| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1288029002.2675.22.camel@sbsiddha-MOBL3.sc.intel.com>
Date: Mon, 25 Oct 2010 10:50:02 -0700
From: Suresh Siddha <suresh.b.siddha@...el.com>
To: Yinghai Lu <yinghai@...nel.org>
Cc: Thomas Gleixner <tglx@...utronix.de>, Ingo Molnar <mingo@...e.hu>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Len Brown <lenb@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 15/15] x86: Disabling x2apic if nox2apic is specified
On Sun, 2010-10-24 at 15:09 -0700, Yinghai Lu wrote:
> [PATCH -v2] x86: Disable x2apic if nox2apic is specified
>
> For
> 1. x2apic preenabled system
> 2. first kernel have x2apic enabled, and try to kexec second kernel with "nox2apic"
>
> Will put back cpu with apic id < 255 into xapic mode, instead of panic.
>
> -v2: use x2apic_disabled instead of nox2apic, Suggested by Thomas
> update x2apic_supported with x2apic_disabled, Suggested by Thomas
>
> Signed-off-by: Yinghai Lu <yinghai@...nel.org>
Yinghai, Have you validated this patch on a system having apicid's > 255
and when the bios has enabled x2apic? When a bios enables x2apic
(typically when it finds processors with apic id's > 255), it also
enables interrupt-remapping before enabling x2apic in the bios.
So not sure what is the behavior with this patch(along with the nox2apic
boot option). Does the kernel boot with cpu's having < 255 apicid, and
also use the interrupt-remapping but with xapic mode?
Also, the boot cpu's apic id might be already > 8 bit, but by forcing to
use xapic, the lower 8 bit portion of it might conflict with another AP
(whose 32bit apic id value is < 255). So we need to be careful in this
case aswell. Have you validated this scenario aswell? May be we should
(or already does) skip that AP having the same 8bit apic id etc.
thanks,
suresh
> ---
> arch/x86/include/asm/apic.h | 6 +++--
> arch/x86/include/asm/apicdef.h | 1
> arch/x86/kernel/acpi/boot.c | 10 +++++++-
> arch/x86/kernel/apic/apic.c | 46 ++++++++++++++++++++++++++++++++++-------
> arch/x86/mm/srat_64.c | 7 +++++-
> 5 files changed, 58 insertions(+), 12 deletions(-)
>
> Index: linux-2.6/arch/x86/include/asm/apic.h
> ===================================================================
> --- linux-2.6.orig/arch/x86/include/asm/apic.h
> +++ linux-2.6/arch/x86/include/asm/apic.h
> @@ -176,6 +176,7 @@ static inline u64 native_x2apic_icr_read
> }
>
> extern int x2apic_phys;
> +extern int x2apic_disabled;
> extern void check_x2apic(void);
> extern void enable_x2apic(void);
> extern void x2apic_icr_write(u32 low, u32 id);
> @@ -183,7 +184,7 @@ static inline int x2apic_enabled(void)
> {
> int msr, msr2;
>
> - if (!cpu_has_x2apic)
> + if (!cpu_has_x2apic || x2apic_disabled)
> return 0;
>
> rdmsr(MSR_IA32_APICBASE, msr, msr2);
> @@ -192,7 +193,7 @@ static inline int x2apic_enabled(void)
> return 0;
> }
>
> -#define x2apic_supported() (cpu_has_x2apic)
> +#define x2apic_supported() (cpu_has_x2apic && !x2apic_disabled)
> static inline void x2apic_force_phys(void)
> {
> x2apic_phys = 1;
> @@ -214,6 +215,7 @@ static inline void x2apic_force_phys(voi
>
> #define x2apic_preenabled 0
> #define x2apic_supported() 0
> +#define x2apic_disabled 1
> #endif
>
> extern void enable_IR_x2apic(void);
> Index: linux-2.6/arch/x86/kernel/acpi/boot.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
> +++ linux-2.6/arch/x86/kernel/acpi/boot.c
> @@ -213,6 +213,8 @@ static int __init
> acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
> {
> struct acpi_madt_local_x2apic *processor = NULL;
> + int apic_id;
> + u8 enabled;
>
> processor = (struct acpi_madt_local_x2apic *)header;
>
> @@ -221,6 +223,8 @@ acpi_parse_x2apic(struct acpi_subtable_h
>
> acpi_table_print_madt_entry(header);
>
> + apic_id = processor->local_apic_id;
> + enabled = processor->lapic_flags & ACPI_MADT_ENABLED;
> #ifdef CONFIG_X86_X2APIC
> /*
> * We need to register disabled CPU as well to permit
> @@ -229,8 +233,10 @@ acpi_parse_x2apic(struct acpi_subtable_h
> * to not preallocating memory for all NR_CPUS
> * when we use CPU hotplug.
> */
> - acpi_register_lapic(processor->local_apic_id, /* APIC ID */
> - processor->lapic_flags & ACPI_MADT_ENABLED);
> + if (x2apic_disabled && (apic_id >= 0xff) && enabled)
> + printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
> + else
> + acpi_register_lapic(apic_id, enabled);
> #else
> printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
> #endif
> Index: linux-2.6/arch/x86/kernel/apic/apic.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/apic/apic.c
> +++ linux-2.6/arch/x86/kernel/apic/apic.c
> @@ -138,15 +138,14 @@ int x2apic_mode;
> #ifdef CONFIG_X86_X2APIC
> /* x2apic enabled before OS handover */
> static int x2apic_preenabled;
> +int x2apic_disabled;
> static __init int setup_nox2apic(char *str)
> {
> - if (x2apic_enabled()) {
> - pr_warning("Bios already enabled x2apic, "
> - "can't enforce nox2apic");
> - return 0;
> - }
> + if (x2apic_enabled())
> + pr_warning("Bios already enabled x2apic, will disable it");
> +
> + x2apic_disabled = 1;
>
> - setup_clear_cpu_cap(X86_FEATURE_X2APIC);
> return 0;
> }
> early_param("nox2apic", setup_nox2apic);
> @@ -1393,8 +1392,33 @@ void __cpuinit end_local_APIC_setup(void
> }
>
> #ifdef CONFIG_X86_X2APIC
> +
> +static void disable_x2apic(void)
> +{
> + int msr, msr2;
> +
> + if (!cpu_has_x2apic)
> + return;
> +
> + rdmsr(MSR_IA32_APICBASE, msr, msr2);
> + if (msr & X2APIC_ENABLE) {
> + pr_info("Disabling x2apic\n");
> + /*
> + * Need to disable xapic and x2apic at the same time at first
> + * then enable xapic
> + */
> + wrmsr(MSR_IA32_APICBASE, msr & ~(X2APIC_ENABLE | XAPIC_ENABLE),
> + 0);
> + wrmsr(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE, 0);
> + }
> +}
> void check_x2apic(void)
> {
> + if (x2apic_disabled) {
> + disable_x2apic();
> + return;
> + }
> +
> if (x2apic_enabled()) {
> pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
> x2apic_preenabled = x2apic_mode = 1;
> @@ -1405,6 +1429,11 @@ void enable_x2apic(void)
> {
> int msr, msr2;
>
> + if (x2apic_disabled) {
> + disable_x2apic();
> + return;
> + }
> +
> if (!x2apic_mode)
> return;
>
> @@ -1473,6 +1502,9 @@ void __init enable_IR_x2apic(void)
> else
> ret = enable_IR();
>
> + if (x2apic_disabled)
> + goto nox2apic;
> +
> if (!ret) {
> /* IR is required if there is APIC ID > 255 even when running
> * under KVM
> @@ -1509,7 +1541,7 @@ out:
>
> if (x2apic_preenabled)
> panic("x2apic: enabled by BIOS but kernel init failed.");
> - else if (cpu_has_x2apic)
> + else if (cpu_has_x2apic && !x2apic_disabled)
> pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
> }
>
> Index: linux-2.6/arch/x86/mm/srat_64.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/mm/srat_64.c
> +++ linux-2.6/arch/x86/mm/srat_64.c
> @@ -126,6 +126,12 @@ acpi_numa_x2apic_affinity_init(struct ac
> if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
> return;
> pxm = pa->proximity_domain;
> + apic_id = pa->apic_id;
> + if (x2apic_disabled && (apic_id >= 0xff)) {
> + printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
> + pxm, apic_id);
> + return;
> + }
> node = setup_node(pxm);
> if (node < 0) {
> printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
> @@ -133,7 +139,6 @@ acpi_numa_x2apic_affinity_init(struct ac
> return;
> }
>
> - apic_id = pa->apic_id;
> apicid_to_node[apic_id] = node;
> node_set(node, cpu_nodes_parsed);
> acpi_numa = 1;
> Index: linux-2.6/arch/x86/include/asm/apicdef.h
> ===================================================================
> --- linux-2.6.orig/arch/x86/include/asm/apicdef.h
> +++ linux-2.6/arch/x86/include/asm/apicdef.h
> @@ -141,6 +141,7 @@
>
> #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
> #define APIC_BASE_MSR 0x800
> +#define XAPIC_ENABLE (1UL << 11)
> #define X2APIC_ENABLE (1UL << 10)
>
> #ifdef CONFIG_X86_32
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists