devel@...ckfin.uclinux.org,
Michael Hennerich <michael.hennerich@...log.com>
Subject: [PATCH 1/2] gpio: adp5588-gpio: support interrupt controller
From: Michael Hennerich <michael.hennerich@...log.com>
This patch implements irq_chip functionality on ADP5588/5587 GPIO
expanders. Only level sensitive interrupts are supported.
Interrupts provided by this irq_chip must be requested using
request_threaded_irq().
Signed-off-by: Michael Hennerich <michael.hennerich@...log.com>
Signed-off-by: Mike Frysinger <vapier@...too.org>
---
drivers/gpio/Kconfig | 7 ++
drivers/gpio/adp5588-gpio.c | 252 +++++++++++++++++++++++++++++++++++++++++--
include/linux/i2c/adp5588.h | 1 +
3 files changed, 253 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 510aa20..24d426d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -267,6 +267,13 @@ config GPIO_ADP5588
To compile this driver as a module, choose M here: the module will be
called adp5588-gpio.
+config GPIO_ADP5588_IRQ
+ bool "Interrupt controller support for ADP5588"
+ depends on GPIO_ADP5588=y
+ help
+ Say yes here to enable the adp5588 to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
+
comment "PCI GPIO expanders:"
config GPIO_CS5535
diff --git a/drivers/gpio/adp5588-gpio.c b/drivers/gpio/adp5588-gpio.c
index 2e8e9e2..57bd2cb 100644
--- a/drivers/gpio/adp5588-gpio.c
+++ b/drivers/gpio/adp5588-gpio.c
@@ -1,8 +1,8 @@
/*
* GPIO Chip driver for Analog Devices
- * ADP5588 I/O Expander and QWERTY Keypad Controller
+ * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller
*
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -13,21 +13,50 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/i2c/adp5588.h>
+ /* Configuration Register1 */
+#define AUTO_INC (1 << 7)
+#define GPIEM_CFG (1 << 6)
+#define OVR_FLOW_M (1 << 5)
+#define INT_CFG (1 << 4)
+#define OVR_FLOW_IEN (1 << 3)
+#define K_LCK_IM (1 << 2)
+#define GPI_IEN (1 << 1)
+#define KE_IEN (1 << 0)
+
+/* Interrupt Status Register */
+#define GPI_INT (1 << 1)
+#define KE_INT (1 << 0)
+
#define DRV_NAME "adp5588-gpio"
#define MAXGPIO 18
#define ADP_BANK(offs) ((offs) >> 3)
#define ADP_BIT(offs) (1u << ((offs) & 0x7))
+/*
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
+ * since the Event Counter Register updated 25ms after the interrupt
+ * asserted.
+ */
+#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
+
struct adp5588_gpio {
struct i2c_client *client;
struct gpio_chip gpio_chip;
struct mutex lock; /* protect cached dir, dat_out */
+ struct mutex irq_lock; /* P: IRQ */
unsigned gpio_start;
+ unsigned irq_base;
uint8_t dat_out[3];
uint8_t dir[3];
+ uint8_t int_lvl[3];
+ uint8_t int_en[3];
+ uint8_t irq_mask[3];
+ uint8_t irq_stat[3];
};
static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
@@ -125,6 +154,200 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
return ret;
}
+#ifdef CONFIG_GPIO_ADP5588_IRQ
+static int adp5588_gpio_to_irq(struct gpio_chip *chip, unsigned off)
+{
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+ return dev->irq_base + off;
+}
+
+static void adp5588_irq_bus_lock(unsigned int irq)
+{
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
+ mutex_lock(&dev->irq_lock);
+}
+
+static void adp5588_irq_bus_sync_unlock(unsigned int irq)
+{
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
+ int i;
+
+ for (i = 0; i <= ADP_BANK(MAXGPIO); i++)
+ if (dev->int_en[i] ^ dev->irq_mask[i]) {
+ dev->int_en[i] = dev->irq_mask[i];
+ adp5588_gpio_write(dev->client, GPIO_INT_EN1 + i,
+ dev->int_en[i]);
+ }
+
+ mutex_unlock(&dev->irq_lock);
+}
+
+static void adp5588_irq_mask(unsigned int irq)
+{
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
+ unsigned gpio = irq - dev->irq_base;
+
+ dev->irq_mask[ADP_BANK(gpio)] &= ~ADP_BIT(gpio);
+}
+
+static void adp5588_irq_unmask(unsigned int irq)
+{
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
+ unsigned gpio = irq - dev->irq_base;
+
+ dev->irq_mask[ADP_BANK(gpio)] |= ADP_BIT(gpio);
+}
+
+static int adp5588_irq_set_type(unsigned int irq, unsigned int type)
+{
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
+ uint16_t gpio = irq - dev->irq_base;
+ unsigned bank, bit;
+
+ if ((type & IRQ_TYPE_EDGE_BOTH)) {
+ dev_err(&dev->client->dev, "irq %d: unsupported type %d\n",
+ irq, type);
+ return -EINVAL;
+ }
+
+ bank = ADP_BANK(gpio);
+ bit = ADP_BIT(gpio);
+
+ if (type & IRQ_TYPE_LEVEL_HIGH)
+ dev->int_lvl[bank] |= bit;
+ else if (type & IRQ_TYPE_LEVEL_LOW)
+ dev->int_lvl[bank] &= ~bit;
+ else
+ return -EINVAL;
+
+ might_sleep();
+
+ adp5588_gpio_direction_input(&dev->gpio_chip, gpio);
+ adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + bank,
+ dev->int_lvl[bank]);
+
+ return 0;
+}
+
+static struct irq_chip adp5588_irq_chip = {
+ .name = "adp5588",
+ .mask = adp5588_irq_mask,
+ .unmask = adp5588_irq_unmask,
+ .bus_lock = adp5588_irq_bus_lock,
+ .bus_sync_unlock = adp5588_irq_bus_sync_unlock,
+ .set_type = adp5588_irq_set_type,
+};
+
+static int adp5588_gpio_read_intstat(struct i2c_client *client, u8 *buf)
+{
+ int ret = i2c_smbus_read_i2c_block_data(client, GPIO_INT_STAT1, 3, buf);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Read INT_STAT Error\n");
+
+ return ret;
+}
+
+static irqreturn_t adp5588_irq_handler(int irq, void *devid)
+{
+ struct adp5588_gpio *dev = devid;
+ unsigned status, bank, bit, pending;
+ int ret;
+ status = adp5588_gpio_read(dev->client, INT_STAT);
+
+ if (status & GPI_INT) {
+ ret = adp5588_gpio_read_intstat(dev->client, dev->irq_stat);
+ if (ret < 0)
+ memset(dev->irq_stat, 0, ARRAY_SIZE(dev->irq_stat));
+
+ for (bank = 0; bank <= ADP_BANK(MAXGPIO); bank++, bit = 0) {
+ pending = dev->irq_stat[bank] & dev->irq_mask[bank];
+
+ while (pending) {
+ if (pending & (1 << bit)) {
+ handle_nested_irq(dev->irq_base +
+ (bank << 3) + bit);
+ pending &= ~(1 << bit);
+
+ }
+ bit++;
+ }
+ }
+ }
+
+ adp5588_gpio_write(dev->client, INT_STAT, status); /* Status is W1C */
+
+ return IRQ_HANDLED;
+}
+
+static int adp5588_irq_setup(struct adp5588_gpio *dev)
+{
+ struct i2c_client *client = dev->client;
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ unsigned gpio;
+ int ret;
+
+ adp5588_gpio_write(client, CFG, AUTO_INC);
+ adp5588_gpio_write(client, INT_STAT, -1); /* status is W1C */
+ adp5588_gpio_read_intstat(client, dev->irq_stat); /* read to clear */
+
+ dev->irq_base = pdata->irq_base;
+ mutex_init(&dev->irq_lock);
+
+ for (gpio = 0; gpio < dev->gpio_chip.ngpio; gpio++) {
+ int irq = gpio + dev->irq_base;
+ set_irq_chip_data(irq, dev);
+ set_irq_chip_and_handler(irq, &adp5588_irq_chip,
+ handle_level_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ ret = request_threaded_irq(client->irq,
+ NULL,
+ adp5588_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), dev);
+ if (ret) {
+ dev_err(&client->dev, "failed to request irq %d\n",
+ client->irq);
+ goto out;
+ }
+
+ dev->gpio_chip.to_irq = adp5588_gpio_to_irq;
+ adp5588_gpio_write(client, CFG, AUTO_INC | INT_CFG | GPI_INT);
+
+ return 0;
+
+out:
+ dev->irq_base = 0;
+ return ret;
+}
+static void adp5588_irq_teardown(struct adp5588_gpio *dev)
+{
+ if (dev->irq_base)
+ free_irq(dev->client->irq, dev);
+}
+
+#else
+static int adp5588_irq_setup(struct adp5588_gpio *dev)
+{
+ struct i2c_client *client = dev->client;
+ dev_warn(&client->dev, "interrupt support not compiled in\n");
+
+ return 0;
+}
+
+static void adp5588_irq_teardown(struct adp5588_gpio *dev)
+{
+}
+#endif /* CONFIG_GPIO_ADP5588_IRQ */
+
static int __devinit adp5588_gpio_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -166,7 +389,6 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
mutex_init(&dev->lock);
-
ret = adp5588_gpio_read(dev->client, DEV_ID);
if (ret < 0)
goto err;
@@ -179,18 +401,28 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
(pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
-
+ ret |= adp5588_gpio_write(client, GPIO_INT_EN1 + i, 0);
if (ret)
goto err;
}
+ if (pdata->irq_base) {
+ if (WA_DELAYED_READOUT_REVID(revid)) {
+ dev_warn(&client->dev, "GPIO int not supported\n");
+ } else {
+ ret = adp5588_irq_setup(dev);
+ if (ret)
+ goto err;
+ }
+ }
+
ret = gpiochip_add(&dev->gpio_chip);
if (ret)
- goto err;
+ goto err_irq;
- dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n",
+ dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n",
gc->base, gc->base + gc->ngpio - 1,
- client->name, revid);
+ pdata->irq_base, client->name, revid);
if (pdata->setup) {
ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
@@ -199,8 +431,11 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
}
i2c_set_clientdata(client, dev);
+
return 0;
+err_irq:
+ adp5588_irq_teardown(dev);
err:
kfree(dev);
return ret;
@@ -222,6 +457,9 @@ static int __devexit adp5588_gpio_remove(struct i2c_client *client)
}
}
+ if (dev->irq_base)
+ free_irq(dev->client->irq, dev);
+
ret = gpiochip_remove(&dev->gpio_chip);
if (ret) {
dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
index 269181b..8bdd83c 100644
--- a/include/linux/i2c/adp5588.h
+++ b/include/linux/i2c/adp5588.h
@@ -128,6 +128,7 @@ struct adp5588_kpad_platform_data {
struct adp5588_gpio_platform_data {
unsigned gpio_start; /* GPIO Chip base # */
+ unsigned irq_base; /* interrupt base # */
unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
int (*setup)(struct i2c_client *client,
int gpio, unsigned ngpio,
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists