[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1288625887-30303-2-git-send-email-tlinder@codeaurora.org>
Date: Mon, 1 Nov 2010 17:38:04 +0200
From: Tatyana Brokhman <tlinder@...eaurora.org>
To: linux-usb@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org,
Tatyana Brokhman <tlinder@...eaurora.org>,
Greg Kroah-Hartman <gregkh@...e.de>,
Alan Stern <stern@...land.harvard.edu>,
Sarah Sharp <sarah.a.sharp@...ux.intel.com>,
Jacob Pan <jacob.jun.pan@...el.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v4 1/3] usb: USB3.0 ch11 definitions
Adding hub SuperSpeed usb definitions as defined by ch10 of the USB3.0
spec.
Signed-off-by: tlinder <tlinder@...eaurora.org>
---
include/linux/usb/ch11.h | 47 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/usb/hcd.h | 4 +++
2 files changed, 51 insertions(+), 0 deletions(-)
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 119194c..10ec069 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -28,6 +28,13 @@
#define HUB_STOP_TT 11
/*
+ * Hub class additional requests defined by USB 3.0 spec
+ * See USB 3.0 spec Table 10-6
+ */
+#define HUB_SET_DEPTH 12
+#define HUB_GET_PORT_ERR_COUNT 13
+
+/*
* Hub Class feature numbers
* See USB 2.0 spec Table 11-17
*/
@@ -56,6 +63,20 @@
#define USB_PORT_FEAT_C_PORT_L1 23
/*
+ * Port feature selectors added by USB 3.0 spec.
+ * See USB 3.0 spec Table 10-7
+ */
+#define USB_PORT_FEAT_LINK_STATE 5
+#define USB_PORT_FEAT_U1_TIMEOUT 23
+#define USB_PORT_FEAT_U2_TIMEOUT 24
+#define USB_PORT_FEAT_C_LINK_STATE 25
+#define USB_PORT_FEAT_C_CONFIG_ERR 26
+#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
+#define USB_PORT_FEAT_BH_PORT_RESET 28
+#define USB_PORT_FEAT_C_BH_PORT_RESET 29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
+
+/*
* Hub Status and Hub Change results
* See USB 2.0 spec Table 11-19 and Table 11-20
*/
@@ -84,6 +105,32 @@ struct usb_port_status {
#define USB_PORT_STAT_SUPER_SPEED 0x8000 /* Linux-internal */
/*
+ * Additions to wPortStatus bit field from USB 3.0
+ * See USB 3.0 spec Table 10-10
+ */
+#define USB_PORT_STAT_LINK_STATE 0x01e0
+#define USB_SS_PORT_STAT_POWER 0x0200
+#define USB_PORT_STAT_SPEED_5GBPS 0x0000
+/* Valid only if port is enabled */
+
+/*
+ * Definitions for PORT_LINK_STATE values
+ * (bits 5-8) in wPortStatus
+ */
+#define USB_SS_PORT_LS_U0 0x0000
+#define USB_SS_PORT_LS_U1 0x0020
+#define USB_SS_PORT_LS_U2 0x0040
+#define USB_SS_PORT_LS_U3 0x0060
+#define USB_SS_PORT_LS_SS_DISABLED 0x0080
+#define USB_SS_PORT_LS_RX_DETECT 0x00a0
+#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0
+#define USB_SS_PORT_LS_POLLING 0x00e0
+#define USB_SS_PORT_LS_RECOVERY 0x0100
+#define USB_SS_PORT_LS_HOT_RESET 0x0120
+#define USB_SS_PORT_LS_COMP_MOD 0x0140
+#define USB_SS_PORT_LS_LOOPBACK 0x0160
+
+/*
* wPortChange bit field
* See USB 2.0 spec Table 11-22
* Bits 0 to 4 shown, bits 5 to 15 are reserved
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 3b571f1..d7738de 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -469,6 +469,10 @@ extern void usb_ep0_reinit(struct usb_device *);
/*-------------------------------------------------------------------------*/
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth (0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
+
/*
* Generic bandwidth allocation constants/support
*/
--
1.6.3.3
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists