linux-kernel - Re: [PATCH] x86-64: more fixes and cleanup to AMD Fam10 MMCONF enabling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4CD4443F.8000008@kernel.org>
Date:	Fri, 05 Nov 2010 10:51:59 -0700
From:	Yinghai Lu <yinghai@...nel.org>
To:	Jan Beulich <JBeulich@...ell.com>
CC:	mingo@...e.hu, tglx@...utronix.de, hpa@...or.com,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] x86-64: more fixes and cleanup to AMD Fam10 MMCONF	 enabling

On 11/05/2010 03:59 AM, Jan Beulich wrote:
> Unfortunately it turned out the original code had more issues: We want
> to place the region above 4G in any case (even if TOM2 isn't enabled
> or invalid), and the base mask definition was improperly typed (thus
> causing shifts by FAM10H_MMIO_CONF_BASE_SHIFT to produce other than
> the intended result). Fixing this in turn allowed simplifying the MMIO
> region detection code, as regions ending below TOM2 now aren't of
> interest anymore.
> 
> This will only apply cleanly on top of yesterday's patch titled
> "x86-64: fix and clean up AMD Fam10 MMCONF enabling".

I don't think we have systems that have Enable bit set, but TOM2 < 4G.

Thanks

	Yinghai

> 
> Signed-off-by: Jan Beulich <jbeulich@...ell.com>
> Cc: Yinghai Lu <yinghai@...nel.org>
> 
> ---
>  arch/x86/include/asm/msr-index.h   |    2 +-
>  arch/x86/kernel/mmconf-fam10h_64.c |   12 ++++++------
>  2 files changed, 7 insertions(+), 7 deletions(-)
> 
> --- 2.6.37-rc1/arch/x86/include/asm/msr-index.h
> +++ 2.6.37-rc1-x86_64-mmconf-fam10h/arch/x86/include/asm/msr-index.h
> @@ -128,7 +128,7 @@
>  #define FAM10H_MMIO_CONF_ENABLE		(1<<0)
>  #define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
>  #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
> -#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
> +#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
>  #define FAM10H_MMIO_CONF_BASE_SHIFT	20
>  #define MSR_FAM10H_NODE_ID		0xc001100c
>  
> --- 2.6.37-rc1-x86_64-mmconf-fam10h.orig/arch/x86/kernel/mmconf-fam10h_64.c
> +++ 2.6.37-rc1-x86_64-mmconf-fam10h/arch/x86/kernel/mmconf-fam10h_64.c
> @@ -43,7 +43,7 @@ static int __cpuinit cmp_range(const voi
>  	return start1 - start2;
>  }
>  
> -#define UNIT (1ULL << (5 + 3 + 12))
> +#define UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
>  #define MASK (~(UNIT - 1))
>  #define SIZE (UNIT << 8)
>  /* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
> @@ -99,12 +99,12 @@ static void __cpuinit get_fam10h_pci_mmc
>  
>  	/* TOP_MEM2 is not enabled? */
>  	if (!(val & (1<<21))) {
> -		tom2 = 0;
> +		tom2 = 1ULL << 32;
>  	} else {
>  		/* TOP_MEM2 */
>  		address = MSR_K8_TOP_MEM2;
>  		rdmsrl(address, val);
> -		tom2 = val & 0xffffff800000ULL;
> +		tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
>  	}
>  
>  	if (base <= tom2)
> @@ -127,7 +127,7 @@ static void __cpuinit get_fam10h_pci_mmc
>  		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
>  		end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
>  
> -		if (!end)
> +		if (end < tom2)
>  			continue;
>  
>  		range[hi_mmio_num].start = start;
> @@ -151,13 +151,13 @@ static void __cpuinit get_fam10h_pci_mmc
>  	if ((base > tom2) && BASE_VALID(base))
>  		goto out;
>  	base = (range[hi_mmio_num - 1].end + UNIT) & MASK;
> -	if ((base > tom2) && BASE_VALID(base))
> +	if (BASE_VALID(base))
>  		goto out;
>  	/* need to find window between ranges */
>  	for (i = 1; i < hi_mmio_num; i++) {
>  		base = (range[i - 1].end + UNIT) & MASK;
>  		val = range[i].start & MASK;
> -		if (val >= base + SIZE && base > tom2 && BASE_VALID(base))
> +		if (val >= base + SIZE && BASE_VALID(base))
>  			goto out;
>  	}
>  	return;
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/