[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4CCAFA68.2030903@hartkopp.net>
Date: Fri, 29 Oct 2010 18:46:32 +0200
From: Oliver Hartkopp <socketcan@...tkopp.net>
To: Marc Kleine-Budde <mkl@...gutronix.de>,
Tomoya <tomoya-linux@....okisemi.com>
CC: Wolfgang Grandegger <wg@...ndegger.com>,
"David S. Miller" <davem@...emloft.net>,
Wolfram Sang <w.sang@...gutronix.de>,
Christian Pellegrin <chripell@...e.org>,
Barry Song <21cnbao@...il.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
socketcan-core@...ts.berlios.de, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, andrew.chih.howe.khor@...el.com,
qi.wang@...el.com, margie.foster@...el.com, yong.y.wang@...el.com,
Masayuki Ohtake <masa-korg@....okisemi.com>,
kok.howg.ewe@...el.com, joel.clark@...el.com
Subject: Re: [PATCH net-next-2.6 v2] can: Topcliff: PCH_CAN driver: Fix build
warnings
On 29.10.2010 14:57, Marc Kleine-Budde wrote:
> Hello,
>
> On 10/29/2010 12:37 PM, Tomoya wrote:
>>>> If you figured out how to use the endianess conversion functions from
>>>> the cpu_to_{le,be}-{le,to}_to_cpup family use them here, too.
>
>> Sorry, I misunderstood the spec of Topcliff CAN endianess.
>> I have understood endianess conversion is not necessary.
>> (CAN data is set as Big-Endian in Topcliff CAN register)
>
>>> You have to change the definition of the regs struct a bit:
>>>> u32 if1_mcont;
>>>> u32 if1_data[4];
>>>> u32 reserve2;
>> Uh, I can't find this. Where is this ?
>
> Here's a patch to illustrate what I meant:
>
> diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
> index 55ec324..5ee7589 100644
> --- a/drivers/net/can/pch_can.c
> +++ b/drivers/net/can/pch_can.c
> @@ -150,10 +150,7 @@ struct pch_can_regs {
> u32 if1_id1;
> u32 if1_id2;
> u32 if1_mcont;
> - u32 if1_dataa1;
> - u32 if1_dataa2;
> - u32 if1_datab1;
> - u32 if1_datab2;
> + u32 if1_data[4];
> u32 reserve2;
> u32 reserve3[12];
> u32 if2_creq;
>
Indeed the access to the data registers does not seem to be endian aware.
See in pch_can_rx_normal():
+ cf->can_dlc = get_can_dlc((ioread32(&priv->regs->
+ if1_mcont)) & 0xF);
+ *(u16 *)(cf->data + 0) = ioread16(&priv->regs->
+ if1_dataa1);
+ *(u16 *)(cf->data + 2) = ioread16(&priv->regs->
+ if1_dataa2);
+ *(u16 *)(cf->data + 4) = ioread16(&priv->regs->
+ if1_datab1);
+ *(u16 *)(cf->data + 6) = ioread16(&priv->regs->
+ if1_datab2);
See in pch_xmit():
+ /* Copy data to register */
+ if (cf->can_dlc > 0) {
+ u32 data1 = *((u16 *)&cf->data[0]);
+ iowrite32(data1, &priv->regs->if2_dataa1);
+ }
+ if (cf->can_dlc > 2) {
+ u32 data1 = *((u16 *)&cf->data[2]);
+ iowrite32(data1, &priv->regs->if2_dataa2);
+ }
+ if (cf->can_dlc > 4) {
+ u32 data1 = *((u16 *)&cf->data[4]);
+ iowrite32(data1, &priv->regs->if2_datab1);
+ }
+ if (cf->can_dlc > 6) {
+ u32 data1 = *((u16 *)&cf->data[6]);
+ iowrite32(data1, &priv->regs->if2_datab2);
+ }
+
It's just a question if the driver for an Intel Chipset should/could ignore
the endian problematic.
If this is intended the driver should only appear in Kconfig depending on X86
or little endian systems.
Besides this remark, the struct pch_can_regs could also be defined in a way
that every single CAN payload data byte could be accessed directly to allow
e.g. this code in pch_can_rx_normal():
cf->data[0] = ioread8(&priv->regs->if1_data0);
cf->data[1] = ioread8(&priv->regs->if1_data1);
cf->data[2] = ioread8(&priv->regs->if1_data2);
(..)
cf->data[6] = ioread8(&priv->regs->if1_data6);
cf->data[7] = ioread8(&priv->regs->if1_data7);
This is easy to understand and additionally endian aware.
In opposite to this:
+ if (cf->can_dlc > 2) {
+ u32 data1 = *((u16 *)&cf->data[2]);
+ iowrite32(data1, &priv->regs->if2_dataa2);
+ }
Which puts a little? endian u16 into the big endian register layout.
Sorry i'm just getting curious on this register access implementation.
Regards,
Oliver
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists