| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20101019201841.GC14410@hmsreliant.think-freely.org>
Date: Tue, 19 Oct 2010 16:18:41 -0400
From: Neil Horman <nhorman@...driver.com>
To: Leandro Lucarella <luca@...cax.com.ar>
Cc: David Miller <davem@...emloft.net>, paul.gortmaker@...driver.com,
jon.maloy@...csson.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, tipc-discussion@...ts.sourceforge.net
Subject: Re: Linux 2.6.35/TIPC 2.0 ABI breaking changes
On Tue, Oct 19, 2010 at 10:19:36AM -0300, Leandro Lucarella wrote:
> Neil Horman, el 19 de octubre a las 07:04 me escribiste:
> > On Tue, Oct 19, 2010 at 01:16:49AM -0700, David Miller wrote:
> > > From: Leandro Lucarella <luca@...cax.com.ar>
> > > Date: Mon, 18 Oct 2010 23:16:57 -0300
> > >
> > > >
> > > > The problem is not between the tipc stacks in different hosts, is
> > > > between the tipc stack and the applications using it (well, maybe
> > > > there is a problem somewhere else too).
> > > >
> > > > This was a deliberate API change, not a subtle bug...
> > >
> > > Neil et al., if these packets live only between the kernel stack
> > > and the userspace API layer, we should not be byte-swapping this
> > > stuff and we need to fix this fast.
> > >
> > Copy that Dave. I think I see the problem. The subscription code handles
> > messages both off the wire and from local user space. The off the wire case
> > should work because the subscription code assumes that all the incomming data is
> > in network byte order, but user space is an exception to that rule as its in
> > local byte order. I'll have a patch together for Leandro to test soon.
> > Neil
>
> Thank you very much. Bare in mind that the byte order is just one of the
> problems, the other problem is the change in the value of
> TIPC_SUB_SERVICE from 2 to 0. That too is breaking the API/ABI, as
> a message with a filter value of 2 is rejected by TIPC 2.0/2.6.35+.
>
> --
> Leandro Lucarella (AKA luca) http://llucax.com.ar/
> ----------------------------------------------------------------------
> GPG Key: 5F5A8D05 (F8CD F9A7 BF00 5431 4145 104C 949E BFB6 5F5A 8D05)
> ----------------------------------------------------------------------
> Dentro de 30 años Argentina va a ser un gran supermercado con 15
> changuitos, porque esa va a ser la cantidad de gente que va a poder
> comprar algo.
> -- Sidharta Wiki
>
Hey all-
Heres what I have so far. Dave as a heads up please don't apply this
yet. I'd like to go over it a bit more and be sure of the implications here
before I post it for inclusion officially. I wanted Leandro to have a copy
though so he could confirm functionality for us. Leandro, This patch lets me
pass the tipc test code for TIPC 1.6 that you posted earlier this morning. If
you could confirm that it works for you that would be grand. While your doing
that, I want to read over the spec for TIPC and make sure that I'm not breaking
anything new with this patch.
Thanks!
Neil
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index 181c8d0..d8de884 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -127,9 +127,10 @@ static inline unsigned int tipc_node(__u32 addr)
* TIPC topology subscription service definitions
*/
-#define TIPC_SUB_SERVICE 0x00 /* Filter for service availability */
-#define TIPC_SUB_PORTS 0x01 /* Filter for port availability */
+#define TIPC_SUB_SERVICE 0x01 /* Filter for service availability */
+#define TIPC_SUB_PORTS 0x02 /* Filter for port availability */
#define TIPC_SUB_CANCEL 0x04 /* Cancel a subscription */
+#define TIPC_SUB_MASK (TIPC_SUB_SERVICE|TIPC_SUB_PORTS|TIPC_SUB_CANCEL)
#define TIPC_WAIT_FOREVER ~0 /* timeout for permanent subscription */
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 18813ac..06682e1 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -75,6 +75,17 @@ struct top_srv {
static struct top_srv topsrv = { 0 };
+/*
+ * Detect the need for an endian swap.
+ * user space sends subscriber info in
+ * host byte order while the kernel expects
+ * it in network byte order. To correct this
+ * lets check the filter bits, if there in the
+ * right place we know this is in network byte order
+ * otherwise it needs swapping around to maintain compatibility
+ */
+#define tipc_need_endian_swap(s) (!((s)->filter & TIPC_SUB_MASK))
+
/**
* subscr_send_event - send a message containing a tipc_event to the subscriber
*
@@ -279,11 +290,21 @@ static void subscr_cancel(struct tipc_subscr *s,
/* Find first matching subscription, exit if not found */
- type = ntohl(s->seq.type);
- lower = ntohl(s->seq.lower);
- upper = ntohl(s->seq.upper);
- timeout = ntohl(s->timeout);
- filter = ntohl(s->filter) & ~TIPC_SUB_CANCEL;
+ if (tipc_need_endian_swap(s)) {
+ printk(KERN_CRIT "Swapping endianess in subscr_cancel\n");
+ type = ntohl(s->seq.type);
+ lower = ntohl(s->seq.lower);
+ upper = ntohl(s->seq.upper);
+ timeout = ntohl(s->timeout);
+ filter = ntohl(s->filter) & ~TIPC_SUB_CANCEL;
+ } else {
+ printk(KERN_CRIT "NOT Swapping endianess in subscr_cancel\n");
+ type = s->seq.type;
+ lower = s->seq.lower;
+ upper = s->seq.upper;
+ timeout = s->timeout;
+ filter = s->filter & ~TIPC_SUB_CANCEL;
+ }
list_for_each_entry_safe(sub, sub_temp, &subscriber->subscription_list,
subscription_list) {
@@ -325,10 +346,19 @@ static struct subscription *subscr_subscribe(struct tipc_subscr *s,
struct subscriber *subscriber)
{
struct subscription *sub;
+ __u32 filter;
/* Detect & process a subscription cancellation request */
- if (ntohl(s->filter) & TIPC_SUB_CANCEL) {
+ if (tipc_need_endian_swap(s)) {
+ printk(KERN_CRIT "Swapping endianess in subscr_subscribe\n");
+ filter = ntohl(s->filter);
+ } else {
+ printk(KERN_CRIT "NOT Swapping endianess in subscr_subscribe\n");
+ filter = s->filter;
+ }
+
+ if (filter & TIPC_SUB_CANCEL) {
subscr_cancel(s, subscriber);
return NULL;
}
@@ -353,11 +383,22 @@ static struct subscription *subscr_subscribe(struct tipc_subscr *s,
/* Initialize subscription object */
- sub->seq.type = ntohl(s->seq.type);
- sub->seq.lower = ntohl(s->seq.lower);
- sub->seq.upper = ntohl(s->seq.upper);
- sub->timeout = ntohl(s->timeout);
- sub->filter = ntohl(s->filter);
+ if (tipc_need_endian_swap(s)) {
+ printk(KERN_CRIT "Swapping endianess in subscr_subscribe\n");
+ sub->seq.type = ntohl(s->seq.type);
+ sub->seq.lower = ntohl(s->seq.lower);
+ sub->seq.upper = ntohl(s->seq.upper);
+ sub->timeout = ntohl(s->timeout);
+ sub->filter = ntohl(s->filter);
+ } else {
+ printk(KERN_CRIT "NOT Swapping endianess in subscr_subscribe\n");
+ sub->seq.type = s->seq.type;
+ sub->seq.lower = s->seq.lower;
+ sub->seq.upper = s->seq.upper;
+ sub->timeout = s->timeout;
+ sub->filter = s->filter;
+ }
+
if ((sub->filter && (sub->filter != TIPC_SUB_PORTS)) ||
(sub->seq.lower > sub->seq.upper)) {
warn("Subscription rejected, illegal request\n");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists