| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1287688604.27008.16.camel@ank32.eng.vmware.com>
Date: Thu, 21 Oct 2010 12:16:44 -0700
From: Alok Kataria <akataria@...are.com>
To: John Stultz <johnstul@...ibm.com>
Cc: LKML <linux-kernel@...r.kernel.org>,
"jacob.jun.pan@...el.com" <jacob.jun.pan@...el.com>,
Glauber Costa <glommer@...hat.com>,
Dimitri Sivanich <sivanich@....com>,
Rusty Russell <rusty@...tcorp.com.au>,
Jeremy Fitzhardinge <jeremy@...source.com>,
Chris McDermott <lcm@...ibm.com>,
Thomas Gleixner <tglx@...utronix.de>
Subject: Re: [PATCH 1/7] x86: Convert remaining clocksources to
clocksource_register_hz/khz
Hi John,
vmiclock_32.c doesn't exist anymore in tip and pretty soon should
disappear from mainline too.
Alok
On Wed, 2010-10-20 at 16:44 -0700, John Stultz wrote:
> This converts the remaining x86 clocksources to use
> clocksource_register_hz/khz. I was not able to test them, so
> any extra assistance to make sure time functions properly with
> the clocksources changeed here would be appreciated!
>
> CC: jacob.jun.pan@...el.com
> CC: Glauber Costa <glommer@...hat.com>
> CC: Dimitri Sivanich <sivanich@....com>
> CC: Alok N Kataria <akataria@...are.com>
> CC: Rusty Russell <rusty@...tcorp.com.au>
> CC: Jeremy Fitzhardinge <jeremy@...source.com>
> CC: Chris McDermott <lcm@...ibm.com>
> CC: Thomas Gleixner <tglx@...utronix.de>
> Signed-off-by: John Stultz <johnstul@...ibm.com>
> ---
> arch/x86/kernel/apb_timer.c | 10 +---------
> arch/x86/kernel/i8253.c | 6 +-----
> arch/x86/kernel/kvmclock.c | 6 +-----
> arch/x86/kernel/uv_time.c | 6 +-----
> arch/x86/kernel/vmiclock_32.c | 9 +--------
> arch/x86/lguest/boot.c | 4 +---
> arch/x86/xen/time.c | 6 +-----
> drivers/clocksource/cyclone.c | 10 ++--------
> 8 files changed, 9 insertions(+), 48 deletions(-)
>
> diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
> index 8dd7780..c5ad23c 100644
> --- a/arch/x86/kernel/apb_timer.c
> +++ b/arch/x86/kernel/apb_timer.c
> @@ -177,7 +177,6 @@ static struct clocksource clocksource_apbt = {
> .rating = APBT_CLOCKSOURCE_RATING,
> .read = apbt_read_clocksource,
> .mask = APBT_MASK,
> - .shift = APBT_SHIFT,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> .resume = apbt_restart_clocksource,
> };
> @@ -598,14 +597,7 @@ static int apbt_clocksource_register(void)
> if (t1 == apbt_read_clocksource(&clocksource_apbt))
> panic("APBT counter not counting. APBT disabled\n");
>
> - /*
> - * initialize and register APBT clocksource
> - * convert that to ns/clock cycle
> - * mult = (ns/c) * 2^APBT_SHIFT
> - */
> - clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
> - (unsigned long) apbt_freq, APBT_SHIFT);
> - clocksource_register(&clocksource_apbt);
> + clocksource_register_khz(&clocksource_apbt,(u32)apbt_freq*1000);
>
> return 0;
> }
> diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
> index 2dfd315..212fe65 100644
> --- a/arch/x86/kernel/i8253.c
> +++ b/arch/x86/kernel/i8253.c
> @@ -188,8 +188,6 @@ static struct clocksource pit_cs = {
> .rating = 110,
> .read = pit_read,
> .mask = CLOCKSOURCE_MASK(32),
> - .mult = 0,
> - .shift = 20,
> };
>
> static int __init init_pit_clocksource(void)
> @@ -205,9 +203,7 @@ static int __init init_pit_clocksource(void)
> pit_ce.mode != CLOCK_EVT_MODE_PERIODIC)
> return 0;
>
> - pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift);
> -
> - return clocksource_register(&pit_cs);
> + return clocksource_register_hz(&pit_cs, CLOCK_TICK_RATE);
> }
> arch_initcall(init_pit_clocksource);
>
> diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
> index eb9b76c..532fa9b 100644
> --- a/arch/x86/kernel/kvmclock.c
> +++ b/arch/x86/kernel/kvmclock.c
> @@ -26,8 +26,6 @@
> #include <asm/x86_init.h>
> #include <asm/reboot.h>
>
> -#define KVM_SCALE 22
> -
> static int kvmclock = 1;
> static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
> static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
> @@ -120,8 +118,6 @@ static struct clocksource kvm_clock = {
> .read = kvm_clock_get_cycles,
> .rating = 400,
> .mask = CLOCKSOURCE_MASK(64),
> - .mult = 1 << KVM_SCALE,
> - .shift = KVM_SCALE,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -212,7 +208,7 @@ void __init kvmclock_init(void)
> machine_ops.crash_shutdown = kvm_crash_shutdown;
> #endif
> kvm_get_preset_lpj();
> - clocksource_register(&kvm_clock);
> + clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
> pv_info.paravirt_enabled = 1;
> pv_info.name = "KVM";
>
> diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
> index 56e421b..6f86d74 100644
> --- a/arch/x86/kernel/uv_time.c
> +++ b/arch/x86/kernel/uv_time.c
> @@ -40,7 +40,6 @@ static struct clocksource clocksource_uv = {
> .rating = 400,
> .read = uv_read_rtc,
> .mask = (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK,
> - .shift = 10,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -370,14 +369,11 @@ static __init int uv_rtc_setup_clock(void)
> if (!is_uv_system())
> return -ENODEV;
>
> - clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
> - clocksource_uv.shift);
> -
> /* If single blade, prefer tsc */
> if (uv_num_possible_blades() == 1)
> clocksource_uv.rating = 250;
>
> - rc = clocksource_register(&clocksource_uv);
> + rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
> if (rc)
> printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
> else
> diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
> index 5e1ff66..e3401ec 100644
> --- a/arch/x86/kernel/vmiclock_32.c
> +++ b/arch/x86/kernel/vmiclock_32.c
> @@ -290,8 +290,6 @@ static struct clocksource clocksource_vmi = {
> .rating = 450,
> .read = read_real_cycles,
> .mask = CLOCKSOURCE_MASK(64),
> - .mult = 0, /* to be set */
> - .shift = 22,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -305,13 +303,8 @@ static int __init init_vmi_clocksource(void)
> cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
> (void)do_div(cycles_per_msec, 1000);
>
> - /* Note that clocksource.{mult, shift} converts in the opposite direction
> - * as clockevents. */
> - clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec,
> - clocksource_vmi.shift);
> -
> printk(KERN_WARNING "vmi: registering clock source khz=%lld\n", cycles_per_msec);
> - return clocksource_register(&clocksource_vmi);
> + return clocksource_register_khz(&clocksource_vmi, cycles_per_msec);
>
> }
> module_init(init_vmi_clocksource);
> diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
> index 9d5f558..3f2fd65 100644
> --- a/arch/x86/lguest/boot.c
> +++ b/arch/x86/lguest/boot.c
> @@ -910,8 +910,6 @@ static struct clocksource lguest_clock = {
> .rating = 200,
> .read = lguest_clock_read,
> .mask = CLOCKSOURCE_MASK(64),
> - .mult = 1 << 22,
> - .shift = 22,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -994,7 +992,7 @@ static void lguest_time_init(void)
> /* Set up the timer interrupt (0) to go to our simple timer routine */
> set_irq_handler(0, lguest_time_irq);
>
> - clocksource_register(&lguest_clock);
> + clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
>
> /* We can't set cpumask in the initializer: damn C limitations! Set it
> * here and register our timer device. */
> diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
> index b2bb5aa..ce02ef8 100644
> --- a/arch/x86/xen/time.c
> +++ b/arch/x86/xen/time.c
> @@ -26,8 +26,6 @@
>
> #include "xen-ops.h"
>
> -#define XEN_SHIFT 22
> -
> /* Xen may fire a timer up to this many ns early */
> #define TIMER_SLOP 100000
> #define NS_PER_TICK (1000000000LL / HZ)
> @@ -211,8 +209,6 @@ static struct clocksource xen_clocksource __read_mostly = {
> .rating = 400,
> .read = xen_clocksource_get_cycles,
> .mask = ~0,
> - .mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
> - .shift = XEN_SHIFT,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -444,7 +440,7 @@ static __init void xen_time_init(void)
> int cpu = smp_processor_id();
> struct timespec tp;
>
> - clocksource_register(&xen_clocksource);
> + clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
>
> if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
> /* Successfully turned off 100Hz tick, so we have the
> diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
> index 64e528e..72f811f 100644
> --- a/drivers/clocksource/cyclone.c
> +++ b/drivers/clocksource/cyclone.c
> @@ -29,8 +29,6 @@ static struct clocksource clocksource_cyclone = {
> .rating = 250,
> .read = read_cyclone,
> .mask = CYCLONE_TIMER_MASK,
> - .mult = 10,
> - .shift = 0,
> .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
>
> @@ -108,12 +106,8 @@ static int __init init_cyclone_clocksource(void)
> }
> cyclone_ptr = cyclone_timer;
>
> - /* sort out mult/shift values: */
> - clocksource_cyclone.shift = 22;
> - clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
> - clocksource_cyclone.shift);
> -
> - return clocksource_register(&clocksource_cyclone);
> + return clocksource_register_hz(&clocksource_cyclone,
> + CYCLONE_TIMER_FREQ);
> }
>
> arch_initcall(init_cyclone_clocksource);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists