lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <4CE6103C.5060806@dsn.okisemi.com>
Date:	Fri, 19 Nov 2010 14:50:52 +0900
From:	Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To:	Wolfgang Grandegger <wg@...ndegger.com>,
	Wolfram Sang <w.sang@...gutronix.de>,
	Christian Pellegrin <chripell@...e.org>,
	Barry Song <21cnbao@...il.com>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	socketcan-core@...ts.berlios.de, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	"David S. Miller" <davem@...emloft.net>
CC:	qi.wang@...el.com, yong.y.wang@...el.com,
	andrew.chih.howe.khor@...el.com, joel.clark@...el.com,
	kok.howg.ewe@...el.com, margie.foster@...el.com
Subject: [PATCH net-next-2.6 15/17] can: EG20T PCH: Move MSI processing open/close
 to probe/remove

Move MSI processing to probe/remove processing.
Currently, in case this driver is integrated as module, and 
when this module is re-installed, no interrupts is to be occurred.
For the above issue, move MSI processing to open/release processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
 drivers/net/can/pch_can.c |   29 ++++++++++++++---------------
 1 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index df14569..c612a99 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -859,15 +859,6 @@ static int pch_can_open(struct net_device *ndev)
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	int retval;
 
-	retval = pci_enable_msi(priv->dev);
-	if (retval) {
-		netdev_err(ndev, "PCH CAN opened without MSI\n");
-		priv->use_msi = 0;
-	} else {
-		netdev_err(ndev, "PCH CAN opened with MSI\n");
-		priv->use_msi = 1;
-	}
-
 	/* Regstering the interrupt. */
 	retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED,
 			     ndev->name, ndev);
@@ -893,9 +884,6 @@ static int pch_can_open(struct net_device *ndev)
 err_open_candev:
 	free_irq(priv->dev->irq, ndev);
 req_irq_err:
-	if (priv->use_msi)
-		pci_disable_msi(priv->dev);
-
 	pch_can_release(priv);
 
 	return retval;
@@ -909,8 +897,6 @@ static int pch_close(struct net_device *ndev)
 	napi_disable(&priv->napi);
 	pch_can_release(priv);
 	free_irq(priv->dev->irq, ndev);
-	if (priv->use_msi)
-		pci_disable_msi(priv->dev);
 	close_candev(ndev);
 	priv->can.state = CAN_STATE_STOPPED;
 	return 0;
@@ -993,12 +979,14 @@ static void __devexit pch_can_remove(struct pci_dev *pdev)
 	struct pch_can_priv *priv = netdev_priv(ndev);
 
 	unregister_candev(priv->ndev);
-	free_candev(priv->ndev);
 	pci_iounmap(pdev, priv->regs);
+	if (priv->use_msi)
+		pci_disable_msi(priv->dev);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 	pch_can_reset(priv);
+	free_candev(priv->ndev);
 }
 
 #ifdef CONFIG_PM
@@ -1255,6 +1243,15 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 
 	netif_napi_add(ndev, &priv->napi, pch_can_poll, PCH_RX_OBJ_END);
 
+	rc = pci_enable_msi(priv->dev);
+	if (rc) {
+		netdev_err(ndev, "PCH CAN opened without MSI\n");
+		priv->use_msi = 0;
+	} else {
+		netdev_err(ndev, "PCH CAN opened with MSI\n");
+		priv->use_msi = 1;
+	}
+
 	rc = register_candev(ndev);
 	if (rc) {
 		dev_err(&pdev->dev, "Failed register_candev %d\n", rc);
@@ -1264,6 +1261,8 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 	return 0;
 
 probe_exit_reg_candev:
+	if (priv->use_msi)
+		pci_disable_msi(priv->dev);
 	free_candev(ndev);
 probe_exit_alloc_candev:
 	pci_iounmap(pdev, addr);
-- 
1.6.0.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ