[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20101022164748.GA20440@comet.dominikbrodowski.net>
Date: Fri, 22 Oct 2010 18:47:48 +0200
From: Dominik Brodowski <linux@...inikbrodowski.net>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Anca Emanuel <anca.emanuel@...il.com>,
LKML <linux-kernel@...r.kernel.org>,
linux-pcmcia@...ts.infradead.org
Subject: [git pull] PCMCIA bugfixes
On Fri, Oct 22, 2010 at 08:21:15AM -0700, Linus Torvalds wrote:
> On Fri, Oct 22, 2010 at 12:35 AM, Anca Emanuel <anca.emanuel@...il.com> wrote:
> > CC [M] drivers/net/wireless/hostap/hostap_cs.o
> > drivers/staging/comedi/drivers/ni_daq_700.c: In function ‘dio700_config’:
> > drivers/staging/comedi/drivers/ni_daq_700.c:499: error: ‘win_req_t’
> > undeclared (first use in this function)
>
> Looks like the PCMCIA win_req_t fixup missed a driver or two.
>
> Dominik?
>
> And if somebody else wants to help out, look at commit cdb138080b78
> ("pcmcia: do not use win_req_t when calling pcmcia_request_window()")
> for guidance about what it is all about. That shows other drivers
> being converted.
>
> Anyway, in this case, it looks like the problem is literally that
> _unused_ declaration of 'win_req_t req'. Just remove that line. Does
> it compile and work then?
Yes, that line is superfluous -- sorry about that. Could you please pull
from
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git urgent
for the two attached patches, please?
Dominik Brodowski (2):
pcmcia: IOCARD is also required for using IRQs
pcmcia: fix ni_daq_700 compilation
drivers/pcmcia/pcmcia_resource.c | 4 +++-
drivers/staging/comedi/drivers/ni_daq_700.c | 1 -
include/pcmcia/ds.h | 2 ++
3 files changed, 5 insertions(+), 2 deletions(-)
Thanks,
Dominik
From: Dominik Brodowski <linux@...inikbrodowski.net>
Date: Fri, 22 Oct 2010 18:39:23 +0200
Subject: [PATCH] pcmcia: fix ni_daq_700 compilation
Reported-by: Anca Emanuel <anca.emanuel@...il.com>
Signed-off-by: Dominik Brodowski <linux@...inikbrodowski.net>
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index fc772a8..6b7372e 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -496,7 +496,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
static void dio700_config(struct pcmcia_device *link)
{
- win_req_t req;
int ret;
printk(KERN_INFO "ni_daq_700: cs-config\n");
From: Dominik Brodowski <linux@...inikbrodowski.net>
Date: Fri, 22 Oct 2010 08:46:36 +0200
Subject: [PATCH] pcmcia: IOCARD is also required for using IRQs
Dave Hinds pointed out to me that 37979e1546a7 will break b43 and
ray_cs, as IOCARD is not -- as the name would suggest -- only needed
for cards using IO ports. Instead, as it re-deines several pins, it
is also required for using interrupts.
Signed-off-by: Dominik Brodowski <linux@...inikbrodowski.net>
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index a9af0d7..0bdda5b 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -514,7 +514,9 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
}
/* Pick memory or I/O card, DMA mode, interrupt */
- if (p_dev->_io)
+ if (p_dev->_io || flags & CONF_ENABLE_IRQ)
+ flags |= CONF_ENABLE_IOCARD;
+ if (flags & CONF_ENABLE_IOCARD)
s->socket.flags |= SS_IOCARD;
if (flags & CONF_ENABLE_SPKR) {
s->socket.flags |= SS_SPKR_ENA;
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index d830c87..8479b66 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -259,6 +259,8 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev);
#define CONF_ENABLE_SPKR 0x0002
#define CONF_ENABLE_PULSE_IRQ 0x0004
#define CONF_ENABLE_ESR 0x0008
+#define CONF_ENABLE_IOCARD 0x0010 /* auto-enabled if IO resources or IRQ
+ * (CONF_ENABLE_IRQ) in use */
/* flags used by pcmcia_loop_config() autoconfiguration */
#define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists