[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1287694873-12904-1-git-send-email-cyril@ti.com>
Date: Thu, 21 Oct 2010 17:01:01 -0400
From: Cyril Chemparathy <cyril@...com>
To: davinci-linux-open-source@...ux.davincidsp.com,
spi-devel-general@...ts.sourceforge.net,
broonie@...nsource.wolfsonmicro.com, lrg@...mlogic.co.uk,
dbrownell@...rs.sourceforge.net, grant.likely@...retlab.ca,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
rpurdie@...ys.net
Cc: Cyril Chemparathy <cyril@...com>
Subject: [PATCH v3 00/12] tnetv107x ssp driver stack
TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port
device. It has a built-in programmable execution engine that can be programmed
to operate as almost any serial bus (I2C, SPI, EasyScale, and others).
This patch series implements a driver stack that looks like the following:
+--------+
| eeprom | . . .
+--------+
+-----------+ +--------------+ +---------+
| regulator | . . . | i2c-gpio | | 1-wire | . . .
+-----------+ +--------------+ +---------+
+----------------------+ +--------------------------------+
| ssp-spi | | ssp-gpio |
+----------------------+ +--------------------------------+
+----------------------------------------------------------+
| ssp |
+----------------------------------------------------------+
Changes between v2 and v3 of this series:
- Minor cleanups in Kconfig and Makefile ordering
Changes between v1 and v2 of this series:
- Replaced open()/close() semantics with dynamic platform_device
registration on SSP probe.
- Removed user-land interface to regulator registers
- More sensible regulator constraints
- Other minor cleanups
Cyril Chemparathy (12):
misc: add driver for sequencer serial port
davinci: add tnetv107x ssp platform device
davinci: add ssp config for tnetv107x evm board
spi: add ti-ssp spi master driver
davinci: add spi devices on tnetv107x evm
regulator: add driver for tps6524x regulator
davinci: add tnetv107x evm regulators
gpio: add ti-ssp virtual gpio driver
davinci: add tnetv107x evm ti-ssp gpio device
backlight: add support for tps6116x controller
davinci: add tnetv107x evm backlight device
davinci: add tnetv107x evm i2c eeprom device
arch/arm/mach-davinci/board-tnetv107x-evm.c | 199 +++++++
arch/arm/mach-davinci/devices-tnetv107x.c | 25 +
arch/arm/mach-davinci/include/mach/ti_ssp.h | 98 ++++
arch/arm/mach-davinci/include/mach/tnetv107x.h | 2 +
arch/arm/mach-davinci/tnetv107x.c | 2 +-
drivers/gpio/Kconfig | 10 +
drivers/gpio/Makefile | 1 +
drivers/gpio/ti-ssp-gpio.c | 200 +++++++
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/ti_ssp.c | 436 +++++++++++++++
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/tps6524x-regulator.c | 692 ++++++++++++++++++++++++
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi_ti_ssp.c | 397 ++++++++++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 2 +-
drivers/video/backlight/tps6116x.c | 340 ++++++++++++
20 files changed, 2440 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-davinci/include/mach/ti_ssp.h
create mode 100644 drivers/gpio/ti-ssp-gpio.c
create mode 100644 drivers/misc/ti_ssp.c
create mode 100644 drivers/regulator/tps6524x-regulator.c
create mode 100644 drivers/spi/spi_ti_ssp.c
create mode 100644 drivers/video/backlight/tps6116x.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists