Date:	Fri, 22 Oct 2010 12:40:32 +0200
From:	Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@...ricsson.com>
To:	linus.walleij@...ricsson.com, linux-bluetooth@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 8/9] Bluetooth: Add support for the ST-Ericsson CG2900.

This patch adds support for the ST-Ericsson CG2900 Connectivity
Combo controller.
This patch registers to the Bluetooth stack and, when opened, it
registers to the Bluetooth channels in the CG2900 MFD driver.

Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@...ricsson.com>
---
 drivers/bluetooth/Kconfig    |    7 +
 drivers/bluetooth/Makefile   |    1 +
 drivers/bluetooth/btcg2900.c |  925 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 933 insertions(+), 0 deletions(-)
 create mode 100644 drivers/bluetooth/btcg2900.c

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 02deef4..9ca8d69 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -219,4 +219,11 @@ config BT_ATH3K
 	  Say Y here to compile support for "Atheros firmware download driver"
 	  into the kernel or say M to compile it as module (ath3k).

+config BT_CG2900
+	tristate "ST-Ericsson CG2900 driver"
+	depends on MFD_CG2900 && BT
+	help
+	  Select if ST-Ericsson CG2900 Connectivity controller shall be used as
+	  Bluetooth controller for BlueZ.
+
 endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 71bdf13..1f8ce2d 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o

 obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
+obj-$(CONFIG_BT_CG2900)		+= btcg2900.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o

diff --git a/drivers/bluetooth/btcg2900.c b/drivers/bluetooth/btcg2900.c
new file mode 100644
index 0000000..11d6518
--- /dev/null
+++ b/drivers/bluetooth/btcg2900.c
@@ -0,0 +1,925 @@
+/*
+ * Bluetooth driver for ST-Ericsson CG2900 connectivity controller.
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Authors:
+ * Par-Gunnar Hjalmdahl (par-gunnar.p.hjalmdahl@...ricsson.com)
+ * Henrik Possung (henrik.possung@...ricsson.com)
+ * Josef Kindberg (josef.kindberg@...ricsson.com)
+ * Dariusz Szymszak (dariusz.xd.szymczak@...ricsson.com)
+ * Kjell Andersson (kjell.k.andersson@...ricsson.com)
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <asm/byteorder.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/cg2900.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+#include <net/bluetooth/hci_core.h>
+
+#define BT_VS_BT_ENABLE			0xFF10
+
+#define VS_BT_DISABLE			0x00
+#define VS_BT_ENABLE			0x01
+
+#define BT_HEADER_LENGTH		0x03
+
+#define STLC2690_HCI_REV		0x0600
+#define CG2900_PG1_HCI_REV		0x0101
+#define CG2900_PG2_HCI_REV		0x0200
+#define CG2900_PG1_SPECIAL_HCI_REV	0x0700
+
+#define NAME				"BTCG2900 "
+
+/* Wait for 5 seconds for a response to our requests */
+#define RESP_TIMEOUT			5000
+
+/* Bluetooth error codes */
+#define HCI_ERR_NO_ERROR		0x00
+#define HCI_ERR_CMD_DISALLOWED		0x0C
+
+/**
+ * enum reset_state - RESET-states of the HCI driver.
+ *
+ * @RESET_IDLE:		No reset in progress.
+ * @RESET_ACTIVATED:	Reset in progress.
+ * @RESET_UNREGISTERED:	hdev is unregistered.
+ */
+
+enum reset_state {
+	RESET_IDLE,
+	RESET_ACTIVATED,
+	RESET_UNREGISTERED
+};
+
+/**
+ * enum enable_state - ENABLE-states of the HCI driver.
+ *
+ * @ENABLE_IDLE:			The HCI driver is loaded but not opened.
+ * @ENABLE_WAITING_BT_ENABLED_CC:	The HCI driver is waiting for a command
+ *					complete event from the BT chip as a
+ *					response to a BT Enable (true) command.
+ * @ENABLE_BT_ENABLED:			The BT chip is enabled.
+ * @ENABLE_WAITING_BT_DISABLED_CC:	The HCI driver is waiting for a command
+ *					complete event from the BT chip as a
+ *					response to a BT Enable (false) command.
+ * @ENABLE_BT_DISABLED:			The BT chip is disabled.
+ * @ENABLE_BT_ERROR:			The HCI driver is in a bad state, some
+ *					thing has failed and is not expected to
+ *					work properly.
+ */
+enum enable_state {
+	ENABLE_IDLE,
+	ENABLE_WAITING_BT_ENABLED_CC,
+	ENABLE_BT_ENABLED,
+	ENABLE_WAITING_BT_DISABLED_CC,
+	ENABLE_BT_DISABLED,
+	ENABLE_BT_ERROR
+};
+
+/**
+ * struct btcg2900_info - Specifies HCI driver private data.
+ *
+ * This type specifies CG2900 HCI driver private data.
+ *
+ * @bt_cmd:		Device structure for BT command channel.
+ * @bt_evt:		Device structure for BT event channel.
+ * @bt_acl:		Device structure for BT ACL channel.
+ * @pdev:		Device structure for platform device.
+ * @hdev:		Device structure for HCI device.
+ * @reset_state:	Device enum for HCI driver reset state.
+ * @enable_state:	Device enum for HCI driver BT enable state.
+ */
+struct btcg2900_info {
+	struct cg2900_device	*bt_cmd;
+	struct cg2900_device	*bt_evt;
+	struct cg2900_device	*bt_acl;
+	struct platform_device	*pdev;
+	struct hci_dev		*hdev;
+	enum reset_state	reset_state;
+	enum enable_state	enable_state;
+};
+
+/**
+ * struct dev_info - Specifies private data used when receiving
callbacks from CG2900 driver.
+ *
+ * @hdev:		Device structure for HCI device.
+ * @hci_data_type:	Type of data according to BlueZ.
+ */
+struct dev_info {
+	struct hci_dev	*hdev;
+	u8		hci_data_type;
+};
+
+/**
+ * struct vs_bt_enable_cmd - Specifies HCI VS Bluetooth_Enable command.
+ *
+ * @op_code:	HCI command op code.
+ * @len:	Parameter length of command.
+ * @enable:	0 for disable BT, 1 for enable BT.
+ */
+struct vs_bt_enable_cmd {
+	__le16	op_code;
+	u8	len;
+	u8	enable;
+} __attribute__((packed));
+
+static struct btcg2900_info *btcg2900_info;
+
+/*
+ * hci_wait_queue - Main Wait Queue in HCI driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(hci_wait_queue);
+
+/* Internal function declarations */
+static int register_bluetooth(void);
+
+/* Internal functions */
+
+/**
+ * get_bt_enable_cmd() - Get HCI BT enable command.
+ * @bt_enable:	true if Bluetooth IP shall be enabled, false otherwise.
+ *
+ * Returns:
+ *   NULL if no command shall be sent,
+ *   sk_buffer with command otherwise.
+ */
+struct sk_buff *get_bt_enable_cmd(bool bt_enable)
+{
+	struct sk_buff *skb;
+	struct vs_bt_enable_cmd *cmd;
+	struct cg2900_rev_data rev_data;
+
+	if (!cg2900_get_local_revision(&rev_data)) {
+		BT_ERR(NAME "Couldn't get revision");
+		return NULL;
+	}
+
+	/* If connected chip does not support the command return NULL */
+	if (CG2900_PG1_SPECIAL_HCI_REV != rev_data.revision &&
+	    CG2900_PG1_HCI_REV != rev_data.revision &&
+	    CG2900_PG2_HCI_REV != rev_data.revision)
+		return NULL;
+
+	/* CG2900 used */
+	skb = cg2900_alloc_skb(sizeof(*cmd), GFP_KERNEL);
+	if (!skb) {
+		BT_ERR(NAME "Could not allocate skb");
+		return NULL;
+	}
+
+	cmd = (struct vs_bt_enable_cmd *)skb_put(skb, sizeof(*cmd));
+	cmd->op_code = cpu_to_le16(BT_VS_BT_ENABLE);
+	cmd->len = sizeof(*cmd) - BT_HEADER_LENGTH;
+	if (bt_enable)
+		cmd->enable = VS_BT_ENABLE;
+	else
+		cmd->enable = VS_BT_DISABLE;
+
+	return skb;
+}
+
+/**
+ * remove_bt_users() - Unregister and remove any existing BT users.
+ * @info:	HCI driver info structure.
+ */
+static void remove_bt_users(struct btcg2900_info *info)
+{
+	if (info->bt_cmd) {
+		kfree(info->bt_cmd->user_data);
+		info->bt_cmd->user_data = NULL;
+		cg2900_deregister_user(info->bt_cmd);
+		info->bt_cmd = NULL;
+	}
+
+	if (info->bt_evt) {
+		kfree(info->bt_evt->user_data);
+		info->bt_evt->user_data = NULL;
+		cg2900_deregister_user(info->bt_evt);
+		info->bt_evt = NULL;
+	}
+
+	if (info->bt_acl) {
+		kfree(info->bt_acl->user_data);
+		info->bt_acl->user_data = NULL;
+		cg2900_deregister_user(info->bt_acl);
+		info->bt_acl = NULL;
+	}
+}
+
+/**
+ * hci_read_cb() - Callback for handling data received from CG2900 driver.
+ * @dev:	Device receiving data.
+ * @skb:	Buffer with data coming from device.
+ */
+static void hci_read_cb(struct cg2900_device *dev, struct sk_buff *skb)
+{
+	int err = 0;
+	struct dev_info *dev_info;
+	struct hci_event_hdr *evt;
+	struct hci_ev_cmd_complete *cmd_complete;
+	struct hci_ev_cmd_status *cmd_status;
+	u8 status;
+
+	if (!skb) {
+		BT_ERR(NAME "NULL supplied for skb");
+		return;
+	}
+
+	if (!dev) {
+		BT_ERR(NAME "dev == NULL");
+		goto fin_free_skb;
+	}
+
+	dev_info = (struct dev_info *)dev->user_data;
+
+	if (!dev_info) {
+		BT_ERR(NAME "dev_info == NULL");
+		goto fin_free_skb;
+	}
+
+	evt = (struct hci_event_hdr *)skb->data;
+	cmd_complete = (struct hci_ev_cmd_complete *)(skb->data + sizeof(*evt));
+	cmd_status = (struct hci_ev_cmd_status *)(skb->data + sizeof(*evt));
+
+	/*
+	 * Check if HCI Driver it self is expecting a Command Complete packet
+	 * from the chip after a BT Enable command.
+	 */
+	if ((btcg2900_info->enable_state == ENABLE_WAITING_BT_ENABLED_CC ||
+	     btcg2900_info->enable_state == ENABLE_WAITING_BT_DISABLED_CC) &&
+	    btcg2900_info->bt_evt->h4_channel == dev->h4_channel &&
+	    evt->evt == HCI_EV_CMD_COMPLETE &&
+	    le16_to_cpu(cmd_complete->opcode) == BT_VS_BT_ENABLE) {
+		/*
+		 * This is the command complete event for
+		 * the HCI_Cmd_VS_Bluetooth_Enable.
+		 * Check result and update state.
+		 *
+		 * The BT chip is enabled/disabled. Either it was enabled/
+		 * disabled now (status NO_ERROR) or it was already enabled/
+		 * disabled (assuming status CMD_DISALLOWED is already enabled/
+		 * disabled).
+		 */
+		status = *(skb->data + sizeof(*evt) + sizeof(*cmd_complete));
+		if (status != HCI_ERR_NO_ERROR &&
+		    status != HCI_ERR_CMD_DISALLOWED) {
+			BT_ERR(NAME "Could not enable/disable BT core (0x%X)",
+				   status);
+			BT_DBG("New enable_state: ENABLE_BT_ERROR");
+			btcg2900_info->enable_state = ENABLE_BT_ERROR;
+			goto fin_free_skb;
+		}
+
+		if (btcg2900_info->enable_state ==
+				ENABLE_WAITING_BT_ENABLED_CC) {
+			BT_DBG("New enable_state: ENABLE_BT_ENABLED");
+			btcg2900_info->enable_state = ENABLE_BT_ENABLED;
+			BT_INFO("CG2900 BT core is enabled");
+		} else {
+			BT_DBG("New enable_state: ENABLE_BT_DISABLED");
+			btcg2900_info->enable_state = ENABLE_BT_DISABLED;
+			BT_INFO("CG2900 BT core is disabled");
+		}
+
+		/* Wake up whom ever is waiting for this result. */
+		wake_up_interruptible(&hci_wait_queue);
+		goto fin_free_skb;
+	} else if ((btcg2900_info->enable_state ==
+			ENABLE_WAITING_BT_DISABLED_CC ||
+		    btcg2900_info->enable_state ==
+			ENABLE_WAITING_BT_ENABLED_CC) &&
+		   btcg2900_info->bt_evt->h4_channel == dev->h4_channel &&
+		   evt->evt == HCI_EV_CMD_STATUS &&
+		   le16_to_cpu(cmd_status->opcode) == BT_VS_BT_ENABLE) {
+		/*
+		 * Clear the status events since the Bluez is not expecting
+		 * them.
+		 */
+		BT_DBG("HCI Driver received Command Status (BT enable): 0x%X",
+		       cmd_status->status);
+		/*
+		 * This is the command status event for
+		 * the HCI_Cmd_VS_Bluetooth_Enable.
+		 * Just free the packet.
+		 */
+		goto fin_free_skb;
+	} else {
+		bt_cb(skb)->pkt_type = dev_info->hci_data_type;
+		skb->dev = (struct net_device *)dev_info->hdev;
+		/* Update BlueZ stats */
+		dev_info->hdev->stat.byte_rx += skb->len;
+		if (bt_cb(skb)->pkt_type == HCI_ACLDATA_PKT)
+			dev_info->hdev->stat.acl_rx++;
+		else
+			dev_info->hdev->stat.evt_rx++;
+
+		BT_DBG("Data receive %d bytes", skb->len);
+
+		/* Provide BlueZ with received frame*/
+		err = hci_recv_frame(skb);
+		/* If err, skb have been freed in hci_recv_frame() */
+		if (err)
+			BT_ERR(NAME "Failed in supplying packet to Bluetooth"
+			       " stack (%d)", err);
+	}
+
+	return;
+
+fin_free_skb:
+	kfree_skb(skb);
+}
+
+/**
+ * hci_reset_cb() - Callback for handling reset from CG2900 driver.
+ * @dev:	CPD device resetting.
+ */
+static void hci_reset_cb(struct cg2900_device *dev)
+{
+	int err;
+	struct hci_dev *hdev;
+	struct dev_info *dev_info;
+	struct btcg2900_info *info;
+
+	BT_INFO(NAME "hci_reset_cb");
+
+	if (!dev) {
+		BT_ERR(NAME "NULL supplied for dev");
+		return;
+	}
+
+	dev_info = (struct dev_info *)dev->user_data;
+	if (!dev_info) {
+		BT_ERR(NAME "NULL supplied for dev_info");
+		return;
+	}
+
+	hdev = dev_info->hdev;
+	if (!hdev) {
+		BT_ERR(NAME "NULL supplied for hdev");
+		return;
+	}
+
+	info = (struct btcg2900_info *)hdev->driver_data;
+	if (!info) {
+		BT_ERR(NAME "NULL supplied for driver_data");
+		return;
+	}
+
+	switch (dev_info->hci_data_type) {
+
+	case HCI_EVENT_PKT:
+		info->bt_evt = NULL;
+		break;
+
+	case HCI_COMMAND_PKT:
+		info->bt_cmd = NULL;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		info->bt_acl = NULL;
+		break;
+
+	default:
+		BT_ERR(NAME "Unknown HCI data type:%d",
+		       dev_info->hci_data_type);
+		return;
+	}
+
+	BT_DBG("New reset_state: RESET_ACTIVATED");
+	btcg2900_info->reset_state = RESET_ACTIVATED;
+
+	/*
+	 * Free userdata as device info structure will be freed by CG2900
+	 * when this callback returns.
+	 */
+	kfree(dev->user_data);
+	dev->user_data = NULL;
+
+	/*
+	 * Continue to deregister hdev if all channels has been reset else
+	 * return.
+	 */
+	if (info->bt_evt || info->bt_cmd || info->bt_acl)
+		return;
+
+	/*
+	 * Deregister HCI device. Close and Destruct functions should
+	 * in turn be called by BlueZ.
+	 */
+	BT_DBG("Deregister HCI device");
+	err = hci_unregister_dev(hdev);
+	if (err)
+		BT_ERR(NAME "Can not deregister HCI device! (%d)", err);
+		/*
+		 * Now we are in trouble. Try to register a new hdev
+		 * anyway even though this will cost some memory.
+		 */
+
+	wait_event_interruptible_timeout(hci_wait_queue,
+			(RESET_UNREGISTERED == btcg2900_info->reset_state),
+			msecs_to_jiffies(RESP_TIMEOUT));
+	if (RESET_UNREGISTERED != btcg2900_info->reset_state)
+		/*
+		 * Now we are in trouble. Try to register a new hdev
+		 * anyway even though this will cost some memory.
+		 */
+		BT_ERR(NAME "Timeout expired. Could not deregister HCI device");
+
+	/* Init and register hdev */
+	BT_DBG("Register HCI device");
+	err = register_bluetooth();
+	if (err)
+		BT_ERR(NAME "HCI Device registration error (%d).", err);
+}
+
+/*
+ * struct cg2900_cb - Specifies callback structure for CG2900 user.
+ *
+ * @read_cb:	Callback function called when data is received from
+ *		the controller.
+ * @reset_cb:	Callback function called when the controller has been reset.
+ */
+static struct cg2900_callbacks cg2900_cb = {
+	.read_cb = hci_read_cb,
+	.reset_cb = hci_reset_cb
+};
+
+/**
+ * btcg2900_open() - Open HCI interface.
+ * @hdev:	HCI device being opened.
+ *
+ * BlueZ callback function for opening HCI interface to device.
+ *
+ * Returns:
+ *   0 if there is no error.
+ *   -EINVAL if NULL pointer is supplied.
+ *   -EOPNOTSUPP if supplied packet type is not supported.
+ *   -EBUSY if device is already opened.
+ *   -EACCES if opening of channels failed.
+ */
+static int btcg2900_open(struct hci_dev *hdev)
+{
+	struct btcg2900_info *info;
+	struct dev_info *dev_info;
+	struct sk_buff *enable_cmd;
+	int err;
+
+	BT_INFO("Open ST-Ericsson CG2900 driver");
+
+	if (!hdev) {
+		BT_ERR(NAME "NULL supplied for hdev");
+		return -EINVAL;
+	}
+
+	info = (struct btcg2900_info *)hdev->driver_data;
+	if (!info) {
+		BT_ERR(NAME "NULL supplied for driver_data");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(HCI_RUNNING, &(hdev->flags))) {
+		BT_ERR(NAME "Device already opened!");
+		return -EBUSY;
+	}
+
+	if (!(info->bt_cmd)) {
+		info->bt_cmd = cg2900_register_user(CG2900_BT_CMD,
+						     &cg2900_cb);
+		if (info->bt_cmd) {
+			dev_info = kmalloc(sizeof(*dev_info), GFP_KERNEL);
+			if (dev_info) {
+				dev_info->hdev = hdev;
+				dev_info->hci_data_type = HCI_COMMAND_PKT;
+			}
+			info->bt_cmd->user_data = dev_info;
+		} else {
+			BT_ERR("Couldn't register CG2900_BT_CMD to CG2900");
+			err = -EACCES;
+			goto handle_error;
+		}
+	}
+
+	if (!(info->bt_evt)) {
+		info->bt_evt = cg2900_register_user(CG2900_BT_EVT,
+						     &cg2900_cb);
+		if (info->bt_evt) {
+			dev_info = kmalloc(sizeof(*dev_info), GFP_KERNEL);
+			if (dev_info) {
+				dev_info->hdev = hdev;
+				dev_info->hci_data_type = HCI_EVENT_PKT;
+			}
+			info->bt_evt->user_data = dev_info;
+		} else {
+			BT_ERR("Couldn't register CG2900_BT_EVT to CG2900");
+			err = -EACCES;
+			goto handle_error;
+		}
+	}
+
+	if (!(info->bt_acl)) {
+		info->bt_acl = cg2900_register_user(CG2900_BT_ACL,
+						     &cg2900_cb);
+		if (info->bt_acl) {
+			dev_info = kmalloc(sizeof(*dev_info), GFP_KERNEL);
+			if (dev_info) {
+				dev_info->hdev = hdev;
+				dev_info->hci_data_type = HCI_ACLDATA_PKT;
+			}
+			info->bt_acl->user_data = dev_info;
+		} else {
+			BT_ERR("Couldn't register CG2900_BT_ACL to CG2900");
+			err = -EACCES;
+			goto handle_error;
+		}
+	}
+
+	if (info->reset_state == RESET_ACTIVATED) {
+		BT_DBG("New reset_state: RESET_IDLE");
+		btcg2900_info->reset_state = RESET_IDLE;
+	}
+
+	/*
+	 * Call function that returns the chip dependent vs_bt_enable(true)
+	 * HCI command.
+	 * If NULL is returned, then no bt_enable command should be sent to the
+	 * chip.
+	 */
+	enable_cmd = get_bt_enable_cmd(true);
+	if (!enable_cmd) {
+		/* The chip is enabled by default */
+		BT_DBG("New enable_state: ENABLE_BT_ENABLED");
+		btcg2900_info->enable_state = ENABLE_BT_ENABLED;
+		return 0;
+	}
+
+	/* Set the HCI state before sending command to chip. */
+	BT_DBG("New enable_state: ENABLE_WAITING_BT_ENABLED_CC");
+	btcg2900_info->enable_state = ENABLE_WAITING_BT_ENABLED_CC;
+
+	/* Send command to chip */
+	cg2900_write(info->bt_cmd, enable_cmd);
+
+	/*
+	 * Wait for callback to receive command complete and then wake us up
+	 * again.
+	 */
+	wait_event_interruptible_timeout(hci_wait_queue,
+				(info->enable_state == ENABLE_BT_ENABLED),
+				msecs_to_jiffies(RESP_TIMEOUT));
+	/* Check the current state to se that it worked. */
+	if (info->enable_state != ENABLE_BT_ENABLED) {
+		BT_ERR("Could not enable CG2900 BT core (%d)",
+		       info->enable_state);
+		err = -EACCES;
+		BT_DBG("New enable_state: ENABLE_BT_DISABLED");
+		btcg2900_info->enable_state = ENABLE_BT_DISABLED;
+		goto handle_error;
+	}
+
+	return 0;
+
+handle_error:
+	remove_bt_users(info);
+	clear_bit(HCI_RUNNING, &(hdev->flags));
+	return err;
+
+}
+
+/**
+ * btcg2900_close() - Close HCI interface.
+ * @hdev:	HCI device being closed.
+ *
+ * BlueZ callback function for closing HCI interface.
+ * It flushes the interface first.
+ *
+ * Returns:
+ *   0 if there is no error.
+ *   -EINVAL if NULL pointer is supplied.
+ *   -EOPNOTSUPP if supplied packet type is not supported.
+ *   -EBUSY if device is not opened.
+ */
+static int btcg2900_close(struct hci_dev *hdev)
+{
+	struct btcg2900_info *info = NULL;
+	struct sk_buff *enable_cmd;
+
+	BT_DBG("btcg2900_close");
+
+	if (!hdev) {
+		BT_ERR(NAME "NULL supplied for hdev");
+		return -EINVAL;
+	}
+
+	info = (struct btcg2900_info *)hdev->driver_data;
+	if (!info) {
+		BT_ERR(NAME "NULL supplied for driver_data");
+		return -EINVAL;
+	}
+
+	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) {
+		BT_ERR(NAME "Device already closed!");
+		return -EBUSY;
+	}
+
+	/* Do not do this if there is an reset ongoing */
+	if (btcg2900_info->reset_state == RESET_ACTIVATED)
+		goto remove_users;
+
+	/*
+	 * Get the chip dependent BT Enable HCI command. The command parameter
+	 * shall be set to false to disable the BT core.
+	 * If NULL is returned, then no BT Enable command should be sent to the
+	 * chip.
+	 */
+	enable_cmd = get_bt_enable_cmd(false);
+	if (!enable_cmd) {
+		/*
+		 * The chip is enabled by default and we should not disable it.
+		 */
+		BT_DBG("New enable_state: ENABLE_BT_ENABLED");
+		btcg2900_info->enable_state = ENABLE_BT_ENABLED;
+		goto remove_users;
+	}
+
+	/* Set the HCI state before sending command to chip */
+	BT_DBG("New enable_state: ENABLE_WAITING_BT_DISABLED_CC");
+	btcg2900_info->enable_state = ENABLE_WAITING_BT_DISABLED_CC;
+
+	/* Send command to chip */
+	cg2900_write(info->bt_cmd, enable_cmd);
+
+	/*
+	 * Wait for callback to receive command complete and then wake us up
+	 * again.
+	 */
+	wait_event_interruptible_timeout(hci_wait_queue,
+				(info->enable_state == ENABLE_BT_DISABLED),
+				msecs_to_jiffies(RESP_TIMEOUT));
+	/* Check the current state to se that it worked. */
+	if (info->enable_state != ENABLE_BT_DISABLED) {
+		BT_ERR("Could not disable CG2900 BT core.");
+		BT_DBG("New enable_state: ENABLE_BT_ENABLED");
+		btcg2900_info->enable_state = ENABLE_BT_ENABLED;
+	}
+
+remove_users:
+	/* Finally deregister all users and free allocated data */
+	remove_bt_users(info);
+	return 0;
+}
+
+/**
+ * btcg2900_send() - Send packet to device.
+ * @skb:	sk buffer to be sent.
+ *
+ * BlueZ callback function for sending sk buffer.
+ *
+ * Returns:
+ *   0 if there is no error.
+ *   -EINVAL if NULL pointer is supplied.
+ *   -EOPNOTSUPP if supplied packet type is not supported.
+ *   Error codes from cg2900_write.
+ */
+static int btcg2900_send(struct sk_buff *skb)
+{
+	struct hci_dev *hdev;
+	struct btcg2900_info *info;
+	int err = 0;
+
+	if (!skb) {
+		BT_ERR(NAME "NULL supplied for skb");
+		return -EINVAL;
+	}
+
+	hdev = (struct hci_dev *)(skb->dev);
+	if (!hdev) {
+		BT_ERR(NAME "NULL supplied for hdev");
+		return -EINVAL;
+	}
+
+	info = (struct btcg2900_info *)hdev->driver_data;
+	if (!info) {
+		BT_ERR(NAME "NULL supplied for info");
+		return -EINVAL;
+	}
+
+	/* Update BlueZ stats */
+	hdev->stat.byte_tx += skb->len;
+
+	BT_DBG("Data transmit %d bytes", skb->len);
+
+	switch (bt_cb(skb)->pkt_type) {
+	case HCI_COMMAND_PKT:
+		BT_DBG("Sending HCI_COMMAND_PKT");
+		err = cg2900_write(info->bt_cmd, skb);
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		BT_DBG("Sending HCI_ACLDATA_PKT");
+		err = cg2900_write(info->bt_acl, skb);
+		hdev->stat.acl_tx++;
+		break;
+	default:
+		BT_ERR(NAME "Trying to transmit unsupported packet type"
+		       " (0x%.2X)", bt_cb(skb)->pkt_type);
+		err = -EOPNOTSUPP;
+		break;
+	};
+
+	return err;
+}
+
+/**
+ * btcg2900_destruct() - Destruct HCI interface.
+ * @hdev:	HCI device being destructed.
+ */
+static void btcg2900_destruct(struct hci_dev *hdev)
+{
+	BT_DBG("btcg2900_destruct");
+
+	if (!btcg2900_info)
+		return;
+
+	/*
+	 * When destruct is called it means that the Bluetooth stack is done
+	 * with the HCI device and we can now free it.
+	 * Normally we do this only when removing the whole module through
+	 * btcg2900_remove(), but when being reset we free the device here and
+	 * we then set the reset state so that the reset handler can allocate a
+	 * new HCI device and then register it to the Bluetooth stack.
+	 */
+	if (btcg2900_info->reset_state == RESET_ACTIVATED) {
+		if (btcg2900_info->hdev)
+			hci_free_dev(btcg2900_info->hdev);
+		BT_DBG("New reset_state: RESET_UNREGISTERED");
+		btcg2900_info->reset_state = RESET_UNREGISTERED;
+		wake_up_interruptible(&hci_wait_queue);
+	}
+}
+
+/**
+ * register_bluetooth() - Initialize module.
+ *
+ * Alloc, init, and register HCI device to BlueZ.
+ *
+ * Returns:
+ *   0 if there is no error.
+ *   -ENOMEM if allocation fails.
+ *   Error codes from hci_register_dev.
+ */
+static int register_bluetooth(void)
+{
+	int err;
+	static struct cg2900_bt_platform_data *pf_data;
+
+	pf_data = dev_get_platdata(&btcg2900_info->pdev->dev);
+
+	btcg2900_info->hdev = hci_alloc_dev();
+	if (!btcg2900_info->hdev) {
+		BT_ERR("Could not allocate mem for CG2900 BT driver");
+		return -ENOMEM;
+	}
+
+	SET_HCIDEV_DEV(btcg2900_info->hdev, &btcg2900_info->pdev->dev);
+	if (pf_data) {
+		btcg2900_info->hdev->bus = pf_data->bus;
+	} else {
+		BT_DBG(NAME "Missing platform data. Defaulting to UART");
+		btcg2900_info->hdev->bus = HCI_UART;
+	}
+	btcg2900_info->hdev->driver_data = btcg2900_info;
+	btcg2900_info->hdev->owner = THIS_MODULE;
+	btcg2900_info->hdev->open = btcg2900_open;
+	btcg2900_info->hdev->close = btcg2900_close;
+	btcg2900_info->hdev->send = btcg2900_send;
+	btcg2900_info->hdev->destruct = btcg2900_destruct;
+
+	err = hci_register_dev(btcg2900_info->hdev);
+	if (err) {
+		BT_ERR(NAME "Can not register HCI device (%d)", err);
+		hci_free_dev(btcg2900_info->hdev);
+	}
+
+	BT_DBG("New enable_state: ENABLE_IDLE");
+	btcg2900_info->enable_state = ENABLE_IDLE;
+	BT_DBG("New reset_state: RESET_IDLE");
+	btcg2900_info->reset_state = RESET_IDLE;
+
+	return err;
+}
+
+/**
+ * btcg2900_probe() - Initialize module.
+ *
+ * Allocate and initialize private data. Register to Bluetooth stack.
+ *
+ * Returns:
+ *   0 if there is no error.
+ *   -ENOMEM if allocation fails.
+ *   Error codes from register_bluetooth.
+ */
+static int __devinit btcg2900_probe(struct platform_device *pdev)
+{
+	int err;
+
+	BT_INFO("btcg2900_probe");
+
+	/* Initialize private data. */
+	btcg2900_info = kzalloc(sizeof(*btcg2900_info), GFP_KERNEL);
+	if (!btcg2900_info) {
+		BT_ERR("Could not alloc btcg2900_info struct.");
+		return -ENOMEM;
+	}
+
+	btcg2900_info->pdev = pdev;
+
+	/* Init and register hdev */
+	err = register_bluetooth();
+	if (err) {
+		BT_ERR("HCI Device registration error (%d)", err);
+		kfree(btcg2900_info);
+		btcg2900_info = NULL;
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * btcg2900_remove() - Remove module.
+ */
+static int __devexit btcg2900_remove(struct platform_device *pdev)
+{
+	int err = 0;
+
+	BT_INFO("btcg2900_remove");
+
+	if (!btcg2900_info)
+		return 0;
+
+	if (!btcg2900_info->hdev)
+		goto finished;
+
+	err = hci_unregister_dev(btcg2900_info->hdev);
+	if (err)
+		BT_ERR("Can not unregister HCI device (%d)", err);
+	hci_free_dev(btcg2900_info->hdev);
+
+finished:
+	kfree(btcg2900_info);
+	btcg2900_info = NULL;
+	return err;
+}
+
+static struct platform_driver btcg2900_driver = {
+	.driver = {
+		.name	= "cg2900-bt",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= btcg2900_probe,
+	.remove	= __devexit_p(btcg2900_remove),
+};
+
+/**
+ * btcg2900_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init btcg2900_init(void)
+{
+	BT_INFO("btcg2900_init");
+	return platform_driver_register(&btcg2900_driver);
+}
+
+/**
+ * btcg2900_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit btcg2900_exit(void)
+{
+	BT_INFO("btcg2900_exit");
+	platform_driver_unregister(&btcg2900_driver);
+}
+
+module_init(btcg2900_init);
+module_exit(btcg2900_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_AUTHOR("Henrik Possung ST-Ericsson");
+MODULE_AUTHOR("Josef Kindberg ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth HCI H:4 Driver for ST-Ericsson
controller");
-- 
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists