linux-kernel - [HELP] kernel hanging when boot after nash-hotplug in vmware

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [day] [month] [year] [list]

Date:	Mon, 1 Nov 2010 14:09:28 +0800
From:	jovi zhang <bookjovi@...il.com>
To:	linux-kernel@...r.kernel.org
Subject: [HELP] kernel hanging when boot after nash-hotplug in vmware

Hi,
   I'm upgading fc12 to lastest kernel(2.6.36 mainline) in my vmware
invironment, but kernel hanging after screen display nash-hotplug,
like below:

Write protecting the kernel text: 3744k
Write protecting the kernel read-only data: 1808k
nash-hotplug (46): /proc/46/oom_adj is deprecated, please use
/proc/46/oom_score_adj instead.

then hanging there.
I compiled lastest kernel using i386 defconfig.

I compared this boot message with normal boot message. normal boot
message is like this:

Write protecting the kernel text: 3744k
Write protecting the kernel read-only data: 1808k
nash-hotplug (46): /proc/46/oom_adj is deprecated, please use
/proc/46/oom_score_adj instead.
pci 0000:00:10.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@...delion.com>
scsi2: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi2:   Firmware Version: 5.07B, I/O Address: 0x10C0, IRQ Channel: 17/Level
scsi2:   PCI Bus: 0, Device: 16, Address: 0xD8800000, Host Adapter SCSI ID: 7
scsi2:   Parity Checking: Enabled, Extended Translation: Enabled
scsi2:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi2:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi2:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi2:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi2:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi2: *** BusLogic BT-958 Initialized Successfully ***
scsi2 : BusLogic BT-958
scsi 2:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
sd 2:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 5d 00 00 00
sd 2:0:0:0: [sda] Cache data unavailable
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Cache data unavailable
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 2:0:0:0: [sda] Cache data unavailable
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI disk

I know this problem maybe caused by kernel configuation, maybe I miss
some item in my config.txt in this case.
so who can help me to solve this problem? Thanks very much

.jovi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/