linux-kernel - RE: [PATCHv4 2/2] ARM: imx: Add wake functionality to GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <86A0E76937111F4C92FABEC0A2098851051D5EDD@az33exm21>
Date:	Thu, 21 Oct 2010 12:37:43 -0700
From:	Nguyen Dinh-R00091 <R00091@...escale.com>
To:	Uwe Kleine-König 
	<u.kleine-koenig@...gutronix.de>
CC:	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux@....linux.org.uk>,
	<s.hauer@...gutronix.de>, <valentin.longchamp@...l.ch>,
	<daniel@...aq.de>, <grant.likely@...retlab.ca>,
	<bryan.wu@...onical.com>, <amit.kucheria@...onical.com>,
	Zhang Lily-R58066 <R58066@...escale.com>
Subject: RE: [PATCHv4 2/2] ARM: imx: Add wake functionality to GPIO

Hi Uwe,

>-----Original Message-----
>From: Uwe Kleine-König [mailto:u.kleine-koenig@...gutronix.de]
>Sent: Thursday, October 21, 2010 2:15 PM
>To: Nguyen Dinh-R00091
>Cc: linux-kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux@....linux.org.uk;
>s.hauer@...gutronix.de; valentin.longchamp@...l.ch; daniel@...aq.de; grant.likely@...retlab.ca;
>bryan.wu@...onical.com; amit.kucheria@...onical.com; Zhang Lily-R58066
>Subject: Re: [PATCHv4 2/2] ARM: imx: Add wake functionality to GPIO
>
>On Thu, Oct 21, 2010 at 01:55:24PM -0500, Dinh.Nguyen@...escale.com wrote:
>> From: Dinh Nguyen <Dinh.Nguyen@...escale.com>
>>
>> Add function definition for irq_chip.set_wake to enable GPIO to
>> wake-up the system.
>>
>> This patch is based on Sascha Hauer's imx/linux-2.6 for-rmk tree.
>>
>> This patch has been tested on a MX51 Babbage system that had suspend
>> code implemented. The set_wake implementation is necessary for a
>> GPIO to wake up a system from suspend.
>>
>> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@...escale.com>
>> ---
>>  arch/arm/plat-mxc/gpio.c |   32 ++++++++++++++++++++++++++++++++
>>  1 files changed, 32 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
>> index 9d38da0..9c3e362 100644
>> --- a/arch/arm/plat-mxc/gpio.c
>> +++ b/arch/arm/plat-mxc/gpio.c
>> @@ -20,6 +20,7 @@
>>   */
>>
>>  #include <linux/init.h>
>> +#include <linux/interrupt.h>
>>  #include <linux/io.h>
>>  #include <linux/irq.h>
>>  #include <linux/gpio.h>
>> @@ -201,11 +202,42 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
>>  	}
>>  }
>>
>> +/*
>> + * Set interrupt number "irq" in the GPIO as a wake-up source.
>> + * While system is running, all registered GPIO interrupts need to have
>> + * wake-up enabled. When system is suspended, only selected GPIO interrupts
>> + * need to have wake-up enabled.
>> + * @param  irq          interrupt source number
>> + * @param  enable       enable as wake-up if equal to non-zero
>> + * @return       This function returns 0 on success.
>> + */
>> +static int gpio_set_wake_irq(u32 irq, u32 enable)
>> +{
>> +	u32 gpio = irq_to_gpio(irq);
>> +	u32 gpio_idx = gpio & 0x1F;
>> +	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
>> +
>> +	if (enable) {
>> +		if (port->irq_high && (gpio_idx >= 16))
>> +			enable_irq_wake(port->irq_high);
>> +		else
>> +			enable_irq_wake(port->irq);
>> +	} else {
>> +		if (port->irq_high && (gpio_idx >= 16))
>> +			disable_irq_wake(port->irq_high);
>> +		else
>> +			disable_irq_wake(port->irq);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>Is this really enough to let the CPU wake up?  Is this implementation
>correct for all i.MX SoCs?

I tested the code to wakeup from suspend on my MX51 Babbage board, without this code the power button on the Babbage board will not wakeup the system. It appears that in the gpio-keys.c, gpio_keys_suspend() will call the enable_irq_wake, which then will call the GPIO's set_wake function on the GPIO pin. This implementation should be correct for all i.MX SoCs.

>
>Best regards
>Uwe
>
>>  static struct irq_chip gpio_irq_chip = {
>>  	.ack = gpio_ack_irq,
>>  	.mask = gpio_mask_irq,
>>  	.unmask = gpio_unmask_irq,
>>  	.set_type = gpio_set_irq_type,
>> +	.set_wake = gpio_set_wake_irq,
>>  };
>>
>>  static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
>> --
>> 1.6.0.4
>>
>>
>>
>
>--
>Pengutronix e.K.                           | Uwe Kleine-König            |
>Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Thanks,
Dinh

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/