[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1287791637-10329-23-git-send-email-maximlevitsky@gmail.com>
Date: Sat, 23 Oct 2010 01:53:50 +0200
From: Maxim Levitsky <maximlevitsky@...il.com>
To: Alex Dubov <oakad@...oo.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>,
Maxim Levitsky <maximlevitsky@...il.com>
Subject: [PATCH 22/29] memstick: jmb38x_ms: rework ISR
New ISR is simplier.
Also it only services the hardware when we expect to
thus it workarounds the stuck write ready bit hw bug.
Signed-off-by: Maxim Levitsky <maximlevitsky@...il.com>
---
drivers/memstick/host/jmb38x_ms.c | 90 +++++++++++++++++++++---------------
1 files changed, 52 insertions(+), 38 deletions(-)
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index d15118a..6b87e23 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -426,60 +426,74 @@ static irqreturn_t j38ms_isr(int irq, void *dev_id)
{
struct memstick_host *msh = dev_id;
struct j38ms_host *host = memstick_priv(msh);
- unsigned int irq_status;
+ u32 irq_status;
spin_lock(&host->lock);
- irq_status = readl(host->addr + INT_STATUS);
- dev_dbg(&host->chip->pdev->dev, "irq_status = %08x\n", irq_status);
+ irq_status = j38ms_read_reg(host, INT_STATUS);
+
if (irq_status == 0 || irq_status == (~0)) {
spin_unlock(&host->lock);
return IRQ_NONE;
}
- if (host->req) {
- if (irq_status & INT_STATUS_ANY_ERR) {
- if (irq_status & INT_STATUS_CRC_ERR)
- host->req->error = -EILSEQ;
- else
- host->req->error = -ETIME;
- } else {
- if (host->cmd_flags & DMA_DATA) {
- if (irq_status & INT_STATUS_EOTRAN)
- host->cmd_flags |= FIFO_READY;
- } else {
- if (irq_status & (INT_STATUS_FIFO_RRDY
- | INT_STATUS_FIFO_WRDY))
- j38ms_transfer_pio(host);
-
- if (irq_status & INT_STATUS_EOTRAN) {
- j38ms_transfer_pio(host);
- host->cmd_flags |= FIFO_READY;
- }
- }
-
- if (irq_status & INT_STATUS_EOTPC) {
- host->cmd_flags |= CMD_READY;
- if (host->cmd_flags & REG_DATA) {
- if (host->req->data_dir == READ)
- j38ms_read_tpc_inline(host);
- host->cmd_flags |= FIFO_READY;
- }
- }
+ dbg(host, "IRQ: status: %08x", irq_status);
+
+ if (irq_status & INT_STATUS_ANY_ERR)
+ dbg(host, "IRQ: error");
+
+ if (irq_status & INT_STATUS_FIFO_RRDY)
+ dbg(host, "IRQ: FIFO is now ready for reading");
+
+ if (irq_status & INT_STATUS_FIFO_WRDY)
+ dbg(host, "IRQ: FIFO is now ready for writing");
+
+ if (irq_status & INT_STATUS_EOTRAN)
+ dbg(host, "IRQ: FIFO IO tranfer done");
+
+ if (irq_status & INT_STATUS_EOTPC)
+ dbg(host, "IRQ: TPC complete");
+
+ if (!host->req)
+ goto out;
+
+ /* Errors */
+ if (irq_status & INT_STATUS_ANY_ERR) {
+ host->req->error =
+ (irq_status & INT_STATUS_CRC_ERR) ? -EILSEQ : -EIO;
+ goto out;
+ }
+
+ /* End of TPC interrupt */
+ if (irq_status & INT_STATUS_EOTPC) {
+ host->cmd_flags |= CMD_READY;
+
+ if (host->cmd_flags & REG_DATA) {
+ if (host->req->data_dir == READ)
+ j38ms_read_tpc_inline(host);
+ host->cmd_flags |= FIFO_READY;
}
}
+ /* Fifo handling */
+ if (irq_status & INT_STATUS_EOTRAN)
+ host->cmd_flags |= FIFO_READY;
+ else if (irq_status & (INT_STATUS_FIFO_RRDY | INT_STATUS_FIFO_WRDY))
+ if (host->cmd_flags & PIO_DATA)
+ j38ms_transfer_pio(host);
+
+out:
if (irq_status & (INT_STATUS_MEDIA_IN | INT_STATUS_MEDIA_OUT)) {
- dev_dbg(&host->chip->pdev->dev, "media changed\n");
+ dbg(host, "IRQ: media changed");
memstick_detect_change(msh);
}
- writel(irq_status, host->addr + INT_STATUS);
+ /* Yes, interrupt status is cleared by setting the bits as usual */
+ j38ms_write_reg(host, INT_STATUS, irq_status);
- if (host->req
- && (((host->cmd_flags & CMD_READY)
- && (host->cmd_flags & FIFO_READY))
- || host->req->error))
+ if (host->req && (((host->cmd_flags & CMD_READY)
+ && (host->cmd_flags & FIFO_READY)) || host->req->error)) {
j38ms_complete_tpc(msh, 0);
+ }
spin_unlock(&host->lock);
return IRQ_HANDLED;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists