lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1287694873-12904-7-git-send-email-cyril@ti.com>
Date:	Thu, 21 Oct 2010 17:01:07 -0400
From:	Cyril Chemparathy <cyril@...com>
To:	davinci-linux-open-source@...ux.davincidsp.com,
	spi-devel-general@...ts.sourceforge.net,
	broonie@...nsource.wolfsonmicro.com, lrg@...mlogic.co.uk,
	dbrownell@...rs.sourceforge.net, grant.likely@...retlab.ca,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	rpurdie@...ys.net
Cc:	Cyril Chemparathy <cyril@...com>
Subject: [PATCH v3 06/12] regulator: add driver for tps6524x regulator

TPS6524X provides three step-down converters and two general-purpose LDO
voltage regulators.  This device is interfaced using SPI.

Acked-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
Signed-off-by: Cyril Chemparathy <cyril@...com>
---
 drivers/regulator/Kconfig              |   10 +
 drivers/regulator/Makefile             |    1 +
 drivers/regulator/tps6524x-regulator.c |  692 ++++++++++++++++++++++++++++++++
 3 files changed, 703 insertions(+), 0 deletions(-)
 create mode 100644 drivers/regulator/tps6524x-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 172951b..7875c2e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -235,5 +235,15 @@ config REGULATOR_TPS6586X
 	help
 	  This driver supports TPS6586X voltage regulator chips.
 
+config REGULATOR_TPS6524X
+	tristate "TI TPS6524X Power regulators"
+	depends on TI_SSP
+	help
+	  This driver supports TPS6524X voltage regulator chips. TPS6524X
+	  provides three step-down converters and two general-purpose LDO
+	  voltage regulators.  This device is interfaced using a customized
+	  serial interface currently supported on the sequencer serial
+	  port controller.
+
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 8285fd8..a8e5bc0 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
new file mode 100644
index 0000000..6d6cc5e
--- /dev/null
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -0,0 +1,692 @@
+/*
+ * Regulator driver for TPS6524x PMIC
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REG_LDO_SET		0x0
+#define LDO_ILIM_MASK		1	/* 0 = 400-800, 1 = 900-1500 */
+#define LDO_VSEL_MASK		0x0f
+#define LDO2_ILIM_SHIFT		12
+#define LDO2_VSEL_SHIFT		4
+#define LDO1_ILIM_SHIFT		8
+#define LDO1_VSEL_SHIFT		0
+
+#define REG_BLOCK_EN		0x1
+#define BLOCK_MASK		1
+#define BLOCK_LDO1_SHIFT	0
+#define BLOCK_LDO2_SHIFT	1
+#define BLOCK_LCD_SHIFT		2
+#define BLOCK_USB_SHIFT		3
+
+#define REG_DCDC_SET		0x2
+#define DCDC_VDCDC_MASK		0x1f
+#define DCDC_VDCDC1_SHIFT	0
+#define DCDC_VDCDC2_SHIFT	5
+#define DCDC_VDCDC3_SHIFT	10
+
+#define REG_DCDC_EN		0x3
+#define DCDCDCDC_EN_MASK	0x1
+#define DCDCDCDC1_EN_SHIFT	0
+#define DCDCDCDC1_PG_MSK	BIT(1)
+#define DCDCDCDC2_EN_SHIFT	2
+#define DCDCDCDC2_PG_MSK	BIT(3)
+#define DCDCDCDC3_EN_SHIFT	4
+#define DCDCDCDC3_PG_MSK	BIT(5)
+
+#define REG_USB			0x4
+#define USB_ILIM_SHIFT		0
+#define USB_ILIM_MASK		0x3
+#define USB_TSD_SHIFT		2
+#define USB_TSD_MASK		0x3
+#define USB_TWARN_SHIFT		4
+#define USB_TWARN_MASK		0x3
+#define USB_IWARN_SD		BIT(6)
+#define USB_FAST_LOOP		BIT(7)
+
+#define REG_ALARM		0x5
+#define ALARM_LDO1		BIT(0)
+#define ALARM_DCDC1		BIT(1)
+#define ALARM_DCDC2		BIT(2)
+#define ALARM_DCDC3		BIT(3)
+#define ALARM_LDO2		BIT(4)
+#define ALARM_USB_WARN		BIT(5)
+#define ALARM_USB_ALARM		BIT(6)
+#define ALARM_LCD		BIT(9)
+#define ALARM_TEMP_WARM		BIT(10)
+#define ALARM_TEMP_HOT		BIT(11)
+#define ALARM_NRST		BIT(14)
+#define ALARM_POWERUP		BIT(15)
+
+#define REG_INT_ENABLE		0x6
+#define INT_LDO1		BIT(0)
+#define INT_DCDC1		BIT(1)
+#define INT_DCDC2		BIT(2)
+#define INT_DCDC3		BIT(3)
+#define INT_LDO2		BIT(4)
+#define INT_USB_WARN		BIT(5)
+#define INT_USB_ALARM		BIT(6)
+#define INT_LCD			BIT(9)
+#define INT_TEMP_WARM		BIT(10)
+#define INT_TEMP_HOT		BIT(11)
+#define INT_GLOBAL_EN		BIT(15)
+
+#define REG_INT_STATUS		0x7
+#define STATUS_LDO1		BIT(0)
+#define STATUS_DCDC1		BIT(1)
+#define STATUS_DCDC2		BIT(2)
+#define STATUS_DCDC3		BIT(3)
+#define STATUS_LDO2		BIT(4)
+#define STATUS_USB_WARN		BIT(5)
+#define STATUS_USB_ALARM	BIT(6)
+#define STATUS_LCD		BIT(9)
+#define STATUS_TEMP_WARM	BIT(10)
+#define STATUS_TEMP_HOT		BIT(11)
+
+#define REG_SOFTWARE_RESET	0xb
+#define REG_WRITE_ENABLE	0xd
+#define REG_REV_ID		0xf
+
+#define N_DCDC			3
+#define N_LDO			2
+#define N_SWITCH		2
+#define N_REGULATORS		(3 /* DCDC */ + \
+				 2 /* LDO */  + \
+				 2 /* switch */)
+
+#define FIXED_ILIMSEL		BIT(0)
+#define FIXED_VOLTAGE		BIT(1)
+
+#define CMD_READ(reg)		((reg) << 6)
+#define CMD_WRITE(reg)		(BIT(5) | (reg) << 6)
+#define STAT_CLK		BIT(3)
+#define STAT_WRITE		BIT(2)
+#define STAT_INVALID		BIT(1)
+#define STAT_WP			BIT(0)
+
+struct field {
+	int		reg;
+	int		shift;
+	int		mask;
+};
+
+struct supply_info {
+	const char	*name;
+	int		n_voltages;
+	const int	*voltages;
+	int		fixed_voltage;
+	int		n_ilimsels;
+	const int	*ilimsels;
+	int		fixed_ilimsel;
+	int		flags;
+	struct field	enable, voltage, ilimsel;
+};
+
+struct tps6524x {
+	struct device		*dev;
+	struct spi_device	*spi;
+	struct mutex		lock;
+	struct regulator_desc	desc[N_REGULATORS];
+	struct regulator_dev	*rdev[N_REGULATORS];
+};
+
+static int __read_reg(struct tps6524x *hw, int reg)
+{
+	int error = 0;
+	u16 cmd = CMD_READ(reg), in;
+	u8 status;
+	struct spi_message m;
+	struct spi_transfer t[3];
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = 2;
+	t[0].bits_per_word = 12;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = &in;
+	t[1].len = 2;
+	t[1].bits_per_word = 16;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = &status;
+	t[2].len = 1;
+	t[2].bits_per_word = 4;
+	spi_message_add_tail(&t[2], &m);
+
+	error = spi_sync(hw->spi, &m);
+	if (error < 0)
+		return error;
+
+	dev_dbg(hw->dev, "read reg %d, data %x, status %x\n",
+		reg, in, status);
+
+	if (!(status & STAT_CLK) || (status & STAT_WRITE))
+		return -EIO;
+
+	if (status & STAT_INVALID)
+		return -EINVAL;
+
+	return in;
+}
+
+static int read_reg(struct tps6524x *hw, int reg)
+{
+	int ret;
+
+	mutex_lock(&hw->lock);
+	ret = __read_reg(hw, reg);
+	mutex_unlock(&hw->lock);
+
+	return ret;
+}
+
+static int __write_reg(struct tps6524x *hw, int reg, int val)
+{
+	int error = 0;
+	u16 cmd = CMD_WRITE(reg), out = val;
+	u8 status;
+	struct spi_message m;
+	struct spi_transfer t[3];
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = 2;
+	t[0].bits_per_word = 12;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = &out;
+	t[1].len = 2;
+	t[1].bits_per_word = 16;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = &status;
+	t[2].len = 1;
+	t[2].bits_per_word = 4;
+	spi_message_add_tail(&t[2], &m);
+
+	error = spi_sync(hw->spi, &m);
+	if (error < 0)
+		return error;
+
+	dev_dbg(hw->dev, "wrote reg %d, data %x, status %x\n",
+		reg, out, status);
+
+	if (!(status & STAT_CLK) || !(status & STAT_WRITE))
+		return -EIO;
+
+	if (status & (STAT_INVALID | STAT_WP))
+		return -EINVAL;
+
+	return error;
+}
+
+static int __rmw_reg(struct tps6524x *hw, int reg, int mask, int val)
+{
+	int ret;
+
+	ret = __read_reg(hw, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~mask;
+	ret |= val;
+
+	ret = __write_reg(hw, reg, ret);
+
+	return (ret < 0) ? ret : 0;
+}
+
+static int rmw_protect(struct tps6524x *hw, int reg, int mask, int val)
+{
+	int ret;
+
+	mutex_lock(&hw->lock);
+
+	ret = __write_reg(hw, REG_WRITE_ENABLE, 1);
+	if (ret) {
+		dev_err(hw->dev, "failed to set write enable\n");
+		goto error;
+	}
+
+	ret = __rmw_reg(hw, reg, mask, val);
+	if (ret)
+		dev_err(hw->dev, "failed to rmw register %d\n", reg);
+
+	ret = __write_reg(hw, REG_WRITE_ENABLE, 0);
+	if (ret) {
+		dev_err(hw->dev, "failed to clear write enable\n");
+		goto error;
+	}
+
+error:
+	mutex_unlock(&hw->lock);
+
+	return ret;
+}
+
+static int read_field(struct tps6524x *hw, const struct field *field)
+{
+	int tmp;
+
+	tmp = read_reg(hw, field->reg);
+	if (tmp < 0)
+		return tmp;
+
+	return (tmp >> field->shift) & field->mask;
+}
+
+static int write_field(struct tps6524x *hw, const struct field *field,
+		       int val)
+{
+	if (val & ~field->mask)
+		return -EOVERFLOW;
+
+	return rmw_protect(hw, field->reg,
+				    field->mask << field->shift,
+				    val << field->shift);
+}
+
+static const int dcdc1_voltages[] = {
+	 800000,  825000,  850000,  875000,
+	 900000,  925000,  950000,  975000,
+	1000000, 1025000, 1050000, 1075000,
+	1100000, 1125000, 1150000, 1175000,
+	1200000, 1225000, 1250000, 1275000,
+	1300000, 1325000, 1350000, 1375000,
+	1400000, 1425000, 1450000, 1475000,
+	1500000, 1525000, 1550000, 1575000,
+};
+
+static const int dcdc2_voltages[] = {
+	1400000, 1450000, 1500000, 1550000,
+	1600000, 1650000, 1700000, 1750000,
+	1800000, 1850000, 1900000, 1950000,
+	2000000, 2050000, 2100000, 2150000,
+	2200000, 2250000, 2300000, 2350000,
+	2400000, 2450000, 2500000, 2550000,
+	2600000, 2650000, 2700000, 2750000,
+	2800000, 2850000, 2900000, 2950000,
+};
+
+static const int dcdc3_voltages[] = {
+	2400000, 2450000, 2500000, 2550000, 2600000,
+	2650000, 2700000, 2750000, 2800000, 2850000,
+	2900000, 2950000, 3000000, 3050000, 3100000,
+	3150000, 3200000, 3250000, 3300000, 3350000,
+	3400000, 3450000, 3500000, 3550000, 3600000,
+};
+
+static const int ldo1_voltages[] = {
+	4300000, 4350000, 4400000, 4450000,
+	4500000, 4550000, 4600000, 4650000,
+	4700000, 4750000, 4800000, 4850000,
+	4900000, 4950000, 5000000, 5050000,
+};
+
+static const int ldo2_voltages[] = {
+	1100000, 1150000, 1200000, 1250000,
+	1300000, 1700000, 1750000, 1800000,
+	1850000, 1900000, 3150000, 3200000,
+	3250000, 3300000, 3350000, 3400000,
+};
+
+static const int ldo_ilimsel[] = {
+	400000, 1500000
+};
+
+static const int usb_ilimsel[] = {
+	200000, 400000, 800000, 1000000
+};
+
+#define __MK_FIELD(_reg, _mask, _shift) \
+	{ .reg = (_reg), .mask = (_mask), .shift = (_shift), }
+
+static const struct supply_info supply_info[N_REGULATORS] = {
+	{
+		.name		= "DCDC1",
+		.flags		= FIXED_ILIMSEL,
+		.n_voltages	= ARRAY_SIZE(dcdc1_voltages),
+		.voltages	= dcdc1_voltages,
+		.fixed_ilimsel	= 2400000,
+		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+					     DCDCDCDC1_EN_SHIFT),
+		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+					     DCDC_VDCDC1_SHIFT),
+	},
+	{
+		.name		= "DCDC2",
+		.flags		= FIXED_ILIMSEL,
+		.n_voltages	= ARRAY_SIZE(dcdc2_voltages),
+		.voltages	= dcdc2_voltages,
+		.fixed_ilimsel	= 1200000,
+		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+					     DCDCDCDC2_EN_SHIFT),
+		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+					     DCDC_VDCDC2_SHIFT),
+	},
+	{
+		.name		= "DCDC3",
+		.flags		= FIXED_ILIMSEL,
+		.n_voltages	= ARRAY_SIZE(dcdc3_voltages),
+		.voltages	= dcdc3_voltages,
+		.fixed_ilimsel	= 1200000,
+		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+					DCDCDCDC3_EN_SHIFT),
+		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+					     DCDC_VDCDC3_SHIFT),
+	},
+	{
+		.name		= "LDO1",
+		.n_voltages	= ARRAY_SIZE(ldo1_voltages),
+		.voltages	= ldo1_voltages,
+		.n_ilimsels	= ARRAY_SIZE(ldo_ilimsel),
+		.ilimsels	= ldo_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_LDO1_SHIFT),
+		.voltage	= __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK,
+					     LDO1_VSEL_SHIFT),
+		.ilimsel	= __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK,
+					     LDO1_ILIM_SHIFT),
+	},
+	{
+		.name		= "LDO2",
+		.n_voltages	= ARRAY_SIZE(ldo2_voltages),
+		.voltages	= ldo2_voltages,
+		.n_ilimsels	= ARRAY_SIZE(ldo_ilimsel),
+		.ilimsels	= ldo_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_LDO2_SHIFT),
+		.voltage	= __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK,
+					     LDO2_VSEL_SHIFT),
+		.ilimsel	= __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK,
+					     LDO2_ILIM_SHIFT),
+	},
+	{
+		.name		= "USB",
+		.flags		= FIXED_VOLTAGE,
+		.fixed_voltage	= 5000000,
+		.n_ilimsels	= ARRAY_SIZE(usb_ilimsel),
+		.ilimsels	= usb_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_USB_SHIFT),
+		.ilimsel	= __MK_FIELD(REG_USB, USB_ILIM_MASK,
+					     USB_ILIM_SHIFT),
+	},
+	{
+		.name		= "LCD",
+		.flags		= FIXED_VOLTAGE | FIXED_ILIMSEL,
+		.fixed_voltage	= 5000000,
+		.fixed_ilimsel	=  400000,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_LCD_SHIFT),
+	},
+};
+
+static int list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->flags & FIXED_VOLTAGE)
+		return selector ? -EINVAL : info->fixed_voltage;
+
+	if (selector < 0 || selector >= info->n_voltages)
+		return -EINVAL;
+
+	return info->voltages[selector];
+}
+
+static int set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int i;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->flags & FIXED_VOLTAGE)
+		return -EINVAL;
+
+	for (i = 0; i < info->n_voltages; i++)
+		if (min_uV <= info->voltages[i] &&
+		    max_uV >= info->voltages[i])
+			break;
+
+	if (i >= info->n_voltages)
+		return -EINVAL;
+
+	return write_field(hw, &info->voltage, i);
+}
+
+static int get_voltage(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int ret;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->flags & FIXED_VOLTAGE)
+		return info->fixed_voltage;
+
+	ret = read_field(hw, &info->voltage);
+	if (ret < 0)
+		return ret;
+	if (WARN_ON(ret >= info->n_voltages))
+		return -EIO;
+
+	return info->voltages[ret];
+}
+
+static int set_current_limit(struct regulator_dev *rdev, int min_uA,
+			     int max_uA)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int i;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->flags & FIXED_ILIMSEL)
+		return -EINVAL;
+
+	for (i = 0; i < info->n_ilimsels; i++)
+		if (min_uA <= info->ilimsels[i] &&
+		    max_uA >= info->ilimsels[i])
+			break;
+
+	if (i >= info->n_ilimsels)
+		return -EINVAL;
+
+	return write_field(hw, &info->ilimsel, i);
+}
+
+static int get_current_limit(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int ret;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->flags & FIXED_ILIMSEL)
+		return info->fixed_ilimsel;
+
+	ret = read_field(hw, &info->ilimsel);
+	if (ret < 0)
+		return ret;
+	if (WARN_ON(ret >= info->n_ilimsels))
+		return -EIO;
+
+	return info->ilimsels[ret];
+}
+
+static int enable_supply(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	return write_field(hw, &info->enable, 1);
+}
+
+static int disable_supply(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	return write_field(hw, &info->enable, 0);
+}
+
+static int is_supply_enabled(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	return read_field(hw, &info->enable);
+}
+
+static struct regulator_ops regulator_ops = {
+	.is_enabled		= is_supply_enabled,
+	.enable			= enable_supply,
+	.disable		= disable_supply,
+	.get_voltage		= get_voltage,
+	.set_voltage		= set_voltage,
+	.list_voltage		= list_voltage,
+	.set_current_limit	= set_current_limit,
+	.get_current_limit	= get_current_limit,
+};
+
+static int __devexit pmic_remove(struct spi_device *spi)
+{
+	struct tps6524x *hw = spi_get_drvdata(spi);
+	int i;
+
+	if (!hw)
+		return 0;
+	for (i = 0; i < N_REGULATORS; i++) {
+		if (hw->rdev[i])
+			regulator_unregister(hw->rdev[i]);
+		hw->rdev[i] = NULL;
+	}
+	spi_set_drvdata(spi, NULL);
+	kfree(hw);
+	return 0;
+}
+
+static int __devinit pmic_probe(struct spi_device *spi)
+{
+	struct tps6524x *hw;
+	struct device *dev = &spi->dev;
+	const struct supply_info *info = supply_info;
+	struct regulator_init_data *init_data;
+	int ret = 0, i;
+
+	init_data = dev->platform_data;
+	if (!init_data) {
+		dev_err(dev, "could not find regulator platform data\n");
+		return -EINVAL;
+	}
+
+	hw = kzalloc(sizeof(struct tps6524x), GFP_KERNEL);
+	if (!hw) {
+		dev_err(dev, "cannot allocate regulator private data\n");
+		return -ENOMEM;
+	}
+	spi_set_drvdata(spi, hw);
+
+	memset(hw, 0, sizeof(struct tps6524x));
+	hw->dev = dev;
+	hw->spi = spi_dev_get(spi);
+	mutex_init(&hw->lock);
+
+	for (i = 0; i < N_REGULATORS; i++, info++, init_data++) {
+		hw->desc[i].name	= info->name;
+		hw->desc[i].id		= i;
+		hw->desc[i].n_voltages	= info->n_voltages;
+		hw->desc[i].ops		= &regulator_ops;
+		hw->desc[i].type	= REGULATOR_VOLTAGE;
+		hw->desc[i].owner	= THIS_MODULE;
+
+		if (info->flags & FIXED_VOLTAGE)
+			hw->desc[i].n_voltages = 1;
+
+		hw->rdev[i] = regulator_register(&hw->desc[i], dev,
+						 init_data, hw);
+		if (IS_ERR(hw->rdev[i])) {
+			ret = PTR_ERR(hw->rdev[i]);
+			hw->rdev[i] = NULL;
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	pmic_remove(spi);
+	return ret;
+}
+
+static struct spi_driver pmic_driver = {
+	.probe		= pmic_probe,
+	.remove		= __devexit_p(pmic_remove),
+	.driver		= {
+		.name	= "tps6524x",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init pmic_driver_init(void)
+{
+	return spi_register_driver(&pmic_driver);
+}
+subsys_initcall_sync(pmic_driver_init);
+
+static void __exit pmic_driver_exit(void)
+{
+	spi_unregister_driver(&pmic_driver);
+}
+module_exit(pmic_driver_exit);
+
+MODULE_DESCRIPTION("TPS6524X PMIC Driver");
+MODULE_AUTHOR("Cyril Chemparathy");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:tps6524x");
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ