lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 19 Oct 2010 11:41:19 +0900
From:	Kukjin Kim <kgene.kim@...sung.com>
To:	'Darius Augulis' <augulis.darius@...il.com>
Cc:	linux-arm-kernel@...ts.infradead.org, paulius.zaleckas@...il.com,
	linux-kernel@...r.kernel.org, ben-linux@...ff.org
Subject: RE: [PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410

Darius Augulis wrote:
> 
> On Mon, Oct 18, 2010 at 4:39 PM, Kukjin Kim <kgene.kim@...sung.com> wrote:
> > Darius Augulis wrote:
> >>
> >> Add USB host device support for mach-real6410
> >>
> >> Signed-off-by: Darius Augulis <augulis.darius@...il.com>
> >> ---
> >>  arch/arm/mach-s3c64xx/Kconfig         |    1 +
> >>  arch/arm/mach-s3c64xx/mach-real6410.c |    1 +
> >>  2 files changed, 2 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/arch/arm/mach-s3c64xx/Kconfig
b/arch/arm/mach-s3c64xx/Kconfig
> >> index b706b80..c05ae12 100644
> >> --- a/arch/arm/mach-s3c64xx/Kconfig
> >> +++ b/arch/arm/mach-s3c64xx/Kconfig
> >> @@ -109,6 +109,7 @@ config MACH_REAL6410
> >>       select S3C_DEV_NAND
> >>       select SAMSUNG_DEV_ADC
> >>       select SAMSUNG_DEV_TS
> >> +     select S3C_DEV_USB_HOST
> >>       help
> >>         Machine support for the CoreWind REAL6410
> >>
> >> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-
> >> s3c64xx/mach-real6410.c
> >> index bad6990..00e7d7e 100644
> >> --- a/arch/arm/mach-s3c64xx/mach-real6410.c
> >> +++ b/arch/arm/mach-s3c64xx/mach-real6410.c
> >> @@ -195,6 +195,7 @@ static struct platform_device *real6410_devices[]
> >> __initdata = {
> >>       &s3c_device_nand,
> >>       &s3c_device_adc,
> >>       &s3c_device_ts,
> >> +     &s3c_device_ohci,
> >>  };
> >>
> >>  static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
> >
> > No need any gpio configuration for it?
> 
> No, USB is powered by hardware at startup and does not need any other
> gpio config.
> 

Hmm...firstly see below...

+-----+        +------ UTMI -------- OTG Device
| PHY |--------|
+-----+        +--- Serial I/F 1 --- Host 1.1 (1port)

+---------------+
|USB Transceiver|-- Serial I/F 2 --- Host 1.1 (1port)
+---------------+

If you want to use only 1port Host 1.1 through Serial I/F2, your code is ok.
but want to use 2-port Host 1.1, need to set configuration of PHY
initialization and clock path for Serial I/F1.
I meant that.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@...sung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists