[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <C8F551D39A7C724E987CF8DD11D3178304D7CC86@svr3.sixnetio.com>
Date: Mon, 25 Oct 2010 07:44:22 -0400
From: "Joshua Hoke" <Joshua.Hoke@...net.com>
To: "David Miller" <davem@...emloft.net>
Cc: <nicolas.ferre@...el.com>, <jpirko@...hat.com>,
<peter.korsgaard@...co.com>, <eric.dumazet@...il.com>,
<haavard.skinnemoen@...el.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <akpm@...ux-foundation.org>
Subject: RE: [PATCH] macb: Don't re-enable interrupts while in polling mode
> Your email client is breaking up long lines which corrupts the
> patch.
>
> Please fix this up in your email client and resubmit.
Thanks for pointing this out. It looks fine in my sent folder but here's
a second try. In case this doesn't work, I've attached the contents to the bug as: https://bugzilla.kernel.org/attachment.cgi?id=34972
Contents of first e-mail follow, maybe not mangled this time.
From: Joshua Hoke <joshua.hoke@...net.com>
[PATCH] macb: Don't re-enable interrupts while in polling mode
On a busy network, the macb driver could get stuck in the interrupt
handler, quickly triggering the watchdog, due to a confluence of
factors:
1. macb_poll re-enables interrupts unconditionally, even when it will
be called again because it exhausted its rx budget
2. macb_interrupt only disables interrupts after scheduling
macb_poll, but scheduling fails when macb_poll is already scheduled
because it didn't call napi_complete
3. macb_interrupt loops until the interrupt status register is clear,
which will never happen in this case if the driver doesn't disable
the RX interrupt
Since macb_interrupt runs in interrupt context, this effectively locks
up the machine, triggering the hardware watchdog.
This issue was readily reproducible on a flooded network with a
modified 2.6.27.48 kernel. The same problem appears to still be in the
2.6.36-rc8 driver code, so I am submitting this patch against that
version. I have not tested this version of the patch except to make
sure the kernel compiles.
Signed-off-by: Joshua Hoke <joshua.hoke@...net.com>
---
I'm submitting this at the request of Andrew Morton in this bug:
https://bugzilla.kernel.org/show_bug.cgi?id=20732
This version of the patch applies to 2.6.36-rc8 but has not been
tested. In particular I am assuming that napi_schedule_prep() behaves
the same as netif_rx_schedule_prep() did by failing when the macb_poll
callback is already scheduled.
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index ff2f158..36cf594 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -515,14 +515,15 @@ static int macb_poll(struct napi_struct *napi, int budget)
(unsigned long)status, budget);
work_done = macb_rx(bp, budget);
- if (work_done < budget)
+ if (work_done < budget) {
napi_complete(napi);
- /*
- * We've done what we can to clean the buffers. Make sure we
- * get notified when new packets arrive.
- */
- macb_writel(bp, IER, MACB_RX_INT_FLAGS);
+ /*
+ * We've done what we can to clean the buffers. Make sure we
+ * get notified when new packets arrive.
+ */
+ macb_writel(bp, IER, MACB_RX_INT_FLAGS);
+ }
/* TODO: Handle errors */
@@ -550,12 +551,16 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
}
if (status & MACB_RX_INT_FLAGS) {
+ /*
+ * There's no point taking any more interrupts
+ * until we have processed the buffers. The
+ * scheduling call may fail if the poll routine
+ * is already scheduled, so disable interrupts
+ * now.
+ */
+ macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
+
if (napi_schedule_prep(&bp->napi)) {
- /*
- * There's no point taking any more interrupts
- * until we have processed the buffers
- */
- macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
dev_dbg(&bp->pdev->dev,
"scheduling RX softirq\n");
__napi_schedule(&bp->napi);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists