| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 25 Oct 2010 10:50:21 +0900
From: Paul Mundt <lethal@...ux-sh.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [GIT PULL] sh updates for 2.6.37-rc1
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
Which contains:
Akinobu Mita (1):
sh: fix uninitialized spinlock
Andrew Murray (1):
sh: Use __GFP_ZERO for dma_generic_alloc_coherent().
Arnd Bergmann (1):
sh: kill big kernel lock
Carmelo AMOROSO (1):
sh: Add syscall entries for non multiplexed socket calls
Guennadi Liakhovetski (5):
dmaengine: initialise DMA engine before MMC
sh: move a debug printk() to a more meaningful location in the clock driver
sh: remove bogus highest / lowest logic from clock rate rounding
sh: fix a kfree address in clkdev code
sh: fix clk_get() error handling
Hitoshi Mitake (1):
sh: SH-2007 board support.
Kulikov Vasiliy (2):
sh: dma: check return value of create_proc_read_entry()
sh: boards/mach-x3proto: gpio: fix error handling code
Kuninori Morimoto (2):
sh: ecovec24: modify tsc2007 platform settings
sh: clkfwk: modify for_each_frequency end condition
Magnus Damm (6):
clocksource: sh_cmt: One-off clockevent fix V2
clocksource: sh_cmt: Rate calculation fix
i2c: i2c-sh_mobile irq rollback fix
sh: boot kernel with SR.BL set
sh: free-without-alloc fix for sh_mobile_lcdcfb
sh: remove name and id from struct clk
Markus Pietrek (1):
sound/soc/sh/siu: Fixed undefined dma_length of scatter gather list
Matt Fleming (3):
sh: Fix typos in PCI initialization message
sh: Additional register definitions for SH7786 PCIe.
sh: Set CONFIG_SYSFS_DEPRECATED_V2=n
Nobuhiro Iwamatsu (3):
sh: Drop dependence for 29bit mode of trigger_address_error()
sh: Fix address calculation of Initrd
sh: i2c-sh7760: Replase from ctrl_* to __raw_*
Paul Mundt (73):
sh: Add kprobe-based event tracer.
sh: split out ptrace header for _32/_64 variants.
sh: kprobes SMP support.
sh: update the FDPIC relocations.
sh: fix up an off-by-1 in the number of early ioremap fixmaps.
sh: Fix up PUD trampling in ranged page table init for X2TLB.
sh: Provide a global TLB flush for U/I-TLB clear.
sh: wire up fanotify/prlimit64 syscalls.
sh: fix up fallout from syscall arg constification.
sh: stub __flush_tlb_global() definition for nommu.
sh: Support type 1 accesses for SH7786 PCI.
sh: Fix up SH7786 PCIe PHY initialization.
sh: reinstate clock framework rate rounding.
sh: Relax devfn constraints for SH7786 PCIe.
sh: sh2007/sh7757lcr defconfig reduction.
sh: Make SH7786 PCIe port reset logic more aggressive.
sh: Establish a SuperHyway<->PCIe window mapping on SH7786 PCIe.
sh: Ignore 32-bit windows in 29-bit mode for SH7786 PCIe.
sh: Properly wire up channel 2's I/O window on SH7786 PCIe.
sh: Hook up 3rd memory window for all SH7786 PCIe channels.
sh: Provide a non-multiplexed sys_recvmmsg path.
Revert "sh: ecovec24: modify tsc2007 platform settings"
mfd: Fix up section mismatches in SH SDHI.
usb: Fix up r8a66597-hcd section mismatches.
sh: pci: Use generic pci_enable_resources() for pcibios_enable_device().
sh: pci: Toggle configuration accesses on SH7786.
sh: pci: Give SH7786 PHY some time to settle.
sh: pci: Move Renesas PCI IDs to a better place.
sh: pci: Support root complex config accesses on SH7786 PCIe.
sh: pci: Discard initial PCICONF4/5 settings for SH7786 PCIe.
sh: pci: Support ports with disabled links on SH7786 PCIe.
sh: pci: Use I/O accessors consistently in SH7786 PCIe init code.
sh: pci: clock framework support for SH7786 PCIe.
sh: pci: Use a generic raw spinlock for PCI config access locking.
sh: provide generic arch_debugfs_dir.
sh: Update SH-X3 subtype for clkdev lookups.
sh: Support userimask for all SH-X3 interrupt controllers.
sh: Support IRQ balancing for SH-X3 proto cores, too.
sh: pinmux support for SH-X3 proto CPUs.
sh: Handle pinmux for SH-X3 proto IRQ/IRL modes.
sh: Support early IRQ vector map reservation for delayed controllers.
sh: Allow GPIO chips to register IRQ mappings.
sh: mach-x3proto: Move the ilsel header to a better place.
sh: mach-x3proto: Support for baseboard GPIOs.
sh: mach-x3proto: gpio-keys support.
sh: mach-x3proto: Improve ILSEL debugging.
sh: pfc: support pinmux deregistration.
sh: Drop __initdata for SH-X3 pinmux tables.
sh: pfc: Fix up BUG() triggered by gpiolib debugfs lookups.
sh: intc: Implement reverse mapping for IRQs to per-controller IDs.
sh: intc: Support virtual mappings for IRQ subgroups.
sh: intc: Handle early lookups of subgroup IRQs.
sh: intc: Split up the INTC code.
sh: Wire up INTC subgroup splitting for SH7786 SCIF1.
sh: intc: Add missing files.
sh: intc: Fix build with IRQ balancing disabled.
sh: Fix up the SH-3 build.
sh: wire up perf alignment and emulation faults.
sh: perf: Support SH-X3 hardware counters.
sh: perf: Set up perf_max_events.
sh: use pr_fmt for clock framework, too.
sh: mach-sdk7786: Add support for fpga gpios.
sh: Fix up PMB locking.
sh: pci: Support slot 4 routing on SDK7786.
sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
sh: Provide a generic SRAM pool for tiny memories.
sh: mach-sdk7786: Add support for the FPGA SRAM.
sh: pci: Convert to upper/lower_32_bits() helpers.
sh: clkfwk: support clock remapping.
sh: clkfwk: Abstract rate rounding helper.
sh: clkfwk: Add a helper for rate rounding by divisor ranges.
sh: clkfwk: Fix fault in frequency iterator.
sh: clkfwk: Shuffle around to match the intc split up.
Phil Edworthy (1):
sh: Add sh7724 BEU resources
Sam Ravnborg (1):
sh: fix recursive dependency in Kconfig
Yoshihiro Shimoda (7):
sh: modify NR_IRQS from 256 to 512
sh: change PVR of SH7757 for 2nd cut
sh: fix the id of scif in setup-sh7757
sh: add some INTC_VECT for setup-sh7757
sh: modify pinmux for SH7757 2nd cut
sh: modify clock framework of SH7757
sh: add sh7757lcr board support
matt mooney (1):
sh: change to new flag variable
arch/sh/Kconfig | 6 +-
arch/sh/boards/Kconfig | 18 +
arch/sh/boards/Makefile | 2 +
arch/sh/boards/board-sh2007.c | 133 ++
arch/sh/boards/board-sh7757lcr.c | 374 +++++
arch/sh/boards/mach-ecovec24/setup.c | 6 +-
arch/sh/boards/mach-sdk7786/Makefile | 5 +-
arch/sh/boards/mach-sdk7786/gpio.c | 49 +
arch/sh/boards/mach-sdk7786/setup.c | 54 +-
arch/sh/boards/mach-sdk7786/sram.c | 72 +
arch/sh/boards/mach-x3proto/Makefile | 2 +
arch/sh/boards/mach-x3proto/gpio.c | 135 ++
arch/sh/boards/mach-x3proto/ilsel.c | 18 +-
arch/sh/boards/mach-x3proto/setup.c | 132 ++-
arch/sh/boot/compressed/head_32.S | 4 +-
arch/sh/cchips/hd6446x/Makefile | 2 +-
arch/sh/configs/ap325rxa_defconfig | 1 -
arch/sh/configs/cayman_defconfig | 1 -
arch/sh/configs/dreamcast_defconfig | 1 -
arch/sh/configs/ecovec24-romimage_defconfig | 1 -
arch/sh/configs/edosk7760_defconfig | 1 -
arch/sh/configs/espt_defconfig | 1 -
arch/sh/configs/hp6xx_defconfig | 1 -
arch/sh/configs/kfr2r09-romimage_defconfig | 1 -
arch/sh/configs/kfr2r09_defconfig | 1 -
arch/sh/configs/landisk_defconfig | 1 -
arch/sh/configs/lboxre2_defconfig | 1 -
arch/sh/configs/magicpanelr2_defconfig | 1 -
arch/sh/configs/microdev_defconfig | 1 -
arch/sh/configs/migor_defconfig | 1 -
arch/sh/configs/polaris_defconfig | 1 -
arch/sh/configs/r7780mp_defconfig | 1 -
arch/sh/configs/r7785rp_defconfig | 1 -
arch/sh/configs/rts7751r2d1_defconfig | 1 -
arch/sh/configs/rts7751r2dplus_defconfig | 1 -
arch/sh/configs/sdk7780_defconfig | 1 -
arch/sh/configs/se7343_defconfig | 1 -
arch/sh/configs/se7712_defconfig | 1 -
arch/sh/configs/se7721_defconfig | 1 -
arch/sh/configs/se7722_defconfig | 1 -
arch/sh/configs/se7724_defconfig | 1 -
arch/sh/configs/se7750_defconfig | 1 -
arch/sh/configs/se7751_defconfig | 1 -
arch/sh/configs/se7780_defconfig | 1 -
arch/sh/configs/sh03_defconfig | 1 -
arch/sh/configs/sh2007_defconfig | 212 +++
arch/sh/configs/sh7710voipgw_defconfig | 1 -
arch/sh/configs/sh7757lcr_defconfig | 85 ++
arch/sh/configs/sh7763rdp_defconfig | 1 -
arch/sh/configs/sh7785lcr_defconfig | 1 -
arch/sh/configs/shx3_defconfig | 1 -
arch/sh/configs/snapgear_defconfig | 1 -
arch/sh/configs/systemh_defconfig | 1 -
arch/sh/configs/titan_defconfig | 1 -
arch/sh/configs/ul2_defconfig | 1 -
arch/sh/drivers/dma/dma-api.c | 4 +-
arch/sh/drivers/pci/Makefile | 1 +
arch/sh/drivers/pci/fixups-sdk7786.c | 67 +
arch/sh/drivers/pci/ops-sh4.c | 11 +-
arch/sh/drivers/pci/ops-sh7786.c | 69 +-
arch/sh/drivers/pci/pci-sh7751.c | 2 +-
arch/sh/drivers/pci/pci-sh7780.c | 2 +-
arch/sh/drivers/pci/pci-sh7780.h | 6 -
arch/sh/drivers/pci/pci.c | 43 +-
arch/sh/drivers/pci/pcie-sh7786.c | 251 +++-
arch/sh/drivers/pci/pcie-sh7786.h | 56 +-
arch/sh/include/asm/Kbuild | 2 +
arch/sh/include/asm/elf.h | 27 +-
arch/sh/include/asm/fixmap.h | 4 +-
arch/sh/include/asm/gpio.h | 6 +-
arch/sh/include/asm/irq.h | 2 +-
arch/sh/include/asm/kprobes.h | 1 -
arch/sh/include/asm/pci.h | 2 +
arch/sh/include/asm/processor_32.h | 3 -
arch/sh/include/asm/processor_64.h | 3 -
arch/sh/include/asm/ptrace.h | 169 +--
arch/sh/include/asm/ptrace_32.h | 83 +
arch/sh/include/asm/ptrace_64.h | 20 +
arch/sh/include/asm/sizes.h | 1 +
arch/sh/include/asm/sram.h | 38 +
arch/sh/include/asm/syscalls_32.h | 7 +-
arch/sh/include/asm/system.h | 2 -
arch/sh/include/asm/system_32.h | 15 +-
arch/sh/include/asm/tlbflush.h | 2 +
arch/sh/include/asm/unistd_32.h | 27 +-
arch/sh/include/asm/unistd_64.h | 5 +-
arch/sh/include/cpu-sh3/cpu/mmu_context.h | 1 +
arch/sh/include/cpu-sh4/cpu/freq.h | 4 +-
arch/sh/include/cpu-sh4/cpu/sh7757.h | 301 ++--
arch/sh/include/cpu-sh4/cpu/shx3.h | 64 +
arch/sh/include/mach-common/mach/sh2007.h | 117 ++
arch/sh/include/mach-sdk7786/mach/fpga.h | 26 +-
arch/sh/include/mach-x3proto/mach/hardware.h | 12 +
arch/sh/include/{asm => mach-x3proto/mach}/ilsel.h | 0
arch/sh/kernel/Makefile | 8 +-
arch/sh/kernel/clkdev.c | 4 +-
arch/sh/kernel/cpu/sh4/probe.c | 2 +-
arch/sh/kernel/cpu/sh4a/Makefile | 5 +-
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 199 ++--
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 225 ++-
arch/sh/kernel/cpu/sh4a/intc-shx3.c | 34 +
arch/sh/kernel/cpu/sh4a/perf_event.c | 20 +-
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 1582 ++++++++++++--------
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 587 ++++++++
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 66 +
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 222 ++-
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 126 +-
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 42 +-
arch/sh/kernel/head_32.S | 2 +-
arch/sh/kernel/io_trapped.c | 2 +-
arch/sh/kernel/irq.c | 2 +
arch/sh/kernel/kdebugfs.c | 16 +
arch/sh/kernel/kprobes.c | 100 +-
arch/sh/kernel/perf_event.c | 1 +
arch/sh/kernel/ptrace.c | 33 +
arch/sh/kernel/ptrace_32.c | 27 +
arch/sh/kernel/ptrace_64.c | 88 +-
arch/sh/kernel/reboot.c | 4 +
arch/sh/kernel/setup.c | 22 +-
arch/sh/kernel/syscalls_32.S | 22 +
arch/sh/kernel/syscalls_64.S | 3 +
arch/sh/kernel/traps_32.c | 29 +-
arch/sh/kernel/traps_64.c | 11 +-
arch/sh/lib/Makefile | 2 +-
arch/sh/math-emu/math.c | 3 +
arch/sh/mm/Kconfig | 4 +
arch/sh/mm/Makefile | 3 +-
arch/sh/mm/asids-debugfs.c | 2 +-
arch/sh/mm/cache-debugfs.c | 10 +-
arch/sh/mm/consistent.c | 3 +-
arch/sh/mm/init.c | 52 +-
arch/sh/mm/nommu.c | 4 +
arch/sh/mm/pmb.c | 35 +-
arch/sh/mm/sram.c | 34 +
arch/sh/mm/tlb-debugfs.c | 11 +-
arch/sh/mm/tlbflush_32.c | 16 +
arch/sh/mm/tlbflush_64.c | 5 +
arch/sh/tools/mach-types | 2 +
drivers/Makefile | 2 +-
drivers/clocksource/sh_cmt.c | 12 +-
drivers/i2c/busses/i2c-sh7760.c | 4 +-
drivers/i2c/busses/i2c-sh_mobile.c | 23 +-
drivers/mfd/sh_mobile_sdhi.c | 2 +-
drivers/serial/sh-sci.h | 17 +-
drivers/sh/Kconfig | 25 +-
drivers/sh/Makefile | 7 +-
drivers/sh/clk/Makefile | 3 +
drivers/sh/{clk.c => clk/core.c} | 203 +++-
drivers/sh/{clk-cpg.c => clk/cpg.c} | 11 +-
drivers/sh/intc.c | 1390 -----------------
drivers/sh/intc/Kconfig | 35 +
drivers/sh/intc/Makefile | 5 +
drivers/sh/intc/access.c | 237 +++
drivers/sh/intc/balancing.c | 97 ++
drivers/sh/intc/chip.c | 215 +++
drivers/sh/intc/core.c | 469 ++++++
drivers/sh/intc/dynamic.c | 135 ++
drivers/sh/intc/handle.c | 307 ++++
drivers/sh/intc/internals.h | 186 +++
drivers/sh/intc/userimask.c | 83 +
drivers/sh/intc/virq-debugfs.c | 64 +
drivers/sh/intc/virq.c | 255 ++++
drivers/sh/pfc.c | 17 +-
drivers/usb/host/r8a66597-hcd.c | 4 +-
drivers/video/sh_mobile_lcdcfb.c | 6 +-
include/linux/pci_ids.h | 7 +
include/linux/sh_clk.h | 17 +-
include/linux/sh_intc.h | 16 +-
include/linux/sh_pfc.h | 1 +
sound/soc/sh/siu_pcm.c | 2 +
170 files changed, 7270 insertions(+), 3059 deletions(-)
create mode 100644 arch/sh/boards/board-sh2007.c
create mode 100644 arch/sh/boards/board-sh7757lcr.c
create mode 100644 arch/sh/boards/mach-sdk7786/gpio.c
create mode 100644 arch/sh/boards/mach-sdk7786/sram.c
create mode 100644 arch/sh/boards/mach-x3proto/gpio.c
create mode 100644 arch/sh/configs/sh2007_defconfig
create mode 100644 arch/sh/configs/sh7757lcr_defconfig
create mode 100644 arch/sh/drivers/pci/fixups-sdk7786.c
create mode 100644 arch/sh/include/asm/ptrace_32.h
create mode 100644 arch/sh/include/asm/ptrace_64.h
create mode 100644 arch/sh/include/asm/sram.h
create mode 100644 arch/sh/include/cpu-sh4/cpu/shx3.h
create mode 100644 arch/sh/include/mach-common/mach/sh2007.h
create mode 100644 arch/sh/include/mach-x3proto/mach/hardware.h
rename arch/sh/include/{asm => mach-x3proto/mach}/ilsel.h (100%)
create mode 100644 arch/sh/kernel/cpu/sh4a/intc-shx3.c
create mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
create mode 100644 arch/sh/kernel/kdebugfs.c
create mode 100644 arch/sh/kernel/ptrace.c
create mode 100644 arch/sh/mm/sram.c
create mode 100644 drivers/sh/clk/Makefile
rename drivers/sh/{clk.c => clk/core.c} (74%)
rename drivers/sh/{clk-cpg.c => clk/cpg.c} (96%)
delete mode 100644 drivers/sh/intc.c
create mode 100644 drivers/sh/intc/Kconfig
create mode 100644 drivers/sh/intc/Makefile
create mode 100644 drivers/sh/intc/access.c
create mode 100644 drivers/sh/intc/balancing.c
create mode 100644 drivers/sh/intc/chip.c
create mode 100644 drivers/sh/intc/core.c
create mode 100644 drivers/sh/intc/dynamic.c
create mode 100644 drivers/sh/intc/handle.c
create mode 100644 drivers/sh/intc/internals.h
create mode 100644 drivers/sh/intc/userimask.c
create mode 100644 drivers/sh/intc/virq-debugfs.c
create mode 100644 drivers/sh/intc/virq.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists