| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1290078346-3521-1-git-send-email-sonnyrao@linux.vnet.ibm.com> Date: Thu, 18 Nov 2010 05:05:46 -0600 From: Sonny Rao <sonnyrao@...ux.vnet.ibm.com> To: linux-scsi@...r.kernel.org Cc: Sonny Rao <sonnyrao@...ux.vnet.ibm.com>, Milton Miller <miltonm@....com>, Andrew Vasquez <andrew.vasquez@...gic.com>, linux-driver@...gic.com, "James E.J. Bottomley" <James.Bottomley@...e.de>, linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org Subject: [PATCH] [RFC] qla2xxx: Change parameter permissions in sysfs Many of the module parameter definitions in qla2xxx look like S_IRUGO|S_IRUSR which is effectively doing 0400 | 0444 which is pointless. It seems like the intention is to allow a user to change these parameters in sysfs. So this patch changes it to S_IRUGO|S_IWUSR to enable that. Most of these copied into a device-specific structure at init time, so the user would have to re-probe or re-bind the adapters for these to take effect. Signed-off-by: Milton Miller <miltonm@....com> Signed-off-by: Sonny Rao <sonnyrao@...ux.vnet.ibm.com> --- drivers/scsi/qla2xxx/qla_os.c | 32 ++++++++++++++++---------------- 1 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1644eab..f949959 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -37,12 +37,12 @@ static struct kmem_cache *srb_cachep; static struct kmem_cache *ctx_cachep; int ql2xlogintimeout = 20; -module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR); +module_param(ql2xlogintimeout, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xlogintimeout, "Login timeout value in seconds."); int qlport_down_retry; -module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR); +module_param(qlport_down_retry, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(qlport_down_retry, "Maximum number of command retries to a port that returns " "a PORT-DOWN status."); @@ -55,12 +55,12 @@ MODULE_PARM_DESC(ql2xplogiabsentdevice, "Default is 0 - no PLOGI. 1 - perfom PLOGI."); int ql2xloginretrycount = 0; -module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); +module_param(ql2xloginretrycount, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); int ql2xallocfwdump = 1; -module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR); +module_param(ql2xallocfwdump, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xallocfwdump, "Option to enable allocation of memory for a firmware dump " "during HBA initialization. Memory allocation requirements " @@ -73,7 +73,7 @@ MODULE_PARM_DESC(ql2xextended_error_logging, "Default is 0 - no logging. 1 - log errors."); int ql2xshiftctondsd = 6; -module_param(ql2xshiftctondsd, int, S_IRUGO|S_IRUSR); +module_param(ql2xshiftctondsd, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xshiftctondsd, "Set to control shifting of command type processing " "based on total number of SG elements."); @@ -81,7 +81,7 @@ MODULE_PARM_DESC(ql2xshiftctondsd, static void qla2x00_free_device(scsi_qla_host_t *); int ql2xfdmienable=1; -module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); +module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xfdmienable, "Enables FDMI registrations. " "0 - no FDMI. Default is 1 - perform FDMI."); @@ -106,27 +106,27 @@ MODULE_PARM_DESC(ql2xenablehba_err_chk, " Default is 0 - Error isolation disabled, 1 - Enable it"); int ql2xiidmaenable=1; -module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR); +module_param(ql2xiidmaenable, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xiidmaenable, "Enables iIDMA settings " "Default is 1 - perform iIDMA. 0 - no iIDMA."); int ql2xmaxqueues = 1; -module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR); +module_param(ql2xmaxqueues, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmaxqueues, "Enables MQ settings " "Default is 1 for single queue. Set it to number " "of queues in MQ mode."); int ql2xmultique_tag; -module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR); +module_param(ql2xmultique_tag, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmultique_tag, "Enables CPU affinity settings for the driver " "Default is 0 for no affinity of request and response IO. " "Set it to 1 to turn on the cpu affinity."); int ql2xfwloadbin; -module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR); +module_param(ql2xfwloadbin, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xfwloadbin, "Option to specify location from which to load ISP firmware:\n" " 2 -- load firmware via the request_firmware() (hotplug)\n" @@ -135,39 +135,39 @@ MODULE_PARM_DESC(ql2xfwloadbin, " 0 -- use default semantics.\n"); int ql2xetsenable; -module_param(ql2xetsenable, int, S_IRUGO|S_IRUSR); +module_param(ql2xetsenable, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xetsenable, "Enables firmware ETS burst." "Default is 0 - skip ETS enablement."); int ql2xdbwr = 1; -module_param(ql2xdbwr, int, S_IRUGO|S_IRUSR); +module_param(ql2xdbwr, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xdbwr, "Option to specify scheme for request queue posting\n" " 0 -- Regular doorbell.\n" " 1 -- CAMRAM doorbell (faster).\n"); int ql2xdontresethba; -module_param(ql2xdontresethba, int, S_IRUGO|S_IRUSR); +module_param(ql2xdontresethba, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xdontresethba, "Option to specify reset behaviour\n" " 0 (Default) -- Reset on failure.\n" " 1 -- Do not reset on failure.\n"); int ql2xtargetreset = 1; -module_param(ql2xtargetreset, int, S_IRUGO|S_IRUSR); +module_param(ql2xtargetreset, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xtargetreset, "Enable target reset." "Default is 1 - use hw defaults."); int ql2xgffidenable; -module_param(ql2xgffidenable, int, S_IRUGO|S_IRUSR); +module_param(ql2xgffidenable, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xgffidenable, "Enables GFF_ID checks of port type. " "Default is 0 - Do not use GFF_ID information."); int ql2xasynctmfenable; -module_param(ql2xasynctmfenable, int, S_IRUGO|S_IRUSR); +module_param(ql2xasynctmfenable, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xasynctmfenable, "Enables issue of TM IOCBs asynchronously via IOCB mechanism" "Default is 0 - Issue TM IOCBs via mailbox mechanism."); -- 1.5.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists