linux-kernel - Re: error in dmesg

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AANLkTi=bkzZd0c+kM4ZsQ-y0xmMedfB5AhTS+4ohen_P@mail.gmail.com>
Date:	Wed, 10 Nov 2010 00:30:07 +0100
From:	Sasa Ostrouska <casaxa@...il.com>
To:	linux-kernel@...r.kernel.org
Subject: Re: error in dmesg

Sorry, I forgot to mntion that thi is on a 2.6.33.4 slackware 64bit linux.


On Wed, Nov 10, 2010 at 12:26 AM, Sasa Ostrouska <casaxa@...il.com> wrote:
> Hi I get this eror during boot on my machine:
>
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> ata1: softreset failed (device not ready)
> ata3: softreset failed (device not ready)
> ata3: applying SB600 PMP SRST workaround and retrying
> ata1: applying SB600 PMP SRST workaround and retrying
> usb 1-1: New USB device found, idVendor=0424, idProduct=2502
> usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> hub 1-1:1.0: USB hub found
> hub 1-1:1.0: 2 ports detected
> irq 16: nobody cared (try booting with the "irqpoll" option)
> Pid: 0, comm: swapper Not tainted 2.6.33.4 #3
> Call Trace:
>  <IRQ>  [<ffffffff81098d3b>] __report_bad_irq+0x2b/0xa0
>  [<ffffffff81098f3c>] note_interrupt+0x18c/0x1d0
>  [<ffffffff8106c54b>] ? sched_clock_tick+0x5b/0x90
>  [<ffffffff8109961d>] handle_fasteoi_irq+0xbd/0xf0
>  [<ffffffff81005ab2>] handle_irq+0x22/0x30
>  [<ffffffff81a0347c>] do_IRQ+0x6c/0xf0
>  [<ffffffff81a02f93>] ret_from_intr+0x0/0xa
>  <EOI>  [<ffffffff8100c058>] ? default_idle+0x38/0x80
>  [<ffffffff8100c123>] c1e_idle+0x83/0x100
>  [<ffffffff8106b3da>] ? atomic_notifier_call_chain+0x1a/0x20
>  [<ffffffff8100155d>] cpu_idle+0xad/0x100
>  [<ffffffff819fb727>] start_secondary+0x17b/0x17f
> handlers:
> [<ffffffff81865420>] (usb_hcd_irq+0x0/0x70)
> Disabling IRQ #16
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
> ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: configured for UDMA/133
> ata1.00: ATA-8: WDC WD3200AAKS-00YGA0, 12.01C02, max UDMA/133
> ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> usb 5-2: new low speed USB device using ohci_hcd and address 2
> ata2: softreset failed (device not ready)
> ata2: applying SB600 PMP SRST workaround and retrying
> usb 5-2: New USB device found, idVendor=413c, idProduct=3016
> usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> usb 5-2: Product: Dell Premium USB Optical Mouse
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI: Optiarc DVD RW AD-7191S, 1.01, max UDMA/100
> ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata2.00: configured for UDMA/100
> scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7191S  1.01 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
> sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> sd 2:0:0:0: [sdb] Write Protect is off
> sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sdb: sdb1
> sd 2:0:0:0: [sdb] Attached SCSI disk
> irq 17: nobody cared (try booting with the "irqpoll" option)
> Pid: 0, comm: swapper Not tainted 2.6.33.4 #3
> Call Trace:
>  <IRQ>  [<ffffffff81098d3b>] __report_bad_irq+0x2b/0xa0
>  [<ffffffff81098f3c>] note_interrupt+0x18c/0x1d0
>  [<ffffffff8106c54b>] ? sched_clock_tick+0x5b/0x90
>  [<ffffffff8109961d>] handle_fasteoi_irq+0xbd/0xf0
>  [<ffffffff81005ab2>] handle_irq+0x22/0x30
>  [<ffffffff81a0347c>] do_IRQ+0x6c/0xf0
>  [<ffffffff81a02f93>] ret_from_intr+0x0/0xa
>  <EOI>  [<ffffffff8100c058>] ? default_idle+0x38/0x80
>  [<ffffffff8100c123>] c1e_idle+0x83/0x100
>  [<ffffffff8106b3da>] ? atomic_notifier_call_chain+0x1a/0x20
>  [<ffffffff8100155d>] cpu_idle+0xad/0x100
>  [<ffffffff819fb727>] start_secondary+0x17b/0x17f
> handlers:
> [<ffffffff81865420>] (usb_hcd_irq+0x0/0x70)
> [<ffffffff81865420>] (usb_hcd_irq+0x0/0x70)
> Disabling IRQ #17
> registered taskstats version 1
> md: Waiting for all devices to be available before autodetect
> md: If you don't use raid, use raid=noautodetect
> md: Autodetecting RAID arrays.
> md: Scanned 0 and added 0 devices.
> md: autorun ...
> md: ... autorun DONE.
>
>
> Whats going wrong ?
>
> Rgds
> Saxa
>
> PS: CC me since I'm not on the list.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/