Linux version 2.6.37-rc2-00001-g9984b1f (scorpion@mac) (gcc version 4.4.5 (Debian 4.4.5-8) ) #5 SMP Tue Nov 16 09:27:33 CET 2010 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-rc2-00001-g9984b1f root=/dev/sda4 ro i915.modeset=1 gpt BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS) BIOS-e820: 0000000000090000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000be0c5000 (usable) BIOS-e820: 00000000be0c5000 - 00000000be2c6000 (ACPI NVS) BIOS-e820: 00000000be2c6000 - 00000000bee4b000 (usable) BIOS-e820: 00000000bee4b000 - 00000000bee71000 (unusable) BIOS-e820: 00000000bee71000 - 00000000bee80000 (usable) BIOS-e820: 00000000bee80000 - 00000000beeab000 (reserved) BIOS-e820: 00000000beeab000 - 00000000beeb7000 (usable) BIOS-e820: 00000000beeb7000 - 00000000beebc000 (ACPI data) BIOS-e820: 00000000beebc000 - 00000000beebe000 (usable) BIOS-e820: 00000000beebe000 - 00000000beeef000 (ACPI NVS) BIOS-e820: 00000000beeef000 - 00000000beeff000 (ACPI data) BIOS-e820: 00000000beeff000 - 00000000bef00000 (reserved) BIOS-e820: 00000000e00f8000 - 00000000e00f9000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fffb0000 - 00000000fffe0000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Mac-F4208EAA/Macmini2,1, BIOS MM21.88Z.009A.B00.0706281359 06/28/07 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0xbeebe max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFE00000 mask FFFE00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 080000000 mask FC0000000 write-back 3 base 0BF000000 mask FFF000000 uncachable 4 base 000000000 mask F80000000 write-back 5 base 080000000 mask FC0000000 write-back 6 base 0BEF00000 mask FFFF00000 uncachable 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000beebe000 0000000000 - 00bee00000 page 2M 00bee00000 - 00beebe000 page 4k kernel direct mapping tables up to beebe000 @ 1fffb000-20000000 ACPI: RSDP 000000000009fc10 00024 (v02 APPLE ) ACPI: XSDT 00000000beefd1c0 00074 (v01 APPLE Apple00 0000009A 01000013) ACPI: FACP 00000000beefb000 000F4 (v03 APPLE Apple00 0000009A Loki 0000005F) ACPI: DSDT 00000000beef0000 0384E (v01 APPLE Macmini 00020001 INTL 20050309) ACPI: FACS 00000000beec0000 00040 ACPI: HPET 00000000beefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 00000000beef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 00000000beef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 00000000beef7000 000A0 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 00000000beef5000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 00000000beef4000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 00000000beebb000 0064F (v01 APPLE SataPri 00001000 INTL 20050309) ACPI: SSDT 00000000beeba000 0069C (v01 APPLE SataSec 00001000 INTL 20050309) ACPI: SSDT 00000000beeef000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800ba800000-ffff8800bd1fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000010 -> 0x0000008f 0: 0x00000090 -> 0x000000a0 0: 0x00000100 -> 0x000be0c5 0: 0x000be2c6 -> 0x000bee4b 0: 0x000bee71 -> 0x000bee80 0: 0x000beeab -> 0x000beeb7 0: 0x000beebc -> 0x000beebe On node 0 totalpages: 781302 DMA zone: 56 pages used for memmap DMA zone: 7 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 10636 pages used for memmap DMA32 zone: 766683 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at bef00000 (gap: bef00000:211f8000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff8800bde00000 s73472 r8192 d20736 u1048576 pcpu-alloc: s73472 r8192 d20736 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770603 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-rc2-00001-g9984b1f root=/dev/sda4 ro i915.modeset=1 gpt PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Memory: 3068304k/3128056k available (4583k kernel code, 2848k absent, 56904k reserved, 1819k data, 432k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:320 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1999.575 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.78 BogoMIPS (lpj=6665250) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20101013 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (8002.37 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000beeb8c10 0026C (v01 APPLE Cpu0Ist 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0026C (v01 APPLE Cpu0Ist 00003000 INTL 20050309) ACPI: SSDT 00000000beeb7c90 00232 (v01 APPLE Cpu0Cst 00003001 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00232 (v01 APPLE Cpu0Cst 00003001 INTL 20050309) ACPI: SSDT 00000000beeb8f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) ACPI: SSDT 00000000beeb7f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600 pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xd0380000-0xd03fffff] pci 0000:00:02.0: reg 14: [io 0x20f0-0x20f7] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xd0400000-0xd043ffff] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xd0300000-0xd037ffff] pci 0000:00:07.0: [8086:27a3] type 0 class 0x001101 pci 0000:00:07.0: reg 10: [mem 0xd0444000-0xd0444fff] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xd0440000-0xd0443fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x20a0-0x20bf] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x2080-0x209f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x2060-0x207f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x2040-0x205f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xd0445400-0xd04457ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x20e8-0x20ef] pci 0000:00:1f.1: reg 14: [io 0x2104-0x2107] pci 0000:00:1f.1: reg 18: [io 0x20e0-0x20e7] pci 0000:00:1f.1: reg 1c: [io 0x2100-0x2103] pci 0000:00:1f.1: reg 20: [io 0x20c0-0x20cf] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x20d8-0x20df] pci 0000:00:1f.2: reg 14: [io 0x20fc-0x20ff] pci 0000:00:1f.2: reg 18: [io 0x20d0-0x20d7] pci 0000:00:1f.2: reg 1c: [io 0x20f8-0x20fb] pci 0000:00:1f.2: reg 20: [io 0x2020-0x202f] pci 0000:00:1f.2: reg 24: [mem 0xd0445000-0xd04453ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:01:00.0: [11ab:4362] type 0 class 0x000200 pci 0000:01:00.0: reg 10: [mem 0xd0200000-0xd0203fff 64bit] pci 0000:01:00.0: reg 18: [io 0x1000-0x10ff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd02fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: [168c:001c] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:03.0: [11c1:5811] type 0 class 0x000c00 pci 0000:03:03.0: reg 10: [mem 0xd0000000-0xd0000fff] pci 0000:03:03.0: supports D1 D2 pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000008f000 - 000000000008ffff reserve RAM buffer: 00000000be0c5000 - 00000000bfffffff reserve RAM buffer: 00000000bee4b000 - 00000000bfffffff reserve RAM buffer: 00000000bee80000 - 00000000bfffffff reserve RAM buffer: 00000000beeb7000 - 00000000bfffffff reserve RAM buffer: 00000000beebe000 - 00000000bfffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0xc0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xe0000000-0xefffffff] pnp 00:01: [mem 0xfed14000-0xfed17fff] pnp 00:01: [mem 0xfed18000-0xfed18fff] pnp 00:01: [mem 0xfed19000-0xfed19fff] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xfed20000-0xfed8ffff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0300-0x031f] pnp 00:02: [irq 6] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active) pnp 00:03: [io 0x0000-0x001f] pnp 00:03: [io 0x0081-0x0091] pnp 00:03: [io 0x0093-0x009f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [mem 0xff000000-0xffffffff] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:05: [irq 0 disabled] pnp 00:05: [irq 8] pnp 00:05: [mem 0xfed00000-0xfed003ff] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:06: [io 0x00f0] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x002e-0x002f] pnp 00:07: [io 0x004e-0x004f] pnp 00:07: [io 0x0061] pnp 00:07: [io 0x0063] pnp 00:07: [io 0x0065] pnp 00:07: [io 0x0067] pnp 00:07: [io 0x0070] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0092] pnp 00:07: [io 0x00b2-0x00b3] pnp 00:07: [io 0x0680-0x06ef] pnp 00:07: [io 0x0800-0x080f] pnp 00:07: [io 0x0810-0x0817] pnp 00:07: [io 0x0400-0x047f] pnp 00:07: [io 0x0500-0x053f] pnp 00:07: [io 0x1640-0x164f] pnp 00:07: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io 0x1000-0x1fff] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [io 0x0070-0x0077] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved system 00:07: [io 0x0680-0x06ef] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x0810-0x0817] has been reserved system 00:07: [io 0x0400-0x047f] has been reserved system 00:07: [io 0x0500-0x053f] has been reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:00:1c.0: BAR 9: assigned [mem 0xffd00000-0xffefffff pref] pci 0000:00:1c.1: BAR 9: assigned [mem 0xfffe00000-0xfffffffff 64bit pref] pci 0000:00:1c.1: BAR 7: assigned [io 0xf000-0xffff] pci 0000:01:00.0: BAR 6: assigned [mem 0xffee0000-0xffefffff pref] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd02fffff] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffefffff pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xf000-0xffff] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff] pci 0000:00:1c.1: bridge window [mem 0xfffe00000-0xfffffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd02fffff] pci_bus 0000:01: resource 2 [mem 0xffd00000-0xffefffff pref] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff] pci_bus 0000:02: resource 2 [mem 0xfffe00000-0xfffffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device PCI: CLS mismatch (256 != 64), using 64 bytes microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7 microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7 microcode: Microcode Update Driver: v2.00 , Peter Oruba Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 5992 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt pci 0000:02:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 15 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 16384K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 42 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: DUMMY ata2: DUMMY ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 42 ata4: DUMMY firewire_ohci 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 usbcore: registered new interface driver uas Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs applesmc: Apple Macmini detected: applesmc: - Model without accelerometer applesmc: - Model without light sensors and backlight applesmc: - Model with 2 temperature sensors applesmc: device successfully initialized. applesmc: 1 fans found. applesmc: driver successfully loaded. coretemp coretemp.0: TjMax is assumed as 100 C! coretemp coretemp.1: TjMax is assumed as 100 C! device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type rtc_cmos 00:08: setting system clock to 2010-11-16 08:39:06 UTC (1289896746) firewire_core: created device fw0: GUID 002332fffe153c0e, S400 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-8: Hitachi HTS725050A9A364, PC4OC70E, max UDMA/133 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sda5 sd 2:0:0:0: [sda] Attached SCSI disk EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda4): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:4. Freeing unused kernel memory: 432k freed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller sky2: driver version 1.28 sky2 0000:01:00.0: enabling device (0000 -> 0003) sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:01:00.0: setting latency timer to 64 sky2 0000:01:00.0: Yukon-2 EC chip revision 2 sky2 0000:01:00.0: irq 43 for MSI/MSI-X ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 sky2 0000:01:00.0: eth0: addr 00:1f:f3:44:83:6c ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd0445400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.37-rc2-00001-g9984b1f ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 uhci_hcd: USB Universal Host Controller Interface driver scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x20e8 ctl 0x2104 bmdma 0x20c0 irq 18 ata6: PATA max UDMA/100 cmd 0x20e0 ctl 0x2100 bmdma 0x20c8 irq 18 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 cfg80211: Calling CRDA to update world regulatory domain uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.37-rc2-00001-g9984b1f uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.37-rc2-00001-g9984b1f uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.37-rc2-00001-g9984b1f uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.37-rc2-00001-g9984b1f uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata5.00: ATAPI: PIONEER DVD-RW DVR-K06, Q617, max UDMA/33 ata5.00: configured for UDMA/33 scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-K06 Q617 PQ: 0 ANSI: 5 usb 1-1: new high speed USB device using ehci_hcd and address 2 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 ath5k 0000:02:00.0: enabling device (0000 -> 0002) ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ath5k 0000:02:00.0: setting latency timer to 64 ath5k 0000:02:00.0: registered as 'phy0' usb 1-1: New USB device found, idVendor=056d, idProduct=0000 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB HUB usb 1-1: Manufacturer: EIZO hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: New USB device found, idVendor=05e3, idProduct=0608 usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-5: Product: USB2.0 Hub hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected usb 1-6: new high speed USB device using ehci_hcd and address 5 ath: EEPROM regdomain: 0x6a ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x6a usb 1-6: New USB device found, idVendor=13d3, idProduct=3206 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6: Product: VP-7045 usb 1-6: Manufacturer: TWINHAN hda_codec: STAC922x, Apple subsys_id=106b0800 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61) dvb-usb: found a 'Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)' in warm state. usb 3-1: new low speed USB device using uhci_hcd and address 2 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)) dvb-usb: MAC address: 08:ca:00:00:00:ff DVB: registering adapter 0 frontend 0 (Twinhan VP7045/46 USB DVB-T)... usb 3-1: New USB device found, idVendor=04d9, idProduct=1400 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3 generic-usb 0003:04D9:1400.0001: input: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.1-1/input0 input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4 generic-usb 0003:04D9:1400.0002: input: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.1-1/input1 dvb-usb: Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II) successfully initialized and connected. usbcore: registered new interface driver dvb_usb_vp7045 usb 5-1: new full speed USB device using uhci_hcd and address 2 EXT3-fs (sda4): using internal journal usb 5-1: New USB device found, idVendor=05ac, idProduct=1000 usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5 generic-usb 0003:05AC:1000.0003: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input6 generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 loop: module loaded Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: New USB device found, idVendor=05ac, idProduct=8240 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: IR Receiver usb 5-2: Manufacturer: Apple Computer, Inc. generic-usb 0003:05AC:8240.0005: hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0 usb 1-1.2: new low speed USB device using ehci_hcd and address 8 usb 1-1.2: New USB device found, idVendor=046d, idProduct=c03d usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: USB-PS/2 Optical Mouse usb 1-1.2: Manufacturer: Logitech input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input7 generic-usb 0003:046D:C03D.0006: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2/input0 usb 1-1.3: new full speed USB device using ehci_hcd and address 9 usb 1-1.3: New USB device found, idVendor=056d, idProduct=0002 usb 1-1.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 usb 1-1.3: Product: EIZO USB HID Monitor usb 1-1.3: Manufacturer: EIZO generic-usb 0003:056D:0002.0007: hiddev0: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.7-1.3/input0 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 usb 1-5.3: new high speed USB device using ehci_hcd and address 10 usb 1-5.3: New USB device found, idVendor=05e3, idProduct=0608 usb 1-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-5.3: Product: USB2.0 Hub hub 1-5.3:1.0: USB hub found hub 1-5.3:1.0: 4 ports detected usb 1-5.4: new high speed USB device using ehci_hcd and address 11 usb 1-5.4: New USB device found, idVendor=04fc, idProduct=0c15 usb 1-5.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 usb 1-5.4: Product: USB to Serial-ATA bridge usb 1-5.4: Manufacturer: Sunplus Technology Inc. usb 1-5.4: SerialNumber: WDC WD10EA WD-WCAU41668315 usb 1-5.4: selecting invalid altsetting 1 scsi6 : usb-storage 1-5.4:1.0 usb 5-1: USB disconnect, address 2 usb 1-5.3.1: new high speed USB device using ehci_hcd and address 13 usb 1-5.3.1: New USB device found, idVendor=13fd, idProduct=0841 usb 1-5.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5.3.1: Product: USB Mass Storage Device usb 1-5.3.1: Manufacturer: TSSTcorp usb 1-5.3.1: SerialNumber: SATASLIM00000003737 scsi7 : usb-storage 1-5.3.1:1.0 usb 1-5.3.2: new high speed USB device using ehci_hcd and address 14 usb 1-5.3.2: New USB device found, idVendor=11b0, idProduct=6148 usb 1-5.3.2: New USB device strings: Mfr=3, Product=4, SerialNumber=5 usb 1-5.3.2: Product: FCR-HS219/1 Mobile Reader usb 1-5.3.2: Manufacturer: Kingston usb 1-5.3.2: SerialNumber: 092101011022 usb 1-5.3.2: selecting invalid altsetting 1 scsi8 : usb-storage 1-5.3.2:1.0 usb 1-5.3.4: new full speed USB device using ehci_hcd and address 15 usb 1-5.3.4: New USB device found, idVendor=03f0, idProduct=6004 usb 1-5.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5.3.4: Product: deskjet 5550 usb 1-5.3.4: Manufacturer: hp usb 1-5.3.4: SerialNumber: MY3181K2NN2L usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004 usbcore: registered new interface driver usblp scsi 6:0:0:0: Direct-Access WDC WD10 EACS-00D6B0 PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Attached SCSI disk usb 5-1: new full speed USB device using uhci_hcd and address 4 usb 5-1: New USB device found, idVendor=05ac, idProduct=8205 usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD01 PQ: 0 ANSI: 0 sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray sr 7:0:0:0: Attached scsi CD-ROM sr1 sr 7:0:0:0: Attached scsi generic sg3 type 5 scsi 8:0:0:0: Direct-Access Kingston FCR-HS219/1 9722 PQ: 0 ANSI: 0 sd 8:0:0:0: Attached scsi generic sg4 type 0 scsi 8:0:0:1: Direct-Access Kingston FCR-HS219/1 9722 PQ: 0 ANSI: 0 sd 8:0:0:1: Attached scsi generic sg5 type 0 sd 8:0:0:0: [sdc] Attached SCSI removable disk scsi 8:0:0:2: Direct-Access Kingston FCR-HS219/1 9722 PQ: 0 ANSI: 0 sd 8:0:0:1: [sdd] Attached SCSI removable disk sd 8:0:0:2: Attached scsi generic sg6 type 0 scsi 8:0:0:3: Direct-Access Kingston FCR-HS219/1 9722 PQ: 0 ANSI: 0 sd 8:0:0:3: Attached scsi generic sg7 type 0 sd 8:0:0:2: [sde] Attached SCSI removable disk sd 8:0:0:3: [sdf] Attached SCSI removable disk Adding 524284k swap on /dev/mapper/mac-swap. Priority:-1 extents:1 across:524284k EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) XFS mounting filesystem dm-1 Ending clean XFS mount for filesystem: dm-1 XFS mounting filesystem dm-2 Ending clean XFS mount for filesystem: dm-2 XFS mounting filesystem dm-3 Ending clean XFS mount for filesystem: dm-3 NET: Registered protocol family 10 sshd (1909): /proc/1909/oom_adj is deprecated, please use /proc/1909/oom_score_adj instead. sky2 0000:01:00.0: eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready sky2 0000:01:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready svc: failed to register lockdv1 RPC service (errno 97). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present