| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20101025184451.GB7206@atomide.com>
Date: Mon, 25 Oct 2010 11:44:51 -0700
From: Tony Lindgren <tony@...mide.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-omap@...r.kernel.org
Subject: [GIT PULL] omap updates for 2.6.37
Hi Linus,
Please pull omap updates from:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
There are few minor merge conflicts, but I've left them unmerged as I believe
that's the way you want them nowadays. The merge conflicts are just overlapping
additions, and a OMAP2/OMAP2 vs OMAP24XX/OMAP34XX ifdef issue where the former is
the way to go. Looks like the crypto device platform data got accidentally added
in both the crypto and omap trees.
I've also pushed a omap-for-linus-merged branch in case you don't want to
do the merging of the conflicts.
Regards,
Tony
The following changes since commit 33081adf8b89d5a716d7e1c60171768d39795b39:
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 (2010-10-25 08:32:05 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus
Anand Gadiyar (3):
omap: usb: fix build warning
ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
omap: complete removal of machine_desc.io_pg_offst and .phys_io
Benoit Cousson (14):
OMAP: hwmod: Rename dma_ch to dma_req
OMAP: hwmod: Do not disable clocks if hwmod already in idle
OMAP4: prcm: Add temporarily helper functions for rmw and read inside the PRM
OMAP: hwmod: Force a softreset during _setup
OMAP: hwmod: Fix softreset status check for some new OMAP4 IPs
OMAP: hwmod: Fix softreset for modules with optional clocks
OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2
OMAP4: pm: Change l3_main to l3_main_1 during bus device init
OMAP4: clock: Fix clock names and align with hwmod names
OMAP4: clock: Add optional clock nodes
OMAP4: clocks: Fix ES2 clock issues
OMAP4: hwmod data: Add watchdog timer
OMAP4: UART: Add uart1-4 hwmods data for omap4
omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
Benoît Cousson (2):
OMAP4: PRM: add module hard reset support
OMAP: hwmod: Add hardreset management support
Charulatha V (1):
OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
Cory Maccarrone (1):
HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
David Anders (4):
omap4: Panda: Add DEBUG_LL support
omap4: pandaboard: remove unused hsmmc definition
omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
omap4: pandaboard: enable the ehci port on pandaboard
Dmitry Kasatkin (1):
omap: crypto: updates to enable omap aes
Enric Balletbo i Serra (7):
omap3: Add minimal OMAP3 IGEP module support
omap3: Add external VBUS power switch and overcurrent detect onIGEP v2 board
omap3: fix and improve the LED handling on IGEP v2 board
omap3: Introduce function to detect the IGEP v2 hardwarerevision
omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2
omap3: Add i2c eeprom driver to read EDID on IGEP v2
omap3: Remove VMMC2 regulator on IGEP v2
Govindraj.R (8):
OMAP2: UART: remove set_uart_globals
OMAP clock: Add uart4_ick/fck definitions for 3630
OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs
OMAP3: PM: Add prepare idle and resume idle call for uart4
OMAP3: serial: Fix uart4 handling for 3630
serial: Add OMAP high-speed UART driver
OMAP: SERIAL: Enable omap-serial driver in Kconfig
OMAP3: SERIAL: Initialize all omap-uarts for zoom boards
Grazvydas Ignotas (2):
omap: pandora: add fixed regulator for wlan
omap: pandora: enable twl4030 charger
Hema HK (1):
OMAP: hwmod: Set autoidle after smartidle during _sysc_enable
Igor Grinberg (5):
omap3: Introduce CompuLab CM-T3517 module
omap3: cm-t3517: add support for v3020 rtc
omap3: cm-t3517: add support for usb host
omap3: cm-t3517: add support for NAND flash
omap3: cm-t3517: add support for TI HECC
Janusz Krzysztofik (3):
OMAP1: Add support for SoC camera interface
OMAP1: Amstrad Delta: add support for camera
OMAP1: Amstrad Delta: add camera controlled LEDS trigger
Jarkko Nikula (8):
omap: n8x0: Cleanup i2c1 and menelaus registration
omap: n8x0: Register i2c2 and add board info with tlv320aic3xfor N810
omap: n8x0: Mux i2s codec port pins for McBSP block
omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups
OMAP: McBSP: Fix CLKR and FSR signal muxing
OMAP: McBSP: Swap CLKS source definition
OMAP: McBSP: Remove null omap44xx ops comment
omap: dma: Fix buffering disable bit setting for omap24xx
Jon Hunter (1):
omap3: Prevent SDRC deadlock when L3 is changing frequency
Kevin Hilman (20):
OMAP3: PM: whitespace cleanup around IO wakeup enable
OMAP2+: PM: initial runtime PM core support
OMAP1: PM: add simple runtime PM layer to manage clocks
OMAP: hwmod: separate list locking and hwmod hardware locking
OMAP3: PM: move device-specific special cases from PM core into CPUidle
Revert "OMAP: omap_device: add omap_device_is_valid()"
OMAP: omap_device: make all devices a child of a new parent device
OMAP: GPIO: ensure debounce clocks are disabled during idle/suspend
OMAP2+: defconfig: modularize bluetooth, audio and WLAN
OMAP2+: defconfig: disable CPUfreq
OMAP2/3: UART: add omap_hwmod data for UARTs 1-4
OMAP: UART: omap_device conversions, remove implicit 8520 assumptions
OMAP: UART: don't do automatic bus-level suspend/resume
OMAP: UART: use non-locking versions of hwmod enable/idle functions
Merge branch 'pm-hwmod-wdog' into pm-hwmods
manual merge for pm-hwmod-uart due to conflicts
OMAP3: CPUidle: remove redundant setting of PER next power state
OMAP2: PM: check UART status before trying to idle
OMAP3: PM: fix scratchpad memory accesses for off-mode
omap: UART: fix wakeup registers for OMAP24xx UART2
Kishon Vijay Abraham I (1):
OMAP: omap_device: Fix to support multiple hwmods for a single device
Lennert Buytenhek (1):
update OMAP Kconfig help texts for all supported SoC models
Liam Girdwood (1):
OMAP: hwmod: Fix omap_hwmod_reset wrong state test
Loïc Minier (1):
OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
Madhusudhan Chikkature (1):
OMAP4 ES2: HSMMC soft reset change
Manjunath Kondaiah G (6):
OMAP: mach-omap2: Fix incorrect assignment warnings
OMAP: mach-omap2: Fix static declaration warnings
OMAP2plus: Fix static function warnings
OMAP: mach-omap2: Fix miscellaneous sparse warnings
OMAP: plat-omap: Fix static function warnings
OMAP3: Keypad: Fix incorrect type initializer
Mathieu J. Poirier (1):
omap: Adding beagle i2c eeprom driver to read EDID
Nicolas Kaiser (1):
arm/omap: remove duplicated include
Partha Basak (1):
OMAP: hwmod: Handle opt clocks node using clk_add_alias
Paul Walmsley (14):
OMAP2/3: PRM: add module hard reset support
OMAP: hwmod: add an hardreset API for use by other core code
OMAP: hwmod: improve documentation, clean up function names
OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts
OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC
OMAP2420: CTRL: fix OMAP242X_CTRL_REGADDR macro
OMAP2420: clock: add MCBSP_CLKS node and clkdev aliases
OMAP2430: clock: add MCBSP_CLKS node and clkdev aliases
OMAP3xxx: clock: add clkdev aliases for McBSP fclk source switching
OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
OMAP: McBSP: implement functional clock switching via clock framework
OMAP: split plat-omap/common.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
Peter Ujfalusi (2):
omap: McBSP: Do not enable SRG in slave mode
OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
Rajeev Kulkarni (1):
OMAP4: prcm: Fix global warm reset bit position
Rajendra Nayak (7):
OMAP: hwmod: Enable module wakeup if in smartidle
OMAP4: PM: Declare idle modules as functional too
OMAP4: clocks: Update clock tree for ES2
OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2
OMAP4: PM: Define additional registers for ES2
OMAP4: powerdomain: Update DSS logic state for ES2
omap: hwmod: Handle modules with 16bit registers
Ricardo Salveti de Araujo (1):
omap4: board-omap4panda: adding leds status1 and status2
Robert Nelson (3):
omap: Beagle: revision detection
omap: Beagle: only Cx boards use pin 23 for write protect
omap: Beagle: no gpio_wp pin connection on xM
Sanjeev Premi (2):
omap2: fix assorted compiler warnings
omap2/3: Update revision identification
Santosh Shilimkar (12):
omap: Update and rename common defconfig for omap2plus devices
omap: pm-debug: Move common debug code to pm-debug.c
omap: pm-debug: Enable wakeup_timer_milliseconds debugfs entry
omap: pm: Move set_pwrdm_state routine to common pm.c
omap4: Update id.c and cpu.h for es2.0
omap4: l2x0: Fix init parameter for es2.0
omap4: Fix bootup crash observed with higher CPU clocks
omap4: control: Add ctrl_pad_base to omap_globals
omap4: control: Add accessor api's for pad control module
omap4: control: Add the register definition headers
omap4: control: Fix the control module register accesses
omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
Shubhrajyoti Datta (2):
hmc5843: Digital compass board file
omap: 4430sdp board support for proximity sensor
Subramaniam C.A (1):
omap: i2c: Avoid compilation error in case the header is included multiple times
Sukumar Ghorai (1):
omap: mmc: extended to pass host capabilities from board file
Thara Gopinath (2):
OMAP: PM debugfs removing OMAP3 hardcodings.
OMAP4: pm.c extensions for OMAP4 support
Tim Nordell (4):
ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board support
ARM: OMAP3LOGIC: Adding SDMMC support
ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC
ARM: OMAP3LOGIC: Added SMSC Ethernet board support
Tony Lindgren (20):
omap: Fix CONFIG_LOCAL_TIMERS initialization for multi-omap
omap: Update omap3_defconfig to work with SMP_ON_UP
omap: Update omap3_defconfig for omap2
Merge branch 'hwmod_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linus
Merge branch 'pm-next' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
Merge branch 'pm-runtime' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
Merge branch 'omap_for_2.6.37' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into omap-for-linus
Merge branch 'devel-omap-misc' into omap-for-linus
Merge branch 'misc_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linus
Merge branch 'devel-boards' into omap-for-linus
Merge branch 'devel-omap-smp-on-up' into omap-for-linus
Merge branch 'omap4_and_sdrc_2.6.27' of git://git.pwsan.com/linux-2.6 into omap-for-linus
omap: Fix omap_mux_init_signal not to trash muxname
omap: Keep nwires for omap1 and 2420 MMC controller
Merge branch 'pm-next-2' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
Merge branches 'devel-omap1' and 'devel-omap2plus' into omap-for-linus
Merge branch 'pm-hwmods' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus
omap: Update omap2plus_defconfig to use ttyO instead ttyS
Merge branch 'control_mcbsp_fix_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linus
omap: Fix spotty MMC voltages
Varadarajan, Charulatha (5):
OMAP3: hwmod data: Add watchdog timer
OMAP2420: hwmod data: Add watchdog timer
OMAP2430: hwmod data: Add watchdog timer
OMAP: WDT: Split OMAP1 and OMAP2PLUS device registration
OMAP: WDT: Use PM runtime APIs instead of clk FW APIs
Vasiliy Kulikov (1):
serial: omap-serial: fix signess error
Vikram Pandita (2):
omap: sram: fix is_sram_locked check
omap4: sram: Fix start address
kishore kadiyala (2):
omap4 hsmmc: Register offset handling
omap4 hsmmc: Update ocr mask for MMC2 for regulator to use
matt mooney (1):
arm: remove cast from void*
arch/arm/Kconfig | 2 +-
arch/arm/configs/n8x0_defconfig | 94 --
.../{omap3_defconfig => omap2plus_defconfig} | 51 +-
arch/arm/configs/omap_4430sdp_defconfig | 125 --
arch/arm/configs/omap_generic_2420_defconfig | 37 -
arch/arm/mach-omap1/Makefile | 2 +-
arch/arm/mach-omap1/board-ams-delta.c | 69 +
arch/arm/mach-omap1/board-h2-mmc.c | 3 +-
arch/arm/mach-omap1/board-h3-mmc.c | 3 +-
arch/arm/mach-omap1/board-htcherald.c | 321 +++++-
arch/arm/mach-omap1/board-sx1-mmc.c | 3 +-
arch/arm/mach-omap1/devices.c | 70 +
arch/arm/mach-omap1/include/mach/camera.h | 11 +
arch/arm/mach-omap1/pm_bus.c | 98 ++
arch/arm/mach-omap2/Kconfig | 54 +-
arch/arm/mach-omap2/Makefile | 28 +-
arch/arm/mach-omap2/board-2430sdp.c | 3 +-
arch/arm/mach-omap2/board-3430sdp.c | 12 +-
arch/arm/mach-omap2/board-3630sdp.c | 3 +-
arch/arm/mach-omap2/board-4430sdp.c | 87 ++-
arch/arm/mach-omap2/board-am3517evm.c | 7 +-
arch/arm/mach-omap2/board-apollon.c | 2 +-
arch/arm/mach-omap2/board-cm-t35.c | 9 +-
arch/arm/mach-omap2/board-cm-t3517.c | 292 ++++
arch/arm/mach-omap2/board-devkit8000.c | 7 +-
arch/arm/mach-omap2/board-flash.c | 3 +-
.../mach-omap2/{include/mach => }/board-flash.h | 2 +
arch/arm/mach-omap2/board-generic.c | 16 +-
arch/arm/mach-omap2/board-h4.c | 2 +-
arch/arm/mach-omap2/board-igep0020.c | 369 ++++--
arch/arm/mach-omap2/board-igep0030.c | 400 ++++++
arch/arm/mach-omap2/board-ldp.c | 8 +-
arch/arm/mach-omap2/board-n8x0.c | 65 +-
arch/arm/mach-omap2/board-omap3beagle.c | 106 ++-
arch/arm/mach-omap2/board-omap3evm.c | 9 +-
arch/arm/mach-omap2/board-omap3logic.c | 241 ++++
arch/arm/mach-omap2/board-omap3pandora.c | 53 +-
arch/arm/mach-omap2/board-omap3stalker.c | 9 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 7 +-
arch/arm/mach-omap2/board-omap4panda.c | 109 ++-
arch/arm/mach-omap2/board-overo.c | 5 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +-
arch/arm/mach-omap2/board-rx51-sdram.c | 2 +-
arch/arm/mach-omap2/board-rx51-video.c | 2 +
arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 10 +-
arch/arm/mach-omap2/board-zoom2.c | 1 +
arch/arm/mach-omap2/board-zoom3.c | 1 +
arch/arm/mach-omap2/clock.c | 2 +-
arch/arm/mach-omap2/clock2420_data.c | 42 +-
arch/arm/mach-omap2/clock2430_data.c | 66 +-
arch/arm/mach-omap2/clock3xxx_data.c | 36 +-
arch/arm/mach-omap2/clock44xx_data.c | 1444 ++++++++++++--------
arch/arm/mach-omap2/clockdomain.c | 110 +--
arch/arm/mach-omap2/cm-regbits-34xx.h | 2 +
arch/arm/mach-omap2/cm-regbits-44xx.h | 1287 +++++++++---------
arch/arm/mach-omap2/cm44xx.h | 90 ++-
arch/arm/mach-omap2/cm4xxx.c | 9 +-
arch/arm/mach-omap2/common.c | 135 ++
arch/arm/mach-omap2/control.c | 33 +-
.../include/plat => mach-omap2}/control.h | 49 +-
arch/arm/mach-omap2/cpuidle34xx.c | 58 +-
arch/arm/mach-omap2/devices.c | 198 +++-
arch/arm/mach-omap2/gpmc-smsc911x.c | 113 ++
arch/arm/mach-omap2/hsmmc.c | 92 +-
arch/arm/mach-omap2/hsmmc.h | 3 +-
arch/arm/mach-omap2/id.c | 115 ++-
arch/arm/mach-omap2/include/mach/board-rx51.h | 11 +
arch/arm/mach-omap2/include/mach/board-zoom.h | 4 -
.../include/mach/ctrl_module_core_44xx.h | 391 ++++++
.../include/mach/ctrl_module_pad_core_44xx.h | 1409 +++++++++++++++++++
.../include/mach/ctrl_module_pad_wkup_44xx.h | 236 ++++
.../include/mach/ctrl_module_wkup_44xx.h | 92 ++
arch/arm/mach-omap2/io.c | 8 +-
arch/arm/mach-omap2/io.h | 7 +
arch/arm/mach-omap2/irq.c | 1 -
arch/arm/mach-omap2/mailbox.c | 8 +-
arch/arm/mach-omap2/mcbsp.c | 105 +-
arch/arm/mach-omap2/mux.c | 23 +-
arch/arm/mach-omap2/mux.h | 2 +-
arch/arm/mach-omap2/mux2420.c | 2 +-
arch/arm/mach-omap2/mux2430.c | 2 +-
arch/arm/mach-omap2/mux34xx.c | 12 +-
arch/arm/mach-omap2/omap4-common.c | 10 +-
arch/arm/mach-omap2/omap_hwmod.c | 599 +++++++--
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 257 ++++
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 257 ++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 319 +++++-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 850 ++++++++++++
arch/arm/mach-omap2/pm-debug.c | 44 +-
arch/arm/mach-omap2/pm.c | 75 +-
arch/arm/mach-omap2/pm.h | 11 +-
arch/arm/mach-omap2/pm24xx.c | 4 +-
arch/arm/mach-omap2/pm34xx.c | 126 +--
arch/arm/mach-omap2/pm_bus.c | 85 ++
arch/arm/mach-omap2/powerdomains44xx.h | 2 +-
arch/arm/mach-omap2/prcm-common.h | 5 +
arch/arm/mach-omap2/prcm.c | 33 +-
arch/arm/mach-omap2/prm-regbits-34xx.h | 1 +
arch/arm/mach-omap2/prm-regbits-44xx.h | 1314 ++++++++++--------
arch/arm/mach-omap2/prm.h | 18 +-
arch/arm/mach-omap2/prm2xxx_3xxx.c | 110 ++
arch/arm/mach-omap2/prm44xx.c | 116 ++
arch/arm/mach-omap2/prm44xx.h | 14 +-
arch/arm/mach-omap2/serial.c | 578 ++++----
arch/arm/mach-omap2/sleep34xx.S | 2 +-
arch/arm/mach-omap2/sram34xx.S | 6 +-
arch/arm/mach-omap2/timer-gp.c | 8 +-
.../include/plat => mach-omap2}/timer-gp.h | 3 +-
arch/arm/mach-omap2/usb-fs.c | 6 +-
arch/arm/plat-omap/Kconfig | 2 +-
arch/arm/plat-omap/Makefile | 4 +-
arch/arm/plat-omap/clock.c | 5 +-
arch/arm/plat-omap/common.c | 290 ----
arch/arm/plat-omap/counter_32k.c | 183 +++
arch/arm/plat-omap/cpu-omap.c | 4 +-
arch/arm/plat-omap/devices.c | 42 -
arch/arm/plat-omap/dma.c | 50 +-
arch/arm/plat-omap/dmtimer.c | 2 +-
arch/arm/plat-omap/fb.c | 2 +
arch/arm/plat-omap/fb.h | 10 +
arch/arm/plat-omap/gpio.c | 10 +-
arch/arm/plat-omap/include/plat/common.h | 5 +-
arch/arm/plat-omap/include/plat/cpu.h | 41 +-
arch/arm/plat-omap/include/plat/dma.h | 6 +
arch/arm/plat-omap/include/plat/dmtimer.h | 2 +
arch/arm/plat-omap/include/plat/gpmc-smsc911x.h | 35 +
arch/arm/plat-omap/include/plat/i2c.h | 4 +
arch/arm/plat-omap/include/plat/irqs.h | 2 +
arch/arm/plat-omap/include/plat/mcbsp.h | 22 +
arch/arm/plat-omap/include/plat/mmc.h | 12 +-
arch/arm/plat-omap/include/plat/omap-serial.h | 128 ++
arch/arm/plat-omap/include/plat/omap24xx.h | 2 +-
arch/arm/plat-omap/include/plat/omap_device.h | 4 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 62 +-
arch/arm/plat-omap/include/plat/powerdomain.h | 2 +
arch/arm/plat-omap/include/plat/prcm.h | 2 +
arch/arm/plat-omap/include/plat/sdrc.h | 1 +
arch/arm/plat-omap/include/plat/sram.h | 1 -
arch/arm/plat-omap/include/plat/uncompress.h | 5 +
arch/arm/plat-omap/include/plat/usb.h | 2 +-
arch/arm/plat-omap/mcbsp.c | 26 +-
arch/arm/plat-omap/omap_device.c | 110 +-
arch/arm/plat-omap/sram.c | 37 +-
arch/arm/plat-omap/sram.h | 6 +
drivers/mmc/host/omap_hsmmc.c | 43 +-
drivers/serial/Kconfig | 27 +
drivers/serial/Makefile | 1 +
drivers/serial/omap-serial.c | 1333 ++++++++++++++++++
drivers/usb/gadget/omap_udc.c | 18 +-
drivers/watchdog/omap_wdt.c | 42 +-
include/linux/serial_core.h | 3 +
sound/soc/omap/omap-mcbsp.c | 119 +--
sound/soc/omap/omap-mcpdm.c | 1 -
154 files changed, 12794 insertions(+), 3788 deletions(-)
delete mode 100644 arch/arm/configs/n8x0_defconfig
rename arch/arm/configs/{omap3_defconfig => omap2plus_defconfig} (90%)
delete mode 100644 arch/arm/configs/omap_4430sdp_defconfig
delete mode 100644 arch/arm/configs/omap_generic_2420_defconfig
create mode 100644 arch/arm/mach-omap1/include/mach/camera.h
create mode 100644 arch/arm/mach-omap1/pm_bus.c
create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c
rename arch/arm/mach-omap2/{include/mach => }/board-flash.h (88%)
create mode 100644 arch/arm/mach-omap2/board-igep0030.c
create mode 100644 arch/arm/mach-omap2/board-omap3logic.c
create mode 100644 arch/arm/mach-omap2/common.c
rename arch/arm/{plat-omap/include/plat => mach-omap2}/control.h (92%)
create mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.c
create mode 100644 arch/arm/mach-omap2/include/mach/board-rx51.h
create mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
create mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
create mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
create mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
create mode 100644 arch/arm/mach-omap2/io.h
create mode 100644 arch/arm/mach-omap2/omap_hwmod_44xx_data.c
create mode 100644 arch/arm/mach-omap2/pm_bus.c
create mode 100644 arch/arm/mach-omap2/prm2xxx_3xxx.c
create mode 100644 arch/arm/mach-omap2/prm44xx.c
rename arch/arm/{plat-omap/include/plat => mach-omap2}/timer-gp.h (86%)
create mode 100644 arch/arm/plat-omap/counter_32k.c
create mode 100644 arch/arm/plat-omap/fb.h
create mode 100644 arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
create mode 100644 arch/arm/plat-omap/include/plat/omap-serial.h
create mode 100644 arch/arm/plat-omap/sram.h
create mode 100644 drivers/serial/omap-serial.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists