Message-ID: <AANLkTintn2pFAWP679=fmyEdGzMwZWdqyoG4YCdB_9Y9@mail.gmail.com>
Date:	Thu, 21 Oct 2010 09:26:09 -0400
From:	Pavan Savoy <pavan_savoy@...y.com>
To:	padovan@...fusion.mobi, marcel@...tmann.org
Cc:	linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
	Pavan Savoy <pavan_savoy@...com>
Subject: Re: [PATCH v4] Bluetooth: btwilink driver

Gustavo, Marcel,

On Tue, Oct 19, 2010 at 6:06 PM,  <pavan_savoy@...com> wrote:
> From: Pavan Savoy <pavan_savoy@...com>
>
> v4 comments
>
> module init now returns what platform_driver_register returns.
> type casting of void* private data has been removed

If there are no more critical comments, can it go in?
Please review.

Thanks,
Pavan

> v3 comments
>
> Lizardo,
> I have taken care of most of the comments you had.
> Have re-wrote some of the code commenting you've mentioned.
> Thanks for the comments,
>
> Marcel, Gustavo, & list,
> Please review this version of patch.
>
> The other few like -EPERM for platform driver registration is to keep
> it similar to other drivers, type casting is maintained just to feel safe
> and have style similar to other drivers.
> BT_WILINK in Kconfig is similar to BT_MRVL.
> I hope those aren't too critical.
>
> -- patch description --
>
> This is the bluetooth protocol driver for the TI WiLink7 chipsets.
> Texas Instrument's WiLink chipsets combine wireless technologies
> like BT, FM, GPS and WLAN onto a single chip.
>
> This Bluetooth driver works on top of the TI_ST shared transport
> line discipline driver which also allows other drivers like
> FM V4L2 and GPS character driver to make use of the same UART interface.
>
> Kconfig and Makefile modifications to enable the Bluetooth
> driver for Texas Instrument's WiLink 7 chipset.
>
> Signed-off-by: Pavan Savoy <pavan_savoy@...com>
> ---
>  drivers/bluetooth/Kconfig    |   10 +
>  drivers/bluetooth/Makefile   |    1 +
>  drivers/bluetooth/btwilink.c |  411 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 422 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/bluetooth/btwilink.c
>
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> index 02deef4..8e0de9a 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -219,4 +219,14 @@ config BT_ATH3K
>          Say Y here to compile support for "Atheros firmware download driver"
>          into the kernel or say M to compile it as module (ath3k).
>
> +config BT_WILINK
> +       tristate "Texas Instruments WiLink7 driver"
> +       depends on TI_ST
> +       help
> +         This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
> +         combo devices. This makes use of shared transport line discipline
> +         core driver to communicate with the BT core of the combo chip.
> +
> +         Say Y here to compile support for Texas Instrument's WiLink7 driver
> +         into the kernel or say M to compile it as module.
>  endmenu
> diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
> index 71bdf13..f4460f4 100644
> --- a/drivers/bluetooth/Makefile
> +++ b/drivers/bluetooth/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_BT_HCIBTSDIO)    += btsdio.o
>  obj-$(CONFIG_BT_ATH3K)         += ath3k.o
>  obj-$(CONFIG_BT_MRVL)          += btmrvl.o
>  obj-$(CONFIG_BT_MRVL_SDIO)     += btmrvl_sdio.o
> +obj-$(CONFIG_BT_WILINK)                += btwilink.o
>
>  btmrvl-y                       := btmrvl_main.o
>  btmrvl-$(CONFIG_DEBUG_FS)      += btmrvl_debugfs.o
> diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
> new file mode 100644
> index 0000000..218efd6
> --- /dev/null
> +++ b/drivers/bluetooth/btwilink.c
> @@ -0,0 +1,411 @@
> +/*
> + *  Texas Instrument's Bluetooth Driver For Shared Transport.
> + *
> + *  Bluetooth Driver acts as interface between HCI core and
> + *  TI Shared Transport Layer.
> + *
> + *  Copyright (C) 2009-2010 Texas Instruments
> + *  Author: Raja Mani <raja_mani@...com>
> + *     Pavan Savoy <pavan_savoy@...com>
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License
> + *  along with this program; if not, write to the Free Software
> + *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + *
> + */
> +
> +#include <linux/platform_device.h>
> +#include <net/bluetooth/bluetooth.h>
> +#include <net/bluetooth/hci_core.h>
> +
> +#include <linux/ti_wilink_st.h>
> +
> +/* Bluetooth Driver Version */
> +#define VERSION               "1.0"
> +
> +/* Number of seconds to wait for registration completion
> + * when ST returns PENDING status.
> + */
> +#define BT_REGISTER_TIMEOUT   6000     /* 6 sec */
> +
> +/**
> + * struct ti_st - driver operation structure
> + * @hdev: hci device pointer which binds to bt driver
> + * @reg_status: ST registration callback status
> + * @st_write: write function provided by the ST driver
> + *     to be used by the driver during send_frame.
> + * @wait_reg_completion - completion sync between ti_st_open
> + *     and ti_st_registration_completion_cb.
> + */
> +struct ti_st {
> +       struct hci_dev *hdev;
> +       char reg_status;
> +       long (*st_write) (struct sk_buff *);
> +       struct completion wait_reg_completion;
> +};
> +
> +static int reset;
> +
> +/* Increments HCI counters based on pocket ID (cmd,acl,sco) */
> +static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
> +{
> +       struct hci_dev *hdev;
> +       hdev = hst->hdev;
> +
> +       /* Update HCI stat counters */
> +       switch (pkt_type) {
> +       case HCI_COMMAND_PKT:
> +               hdev->stat.cmd_tx++;
> +               break;
> +
> +       case HCI_ACLDATA_PKT:
> +               hdev->stat.acl_tx++;
> +               break;
> +
> +       case HCI_SCODATA_PKT:
> +               hdev->stat.sco_tx++;
> +               break;
> +       }
> +}
> +
> +/* ------- Interfaces to Shared Transport ------ */
> +
> +/* Called by ST layer to indicate protocol registration completion
> + * status.ti_st_open() function will wait for signal from this
> + * API when st_register() function returns ST_PENDING.
> + */
> +static void st_registration_completion_cb(void *priv_data, char data)
> +{
> +       struct ti_st *lhst = priv_data;
> +
> +       /* Save registration status for use in ti_st_open() */
> +       lhst->reg_status = data;
> +       /* complete the wait in ti_st_open() */
> +       complete(&lhst->wait_reg_completion);
> +}
> +
> +/* Called by Shared Transport layer when receive data is
> + * available */
> +static long st_receive(void *priv_data, struct sk_buff *skb)
> +{
> +       int err;
> +       struct ti_st *lhst = priv_data;
> +
> +       if (!skb)
> +               return -EFAULT;
> +
> +       if (!lhst) {
> +               kfree_skb(skb);
> +               return -EFAULT;
> +       }
> +
> +       skb->dev = (struct net_device *)lhst->hdev;
> +
> +       /* Forward skb to HCI core layer */
> +       err = hci_recv_frame(skb);
> +       if (err) {
> +               kfree_skb(skb);
> +               BT_ERR("Unable to push skb to HCI core(%d)", err);
> +               return err;
> +       }
> +
> +       lhst->hdev->stat.byte_rx += skb->len;
> +
> +       return 0;
> +}
> +
> +/* ------- Interfaces to HCI layer ------ */
> +/* protocol structure registered with shared transport */
> +static struct st_proto_s ti_st_proto = {
> +       .type = ST_BT,
> +       .recv = st_receive,
> +       .reg_complete_cb = st_registration_completion_cb,
> +       .priv_data = NULL,
> +};
> +
> +/* Called from HCI core to initialize the device */
> +static int ti_st_open(struct hci_dev *hdev)
> +{
> +       unsigned long timeleft;
> +       struct ti_st *hst;
> +       int err;
> +
> +       BT_DBG("%s %p", hdev->name, hdev);
> +
> +       /* provide contexts for callbacks from ST */
> +       hst = hdev->driver_data;
> +       ti_st_proto.priv_data = hst;
> +
> +       err = st_register(&ti_st_proto);
> +       if (err == -EINPROGRESS) {
> +               /* Prepare wait-for-completion handler data structures.
> +                * Needed to synchronize this and
> +                * st_registration_completion_cb() functions.
> +                */
> +               init_completion(&hst->wait_reg_completion);
> +
> +               /* Reset ST registration callback status flag , this value
> +                * will be updated in ti_st_registration_completion_cb()
> +                * function whenever it called from ST driver.
> +                */
> +               hst->reg_status = -EINPROGRESS;
> +
> +               /* ST is busy with either protocol registration or firmware
> +                * download. Wait until the registration callback is called
> +                */
> +               BT_DBG(" waiting for registration completion signal from ST");
> +
> +               timeleft = wait_for_completion_timeout
> +                       (&hst->wait_reg_completion,
> +                        msecs_to_jiffies(BT_REGISTER_TIMEOUT));
> +               if (!timeleft) {
> +                       BT_ERR("Timeout(%d sec),didn't get reg "
> +                                       "completion signal from ST",
> +                                       BT_REGISTER_TIMEOUT / 1000);
> +                       return -ETIMEDOUT;
> +               }
> +
> +               /* Is ST registration callback called with ERROR status? */
> +               if (hst->reg_status != 0) {
> +                       BT_ERR("ST registration completed with invalid "
> +                                       "status %d", hst->reg_status);
> +                       return -EAGAIN;
> +               }
> +               err = 0;
> +       } else if (err == -EPERM) {
> +               BT_ERR("st_register failed %d", err);
> +               return err;
> +       }
> +
> +       hst->st_write = ti_st_proto.write;
> +       if (!hst->st_write) {
> +               BT_ERR("undefined ST write function");
> +
> +               /* Undo registration with ST */
> +               err = st_unregister(ST_BT);
> +               if (err)
> +                       BT_ERR("st_unregister() failed with error %d", err);
> +
> +               hst->st_write = NULL;
> +               return err;
> +       }
> +
> +       /* Registration with ST layer is successful,
> +        * hardware is ready to accept commands from HCI core.
> +        */
> +       set_bit(HCI_RUNNING, &hdev->flags);
> +
> +       return err;
> +}
> +
> +/* Close device */
> +static int ti_st_close(struct hci_dev *hdev)
> +{
> +       int err;
> +       struct ti_st *hst = hdev->driver_data;
> +
> +       /* continue to unregister from transport */
> +       err = st_unregister(ST_BT);
> +       if (err)
> +               BT_ERR("st_unregister() failed with error %d", err);
> +
> +       hst->st_write = NULL;
> +
> +       return err;
> +}
> +
> +static int ti_st_send_frame(struct sk_buff *skb)
> +{
> +       struct hci_dev *hdev;
> +       struct ti_st *hst;
> +       long len;
> +
> +       if (!skb)
> +               return -ENOMEM;
> +
> +       hdev = (struct hci_dev *)skb->dev;
> +       if (!hdev)
> +               return -ENODEV;
> +
> +       if (!test_bit(HCI_RUNNING, &hdev->flags))
> +               return -EBUSY;
> +
> +       hst = hdev->driver_data;
> +
> +       /* Prepend skb with frame type */
> +       memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
> +
> +       BT_DBG(" %s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
> +                       skb->len);
> +
> +       /* Insert skb to shared transport layer's transmit queue.
> +        * Freeing skb memory is taken care in shared transport layer,
> +        * so don't free skb memory here.
> +        */
> +       if (!hst->st_write) {
> +               kfree_skb(skb);
> +               BT_ERR(" Could not write to ST (st_write is NULL)");
> +               return -EAGAIN;
> +       }
> +
> +       len = hst->st_write(skb);
> +       if (len < 0) {
> +               kfree_skb(skb);
> +               BT_ERR(" ST write failed (%ld)", len);
> +               return -EAGAIN;
> +       }
> +
> +       /* ST accepted our skb. So, Go ahead and do rest */
> +       hdev->stat.byte_tx += len;
> +       ti_st_tx_complete(hst, bt_cb(skb)->pkt_type);
> +
> +       return 0;
> +}
> +
> +static void ti_st_destruct(struct hci_dev *hdev)
> +{
> +       if (!hdev)
> +               return;
> +
> +       BT_DBG("%s", hdev->name);
> +
> +       /* free ti_st memory */
> +       kfree(hdev->driver_data);
> +
> +       return;
> +}
> +
> +/* Creates new HCI device */
> +static int ti_st_register_dev(struct ti_st *hst)
> +{
> +       int err;
> +       struct hci_dev *hdev;
> +
> +       /* Initialize and register HCI device */
> +       hdev = hci_alloc_dev();
> +       if (!hdev)
> +               return -ENOMEM;
> +
> +       BT_DBG("hdev %p", hdev);
> +
> +       hst->hdev = hdev;
> +       hdev->bus = HCI_UART;
> +       hdev->driver_data = hst;
> +       hdev->open = ti_st_open;
> +       hdev->close = ti_st_close;
> +       hdev->flush = NULL;
> +       hdev->send = ti_st_send_frame;
> +       hdev->destruct = ti_st_destruct;
> +       hdev->owner = THIS_MODULE;
> +
> +       if (reset)
> +               set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
> +
> +       err = hci_register_dev(hdev);
> +       if (err < 0) {
> +               BT_ERR("Can't register HCI device error %d", err);
> +               hci_free_dev(hdev);
> +               return err;
> +       }
> +
> +       BT_DBG(" HCI device registered (hdev %p)", hdev);
> +       return 0;
> +}
> +
> +
> +static int bt_ti_probe(struct platform_device *pdev)
> +{
> +       int err;
> +       static struct ti_st *hst;
> +
> +       BT_DBG(" Bluetooth Driver Version %s", VERSION);
> +
> +       hst = kzalloc(sizeof(struct ti_st), GFP_KERNEL);
> +       if (!hst)
> +               return -ENOMEM;
> +
> +       /* Expose "hciX" device to user space */
> +       err = ti_st_register_dev(hst);
> +       if (err) {
> +               kfree(hst);
> +               return err;
> +       }
> +
> +       dev_set_drvdata(&pdev->dev, hst);
> +       return err;
> +}
> +
> +static int bt_ti_remove(struct platform_device *pdev)
> +{
> +       struct ti_st *hst;
> +       struct hci_dev *hdev;
> +
> +       hst = dev_get_drvdata(&pdev->dev);
> +
> +       if (!hst)
> +               return -EFAULT;
> +
> +       /* Deallocate local resource's memory  */
> +       hdev = hst->hdev;
> +
> +       if (!hdev) {
> +               BT_ERR("Invalid hdev memory");
> +               kfree(hst);
> +               return -EFAULT;
> +       }
> +
> +       ti_st_close(hdev);
> +       hci_unregister_dev(hdev);
> +       /* Free HCI device memory */
> +       hci_free_dev(hdev);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver btwilink_driver = {
> +       .probe = bt_ti_probe,
> +       .remove = bt_ti_remove,
> +       .driver = {
> +               .name = "btwilink",
> +               .owner = THIS_MODULE,
> +       },
> +};
> +
> +/* ------- Module Init/Exit interfaces ------ */
> +static int __init bt_drv_init(void)
> +{
> +       long ret;
> +
> +       ret = platform_driver_register(&btwilink_driver);
> +       if (ret != 0) {
> +               BT_ERR("btwilink platform driver registration failed");
> +               return ret;
> +       }
> +       return 0;
> +}
> +
> +static void __exit bt_drv_exit(void)
> +{
> +       platform_driver_unregister(&btwilink_driver);
> +}
> +
> +module_init(bt_drv_init);
> +module_exit(bt_drv_exit);
> +
> +/* ------ Module Info ------ */
> +
> +module_param(reset, bool, 0644);
> +MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
> +MODULE_AUTHOR("Raja Mani <raja_mani@...com>");
> +MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
> +MODULE_VERSION(VERSION);
> +MODULE_LICENSE("GPL");
> --
> 1.6.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists