[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-rc2+ (sarah@broadway) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #110 SMP Wed Nov 17 14:46:49 PST 2010 [ 0.000000] Command line: root=UUID=e4b17c15-bf6f-4c12-8ebf-8169eb566af8 ro single [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cdd80000 (usable) [ 0.000000] BIOS-e820: 00000000cdd80000 - 00000000cdd8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cdd8e000 - 00000000cddd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cddd0000 - 00000000cde00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: P5Q-EM/System Product Name, BIOS 2001 02/26/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 220000000 mask FF0000000 write-back [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 0CDE00000 mask FFFE00000 uncachable [ 0.000000] 6 base 0CE000000 mask FFE000000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cde00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcdd80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cdd80000 [ 0.000000] 0000000000 - 00cdc00000 page 2M [ 0.000000] 00cdc00000 - 00cdd80000 page 4k [ 0.000000] kernel direct mapping tables up to cdd80000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ cdd76000-cdd80000 [ 0.000000] RAMDISK: 34dff000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fb5b0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cdd80000 00040 (v01 A_M_I_ OEMRSDT 02000926 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cdd80200 00084 (v02 A_M_I_ OEMFACP 02000926 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cdd80440 090F1 (v01 A0982 A0982066 00000066 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cdd8e000 00040 [ 0.000000] ACPI: APIC 00000000cdd80390 0006C (v01 A_M_I_ OEMAPIC 02000926 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cdd80400 0003C (v01 A_M_I_ OEMMCFG 02000926 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cdd8e040 00089 (v01 A_M_I_ AMI_OEM 02000926 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cdd89540 00038 (v01 A_M_I_ OEMHPET 02000926 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000cdd8e0d0 02024 (v01 A_M_I_ GMCHSCI 02000926 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cdd89580 000B0 (v01 A_M_I_ OEMOSFR 02000926 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff8800bc000000-ffff8800c31fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cdd80 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2088206 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 824760 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cdd80000 - 00000000cdd8e000 [ 0.000000] PM: Registered nosave memory: 00000000cdd8e000 - 00000000cddd0000 [ 0.000000] PM: Registered nosave memory: 00000000cddd0000 - 00000000cde00000 [ 0.000000] PM: Registered nosave memory: 00000000cde00000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cde00000 (gap: cde00000:31000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800cda00000 s81600 r8192 d20800 u524288 [ 0.000000] pcpu-alloc: s81600 r8192 d20800 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2056840 [ 0.000000] Kernel command line: root=UUID=e4b17c15-bf6f-4c12-8ebf-8169eb566af8 ro single [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8092720k/9175040k available (5541k kernel code, 822216k absent, 260104k reserved, 5648k data, 600k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2833.056 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.11 BogoMIPS (lpj=11332224) [ 0.004087] pid_max: default: 32768 minimum: 301 [ 0.004140] Security Framework initialized [ 0.004180] SELinux: Disabled at boot. [ 0.004227] Mount-cache hash table entries: 256 [ 0.004372] Initializing cgroup subsys ns [ 0.004410] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004466] Initializing cgroup subsys cpuacct [ 0.004505] Initializing cgroup subsys memory [ 0.004546] Initializing cgroup subsys freezer [ 0.004605] CPU: Physical Processor ID: 0 [ 0.004641] CPU: Processor Core ID: 0 [ 0.004676] using mwait in idle threads. [ 0.004712] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.004807] ... version: 2 [ 0.004842] ... bit width: 40 [ 0.004878] ... generic registers: 2 [ 0.004914] ... value mask: 000000ffffffffff [ 0.004952] ... max period: 000000007fffffff [ 0.004990] ... fixed-purpose events: 3 [ 0.005026] ... event mask: 0000000700000003 [ 0.006053] ACPI: Core revision 20101013 [ 0.016045] Setting APIC routing to flat [ 0.016376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057862] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.060000] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.332006] Brought up 4 CPUs [ 0.332051] Total of 4 processors activated (22741.55 BogoMIPS). [ 0.334450] regulator: core version 0.5 [ 0.334450] regulator: dummy: [ 0.334450] Time: 1:02:52 Date: 11/18/10 [ 0.334450] NET: Registered protocol family 16 [ 0.334450] ACPI: bus type pci registered [ 0.334450] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.334450] PCI: not using MMCONFIG [ 0.334450] PCI: Using configuration type 1 for base access [ 0.336033] bio: create slab at 0 [ 0.336852] ACPI: EC: Look up EC in DSDT [ 0.337763] ACPI: Executed 1 blocks of module-level executable AML code [ 0.345787] ACPI: Interpreter enabled [ 0.345823] ACPI: (supports S0 S1 S3 S4 S5) [ 0.345956] ACPI: Using IOAPIC for interrupt routing [ 0.346020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.347165] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.384863] ACPI: No dock devices found. [ 0.384900] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.385058] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.385306] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.385347] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.385388] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.385442] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.385496] pci_root PNP0A08:00: host bridge window [mem 0xcde00000-0xdfffffff] [ 0.385549] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.385611] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600 [ 0.385640] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604 [ 0.385662] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.385664] pci 0000:00:01.0: PME# disabled [ 0.385674] pci 0000:00:02.0: [8086:2e22] type 0 class 0x000300 [ 0.385683] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.385689] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.385693] pci 0000:00:02.0: reg 20: [io 0xcc00-0xcc07] [ 0.385736] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 0.385770] pci 0000:00:1a.0: reg 20: [io 0xc480-0xc49f] [ 0.385805] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 0.385840] pci 0000:00:1a.1: reg 20: [io 0xc800-0xc81f] [ 0.385875] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 0.385909] pci 0000:00:1a.2: reg 20: [io 0xc880-0xc89f] [ 0.385951] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 0.385968] pci 0000:00:1a.7: reg 10: [mem 0xfe3fb000-0xfe3fb3ff] [ 0.386028] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.386032] pci 0000:00:1a.7: PME# disabled [ 0.386050] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 0.386062] pci 0000:00:1b.0: reg 10: [mem 0xfe3f4000-0xfe3f7fff 64bit] [ 0.386105] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.386108] pci 0000:00:1b.0: PME# disabled [ 0.386122] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 0.386164] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.386167] pci 0000:00:1c.0: PME# disabled [ 0.386185] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 0.386227] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.386230] pci 0000:00:1c.4: PME# disabled [ 0.386245] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604 [ 0.386288] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.386291] pci 0000:00:1c.5: PME# disabled [ 0.386308] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 0.386343] pci 0000:00:1d.0: reg 20: [io 0xc000-0xc01f] [ 0.386377] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 0.386412] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f] [ 0.386447] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 0.386482] pci 0000:00:1d.2: reg 20: [io 0xc400-0xc41f] [ 0.386524] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 0.386541] pci 0000:00:1d.7: reg 10: [mem 0xfe3fa000-0xfe3fa3ff] [ 0.386601] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.386605] pci 0000:00:1d.7: PME# disabled [ 0.386620] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.386664] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 0.386730] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.386786] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.386829] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.386916] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 0.386931] pci 0000:00:1f.2: reg 10: [io 0xb880-0xb887] [ 0.386937] pci 0000:00:1f.2: reg 14: [io 0xb800-0xb803] [ 0.386943] pci 0000:00:1f.2: reg 18: [io 0xb480-0xb487] [ 0.386950] pci 0000:00:1f.2: reg 1c: [io 0xb400-0xb403] [ 0.386956] pci 0000:00:1f.2: reg 20: [io 0xb080-0xb09f] [ 0.386963] pci 0000:00:1f.2: reg 24: [mem 0xfe3f8000-0xfe3f87ff] [ 0.386989] pci 0000:00:1f.2: PME# supported from D3hot [ 0.386991] pci 0000:00:1f.2: PME# disabled [ 0.387004] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 0.387016] pci 0000:00:1f.3: reg 10: [mem 0xfe3f9000-0xfe3f90ff 64bit] [ 0.387033] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.387083] pci 0000:01:00.0: [1033:0194] type 0 class 0x000c03 [ 0.387097] pci 0000:01:00.0: reg 10: [mem 0xfe8fe000-0xfe8fffff 64bit] [ 0.387152] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.387155] pci 0000:01:00.0: PME# disabled [ 0.387181] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.387221] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.387223] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.387226] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.387258] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.387298] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.387301] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.387306] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.387351] pci 0000:03:00.0: [11ab:6101] type 0 class 0x000101 [ 0.387365] pci 0000:03:00.0: reg 10: [io 0xec00-0xec07] [ 0.387375] pci 0000:03:00.0: reg 14: [io 0xe880-0xe883] [ 0.387386] pci 0000:03:00.0: reg 18: [io 0xe800-0xe807] [ 0.387396] pci 0000:03:00.0: reg 1c: [io 0xe480-0xe483] [ 0.387406] pci 0000:03:00.0: reg 20: [io 0xe400-0xe40f] [ 0.387417] pci 0000:03:00.0: reg 24: [mem 0xfeaffc00-0xfeaffdff] [ 0.387455] pci 0000:03:00.0: supports D1 [ 0.387456] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.387460] pci 0000:03:00.0: PME# disabled [ 0.387474] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.387538] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.387578] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.387581] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.387586] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.387631] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.387645] pci 0000:02:00.0: reg 10: [io 0xd800-0xd8ff] [ 0.387670] pci 0000:02:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit] [ 0.387686] pci 0000:02:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref] [ 0.387696] pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.387730] pci 0000:02:00.0: supports D1 D2 [ 0.387732] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.387736] pci 0000:02:00.0: PME# disabled [ 0.392015] pci 0000:00:1c.5: PCI bridge to [bus 02-02] [ 0.392058] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.392062] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.392068] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.392115] pci 0000:05:03.0: [11c1:5811] type 0 class 0x000c00 [ 0.392129] pci 0000:05:03.0: reg 10: [mem 0xfebff000-0xfebfffff] [ 0.392183] pci 0000:05:03.0: supports D1 D2 [ 0.392185] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.392188] pci 0000:05:03.0: PME# disabled [ 0.392222] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.392266] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.392269] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.392273] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.392275] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.392277] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.392279] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.392281] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.392283] pci 0000:00:1e.0: bridge window [mem 0xcde00000-0xdfffffff] (subtractive decode) [ 0.392285] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.392301] pci_bus 0000:00: on NUMA node 0 [ 0.392303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.392387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.392428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.392458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.392485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.392525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.400145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.400427] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.400708] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.400989] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.401271] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.401599] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.401879] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.402159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.402445] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.402508] vgaarb: loaded [ 0.402596] SCSI subsystem initialized [ 0.402638] libata version 3.00 loaded. [ 0.402638] wmi: Mapper loaded [ 0.402638] PCI: Using ACPI for IRQ routing [ 0.402638] PCI: pci_cache_line_size set to 64 bytes [ 0.402638] reserve RAM buffer: 000000000009e800 - 000000000009ffff [ 0.402638] reserve RAM buffer: 00000000cdd80000 - 00000000cfffffff [ 0.402638] Bluetooth: Core ver 2.15 [ 0.402638] NET: Registered protocol family 31 [ 0.402638] Bluetooth: HCI device and connection manager initialized [ 0.402638] Bluetooth: HCI socket layer initialized [ 0.402638] NET: Registered protocol family 8 [ 0.402638] NET: Registered protocol family 20 [ 0.402638] NetLabel: Initializing [ 0.402638] NetLabel: domain hash size = 128 [ 0.402638] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.402638] NetLabel: unlabeled traffic allowed by default [ 0.404023] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.404067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.404189] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.412018] Switching to clocksource tsc [ 0.413265] pnp: PnP ACPI init [ 0.413308] ACPI: bus type pnp registered [ 0.413446] pnp 00:00: [bus 00-ff] [ 0.413448] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.413449] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.413451] pnp 00:00: [io 0x0d00-0xffff window] [ 0.413452] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.413454] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.413456] pnp 00:00: [mem 0xcde00000-0xdfffffff window] [ 0.413457] pnp 00:00: [mem 0xf0000000-0xffffffff window] [ 0.413491] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.413498] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.413526] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.413549] pnp 00:02: [dma 4] [ 0.413551] pnp 00:02: [io 0x0000-0x000f] [ 0.413552] pnp 00:02: [io 0x0081-0x0083] [ 0.413554] pnp 00:02: [io 0x0087] [ 0.413555] pnp 00:02: [io 0x0089-0x008b] [ 0.413556] pnp 00:02: [io 0x008f] [ 0.413558] pnp 00:02: [io 0x00c0-0x00df] [ 0.413577] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.413584] pnp 00:03: [io 0x0070-0x0071] [ 0.413591] pnp 00:03: [irq 8] [ 0.413608] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.413614] pnp 00:04: [io 0x0061] [ 0.413633] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.413639] pnp 00:05: [io 0x00f0-0x00ff] [ 0.413643] pnp 00:05: [irq 13] [ 0.413661] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.413951] pnp 00:06: [io 0x03f0-0x03f5] [ 0.413953] pnp 00:06: [io 0x03f7] [ 0.413957] pnp 00:06: [irq 6] [ 0.413958] pnp 00:06: [dma 2] [ 0.413998] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.414076] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.414078] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.414079] pnp 00:07: [io 0x0290-0x029f] [ 0.414111] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.414248] pnp 00:08: [io 0x0010-0x001f] [ 0.414249] pnp 00:08: [io 0x0022-0x003f] [ 0.414250] pnp 00:08: [io 0x0044-0x004d] [ 0.414252] pnp 00:08: [io 0x0050-0x005f] [ 0.414253] pnp 00:08: [io 0x0062-0x0063] [ 0.414254] pnp 00:08: [io 0x0065-0x006f] [ 0.414256] pnp 00:08: [io 0x0072-0x007f] [ 0.414257] pnp 00:08: [io 0x0080] [ 0.414258] pnp 00:08: [io 0x0084-0x0086] [ 0.414259] pnp 00:08: [io 0x0088] [ 0.414261] pnp 00:08: [io 0x008c-0x008e] [ 0.414262] pnp 00:08: [io 0x0090-0x009f] [ 0.414263] pnp 00:08: [io 0x00a2-0x00bf] [ 0.414265] pnp 00:08: [io 0x00e0-0x00ef] [ 0.414266] pnp 00:08: [io 0x04d0-0x04d1] [ 0.414267] pnp 00:08: [io 0x0800-0x087f] [ 0.414269] pnp 00:08: [io 0x0400-0x03ff disabled] [ 0.414270] pnp 00:08: [io 0x0500-0x057f] [ 0.414272] pnp 00:08: [mem 0xfed08000-0xfed08fff] [ 0.414273] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 0.414274] pnp 00:08: [mem 0xfed20000-0xfed3ffff] [ 0.414276] pnp 00:08: [mem 0xfed50000-0xfed8ffff] [ 0.414326] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.414391] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.414412] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.414464] pnp 00:0a: [mem 0xffb00000-0xffbfffff] [ 0.414466] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.414486] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.414541] pnp 00:0b: [mem 0xffc00000-0xffefffff] [ 0.414574] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.414803] pnp 00:0c: [io 0x03f8-0x03ff] [ 0.414807] pnp 00:0c: [irq 4] [ 0.414808] pnp 00:0c: [dma 0 disabled] [ 0.414855] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.414924] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled] [ 0.414926] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled] [ 0.414928] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.414930] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.414965] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.414988] pnp 00:0e: [io 0x0060] [ 0.414990] pnp 00:0e: [io 0x0064] [ 0.414993] pnp 00:0e: [irq 1] [ 0.415015] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.415068] pnp 00:0f: [mem 0xe0000000-0xefffffff] [ 0.415102] pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.415275] pnp 00:10: [mem 0x00000000-0x0009ffff] [ 0.415277] pnp 00:10: [mem 0x000c0000-0x000cffff] [ 0.415278] pnp 00:10: [mem 0x000e0000-0x000fffff] [ 0.415280] pnp 00:10: [mem 0x00100000-0xcddfffff] [ 0.415281] pnp 00:10: [mem 0xe0000000-0xffffffff] [ 0.415322] pnp 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.415433] pnp: PnP ACPI: found 17 devices [ 0.415470] ACPI: ACPI bus type pnp unregistered [ 0.415512] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.415556] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.415598] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.415638] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.415678] system 00:08: [io 0x0500-0x057f] could not be reserved [ 0.415719] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.415760] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.415801] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.415842] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.415886] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved [ 0.415939] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.415981] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.416024] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved [ 0.416075] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.416117] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved [ 0.416158] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.416200] system 00:10: [mem 0x00100000-0xcddfffff] could not be reserved [ 0.416242] system 00:10: [mem 0xe0000000-0xffffffff] could not be reserved [ 0.421802] pci 0000:00:1c.0: BAR 8: assigned [mem 0xff800000-0xffbfffff] [ 0.421846] pci 0000:00:1c.4: BAR 9: assigned [mem 0xff600000-0xff7fffff 64bit pref] [ 0.421901] pci 0000:00:1c.0: BAR 7: assigned [io 0xf000-0xffff] [ 0.421941] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.421979] pci 0000:00:01.0: bridge window [io disabled] [ 0.422020] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.422061] pci 0000:00:01.0: bridge window [mem pref disabled] [ 0.422102] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.422141] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 0.422183] pci 0000:00:1c.0: bridge window [mem 0xff800000-0xffbfffff] [ 0.422226] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.422283] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.422322] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.422364] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.422407] pci 0000:00:1c.4: bridge window [mem 0xff600000-0xff7fffff 64bit pref] [ 0.422464] pci 0000:00:1c.5: PCI bridge to [bus 02-02] [ 0.422503] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.422545] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.422587] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.422645] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.422683] pci 0000:00:1e.0: bridge window [io disabled] [ 0.422724] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.422766] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.422815] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.422857] pci 0000:00:01.0: setting latency timer to 64 [ 0.422861] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.422902] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.422945] pci 0000:00:1c.0: setting latency timer to 64 [ 0.422949] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.422991] pci 0000:00:1c.4: setting latency timer to 64 [ 0.422996] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.423038] pci 0000:00:1c.5: setting latency timer to 64 [ 0.423043] pci 0000:00:1e.0: setting latency timer to 64 [ 0.423045] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.423047] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.423049] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.423050] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.423052] pci_bus 0000:00: resource 8 [mem 0xcde00000-0xdfffffff] [ 0.423053] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] [ 0.423055] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.423057] pci_bus 0000:04: resource 0 [io 0xf000-0xffff] [ 0.423059] pci_bus 0000:04: resource 1 [mem 0xff800000-0xffbfffff] [ 0.423060] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.423062] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.423064] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.423065] pci_bus 0000:03: resource 2 [mem 0xff600000-0xff7fffff 64bit pref] [ 0.423067] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.423069] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.423071] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.423072] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.423074] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.423076] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.423077] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.423079] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.423081] pci_bus 0000:05: resource 8 [mem 0xcde00000-0xdfffffff] [ 0.423082] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff] [ 0.423104] NET: Registered protocol family 2 [ 0.423182] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.423654] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.424899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.425301] TCP: Hash tables configured (established 262144 bind 65536) [ 0.425343] TCP reno registered [ 0.425379] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.425463] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.425623] NET: Registered protocol family 1 [ 0.425676] pci 0000:00:02.0: Boot video device [ 0.425681] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.425683] pci 0000:00:1a.0: Performing full reset [ 0.425697] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.425699] pci 0000:00:1a.1: Performing full reset [ 0.425713] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.425714] pci 0000:00:1a.2: Performing full reset [ 0.425761] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.425763] pci 0000:00:1d.0: Performing full reset [ 0.425776] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.425778] pci 0000:00:1d.1: Performing full reset [ 0.425792] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.425793] pci 0000:00:1d.2: Performing full reset [ 0.425869] PCI: CLS 32 bytes, default 64 [ 0.425911] Trying to unpack rootfs image as initramfs... [ 1.338235] Freeing initrd memory: 51140k freed [ 1.353766] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.353814] Placing 64MB software IO TLB between ffff8800c8e00000 - ffff8800cce00000 [ 1.353868] software IO TLB at phys 0xc8e00000 - 0xcce00000 [ 1.354121] Scanning for low memory corruption every 60 seconds [ 1.354282] audit: initializing netlink socket (disabled) [ 1.354333] type=2000 audit(1290042172.352:1): initialized [ 1.371975] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.373259] VFS: Disk quotas dquot_6.5.2 [ 1.373334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.373820] fuse init (API version 7.15) [ 1.373914] msgmni has been set to 15905 [ 1.374228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.374283] io scheduler noop registered [ 1.374318] io scheduler deadline registered (default) [ 1.374382] io scheduler cfq registered [ 1.374521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.374587] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.374729] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.374788] ACPI: Power Button [PWRB] [ 1.374858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.374913] ACPI: Power Button [PWRF] [ 1.375081] ACPI: acpi_idle registered with cpuidle [ 1.376476] Linux agpgart interface v0.103 [ 1.376527] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.396877] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.660485] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.708880] brd: module loaded [ 1.709273] loop: module loaded [ 1.709384] ahci 0000:00:1f.2: version 3.0 [ 1.709399] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.709480] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.709518] ahci: SSS flag set, parallel bus scan disabled [ 1.709583] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.709640] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.709698] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.748499] scsi0 : ahci [ 1.748628] scsi1 : ahci [ 1.748745] scsi2 : ahci [ 1.748860] scsi3 : ahci [ 1.748977] scsi4 : ahci [ 1.749092] scsi5 : ahci [ 1.749236] ata1: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8100 irq 40 [ 1.749291] ata2: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8180 irq 40 [ 1.749345] ata3: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8200 irq 40 [ 1.749399] ata4: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8280 irq 40 [ 1.749453] ata5: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8300 irq 40 [ 1.749507] ata6: SATA max UDMA/133 abar m2048@0xfe3f8000 port 0xfe3f8380 irq 40 [ 1.749860] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.749932] pata_marvell 0000:03:00.0: setting latency timer to 64 [ 1.750147] scsi6 : pata_marvell [ 1.750259] scsi7 : pata_marvell [ 1.750332] ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 [ 1.750373] ata8: DUMMY [ 1.750599] Fixed MDIO Bus: probed [ 1.750634] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 1.750673] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 1.750729] PPP generic driver version 2.4.2 [ 1.788036] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.788079] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.788865] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.788967] mice: PS/2 mouse device common for all mice [ 1.789086] rtc_cmos 00:03: RTC can wake from S4 [ 1.808529] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.820041] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.820105] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.820181] lirc_dev: IR Remote Control driver registered, major 252 [ 1.820229] IR NEC protocol handler initialized [ 1.820266] IR RC5(x) protocol handler initialized [ 1.820303] IR RC6 protocol handler initialized [ 1.820339] IR JVC protocol handler initialized [ 1.820376] IR Sony protocol handler initialized [ 1.820412] IR RC5 (streamzap) protocol handler initialized [ 1.820451] Linux video capture interface: v2.00 [ 1.820551] device-mapper: uevent: version 1.0.3 [ 1.820679] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 1.820830] device-mapper: multipath: version 1.1.1 loaded [ 1.820879] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.821016] cpuidle: using governor ladder [ 1.821052] cpuidle: using governor menu [ 1.821267] TCP cubic registered [ 1.821382] NET: Registered protocol family 10 [ 1.821625] lo: Disabled Privacy Extensions [ 1.821783] NET: Registered protocol family 17 [ 1.821878] Bluetooth: L2CAP ver 2.15 [ 1.821919] Bluetooth: L2CAP socket layer initialized [ 1.821958] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.821994] Bluetooth: SCO socket layer initialized [ 1.822590] Bluetooth: RFCOMM TTY layer initialized [ 1.822637] Bluetooth: RFCOMM socket layer initialized [ 1.822675] Bluetooth: RFCOMM ver 1.11 [ 1.822723] Registering the dns_resolver key type [ 1.822853] PM: Checking hibernation image partition /dev/sda5 [ 2.068013] ata1: SATA link down (SStatus 0 SControl 300) [ 2.560011] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.587003] ata2.00: HPA detected: current 976771055, native 976773168 [ 2.587050] ata2.00: ATA-8: ST3500410AS, CC34, max UDMA/133 [ 2.587092] ata2.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.626541] ata2.00: configured for UDMA/133 [ 2.626671] scsi 1:0:0:0: Direct-Access ATA ST3500410AS CC34 PQ: 0 ANSI: 5 [ 2.626815] sd 1:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 2.626826] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.626975] sd 1:0:0:0: [sda] Write Protect is off [ 2.627013] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.627032] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.661160] sda: sda1 sda2 < sda5 > [ 2.661416] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.944012] ata3: SATA link down (SStatus 0 SControl 300) [ 3.264012] ata4: SATA link down (SStatus 0 SControl 300) [ 3.584012] ata5: SATA link down (SStatus 0 SControl 300) [ 3.904011] ata6: SATA link down (SStatus 0 SControl 300) [ 3.904095] PM: Hibernation image partition 8:5 present [ 3.904097] PM: Looking for hibernation image. [ 3.918426] PM: Image not found (code -22) [ 3.918428] PM: Hibernation image not present or could not be loaded. [ 3.918440] registered taskstats version 1 [ 3.918741] Magic number: 2:447:3 [ 3.918801] system 00:10: hash matches [ 3.918886] rtc_cmos 00:03: setting system clock to 2010-11-18 01:02:55 UTC (1290042175) [ 3.918947] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.918986] EDD information not available. [ 3.919077] Freeing unused kernel memory: 600k freed [ 3.919257] Write protecting the kernel read-only data: 10240k [ 3.919436] Freeing unused kernel memory: 584k freed [ 3.919732] Freeing unused kernel memory: 1784k freed [ 3.986141] udevd (173): /proc/173/oom_adj is deprecated, please use /proc/173/oom_score_adj instead. [ 4.005082] Floppy drive(s): fd0 is 1.44M [ 4.023855] FDC 0 is a post-1991 82077 [ 4.053333] usbcore: registered new interface driver usbfs [ 4.053418] usbcore: registered new interface driver hub [ 4.056629] usbcore: registered new device driver usb [ 4.059296] uhci_hcd: USB Universal Host Controller Interface driver [ 4.059457] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.059514] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.059516] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.059579] drivers/usb/core/inode.c: creating file 'devices' [ 4.059582] drivers/usb/core/inode.c: creating file '001' [ 4.059586] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.064105] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.064155] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.064157] uhci_hcd 0000:00:1a.0: Performing full reset [ 4.064169] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 4.064178] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480 [ 4.064260] usb usb1: default language 0x0409 [ 4.064265] usb usb1: udev 1, busnum 1, minor = 0 [ 4.064267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.064314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.064373] usb usb1: Product: UHCI Host Controller [ 4.064413] usb usb1: Manufacturer: Linux 2.6.37-rc2+ uhci_hcd [ 4.064457] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.064562] usb usb1: usb_probe_device [ 4.064564] usb usb1: configuration #1 chosen from 1 choice [ 4.064571] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.064591] hub 1-0:1.0: usb_probe_interface [ 4.064593] hub 1-0:1.0: usb_probe_interface - got id [ 4.064595] hub 1-0:1.0: USB hub found [ 4.064636] hub 1-0:1.0: 2 ports detected [ 4.064674] hub 1-0:1.0: standalone hub [ 4.064676] hub 1-0:1.0: no power switching (usb 1.0) [ 4.064677] hub 1-0:1.0: individual port over-current protection [ 4.064679] hub 1-0:1.0: power on to power good time: 2ms [ 4.064682] hub 1-0:1.0: local power source is good [ 4.064684] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.064704] drivers/usb/core/inode.c: creating file '001' [ 4.064761] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.064810] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.064813] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.064857] drivers/usb/core/inode.c: creating file '002' [ 4.064869] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 4.065140] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.065210] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.065349] r8169 0000:02:00.0: setting latency timer to 64 [ 4.065397] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 4.065719] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000050000, 00:24:8c:7f:f0:aa, XID 1c4000c0 IRQ 41 [ 4.076314] uhci_hcd 0000:00:1a.1: detected 2 ports [ 4.076361] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.076362] uhci_hcd 0000:00:1a.1: Performing full reset [ 4.076375] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 4.076396] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800 [ 4.076486] usb usb2: default language 0x0409 [ 4.076491] usb usb2: udev 1, busnum 2, minor = 128 [ 4.076493] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.076541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.076602] usb usb2: Product: UHCI Host Controller [ 4.076642] usb usb2: Manufacturer: Linux 2.6.37-rc2+ uhci_hcd [ 4.076690] usb usb2: SerialNumber: 0000:00:1a.1 [ 4.076801] usb usb2: usb_probe_device [ 4.076804] usb usb2: configuration #1 chosen from 1 choice [ 4.076811] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.076833] hub 2-0:1.0: usb_probe_interface [ 4.076834] hub 2-0:1.0: usb_probe_interface - got id [ 4.076837] hub 2-0:1.0: USB hub found [ 4.076888] hub 2-0:1.0: 2 ports detected [ 4.076937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.076939] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 4.076947] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 4.077075] hub 2-0:1.0: standalone hub [ 4.077076] hub 2-0:1.0: no power switching (usb 1.0) [ 4.077078] hub 2-0:1.0: individual port over-current protection [ 4.077079] hub 2-0:1.0: power on to power good time: 2ms [ 4.077083] hub 2-0:1.0: local power source is good [ 4.077085] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.077104] drivers/usb/core/inode.c: creating file '001' [ 4.077175] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.077335] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.077338] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.077395] drivers/usb/core/inode.c: creating file '003' [ 4.077400] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 4.085541] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.085546] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 4.085575] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.085635] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.089536] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.089538] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 4.090598] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe3fb000 [ 4.090659] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.094535] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 4.104053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.104144] usb usb3: default language 0x0409 [ 4.104152] usb usb3: udev 1, busnum 3, minor = 256 [ 4.104155] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.104199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.104256] usb usb3: Product: EHCI Host Controller [ 4.104297] usb usb3: Manufacturer: Linux 2.6.37-rc2+ ehci_hcd [ 4.104339] usb usb3: SerialNumber: 0000:00:1a.7 [ 4.104462] usb usb3: usb_probe_device [ 4.104465] usb usb3: configuration #1 chosen from 1 choice [ 4.104472] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 4.104495] hub 3-0:1.0: usb_probe_interface [ 4.104497] hub 3-0:1.0: usb_probe_interface - got id [ 4.104499] hub 3-0:1.0: USB hub found [ 4.104542] hub 3-0:1.0: 6 ports detected [ 4.104582] hub 3-0:1.0: standalone hub [ 4.104584] hub 3-0:1.0: no power switching (usb 1.0) [ 4.104585] hub 3-0:1.0: individual port over-current protection [ 4.104587] hub 3-0:1.0: power on to power good time: 20ms [ 4.104590] hub 3-0:1.0: local power source is good [ 4.104592] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 4.104619] drivers/usb/core/inode.c: creating file '001' [ 4.104639] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 4.104641] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 4.104681] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.104793] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.104796] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.104840] drivers/usb/core/inode.c: creating file '004' [ 4.104844] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 4.128018] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.128023] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 4.128045] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.128087] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.131978] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.131979] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 4.132004] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe3fa000 [ 4.132056] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.135944] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 4.144008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.144070] usb usb4: default language 0x0409 [ 4.144077] usb usb4: udev 1, busnum 4, minor = 384 [ 4.144080] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.144124] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.144181] usb usb4: Product: EHCI Host Controller [ 4.144236] usb usb4: Manufacturer: Linux 2.6.37-rc2+ ehci_hcd [ 4.144275] usb usb4: SerialNumber: 0000:00:1d.7 [ 4.144351] usb usb4: usb_probe_device [ 4.144353] usb usb4: configuration #1 chosen from 1 choice [ 4.144358] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 4.144384] hub 4-0:1.0: usb_probe_interface [ 4.144386] hub 4-0:1.0: usb_probe_interface - got id [ 4.144387] hub 4-0:1.0: USB hub found [ 4.144431] hub 4-0:1.0: 6 ports detected [ 4.144469] hub 4-0:1.0: standalone hub [ 4.144470] hub 4-0:1.0: no power switching (usb 1.0) [ 4.144472] hub 4-0:1.0: individual port over-current protection [ 4.144473] hub 4-0:1.0: power on to power good time: 20ms [ 4.144476] hub 4-0:1.0: local power source is good [ 4.144478] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 4.144503] drivers/usb/core/inode.c: creating file '001' [ 4.144563] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.144632] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.144635] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.144695] drivers/usb/core/inode.c: creating file '005' [ 4.144700] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.164028] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.172014] uhci_hcd 0000:00:1a.2: detected 2 ports [ 4.172058] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.172060] uhci_hcd 0000:00:1a.2: Performing full reset [ 4.172073] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 4.172081] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880 [ 4.172159] usb usb5: default language 0x0409 [ 4.172166] usb usb5: udev 1, busnum 5, minor = 512 [ 4.172168] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.172217] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.172281] usb usb5: Product: UHCI Host Controller [ 4.172326] usb usb5: Manufacturer: Linux 2.6.37-rc2+ uhci_hcd [ 4.172365] usb usb5: SerialNumber: 0000:00:1a.2 [ 4.172460] usb usb5: usb_probe_device [ 4.172463] usb usb5: configuration #1 chosen from 1 choice [ 4.172468] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 4.172490] hub 5-0:1.0: usb_probe_interface [ 4.172491] hub 5-0:1.0: usb_probe_interface - got id [ 4.172493] hub 5-0:1.0: USB hub found [ 4.172535] hub 5-0:1.0: 2 ports detected [ 4.172571] hub 5-0:1.0: standalone hub [ 4.172573] hub 5-0:1.0: no power switching (usb 1.0) [ 4.172574] hub 5-0:1.0: individual port over-current protection [ 4.172576] hub 5-0:1.0: power on to power good time: 2ms [ 4.172579] hub 5-0:1.0: local power source is good [ 4.172581] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 4.172596] drivers/usb/core/inode.c: creating file '001' [ 4.172623] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 4.172647] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.172692] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.172694] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.172735] drivers/usb/core/inode.c: creating file '006' [ 4.172738] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.176028] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.188012] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.188055] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.188057] uhci_hcd 0000:00:1d.0: Performing full reset [ 4.188069] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 4.188075] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000 [ 4.188144] usb usb6: default language 0x0409 [ 4.188151] usb usb6: udev 1, busnum 6, minor = 640 [ 4.188153] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.188197] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.188267] usb usb6: Product: UHCI Host Controller [ 4.188305] usb usb6: Manufacturer: Linux 2.6.37-rc2+ uhci_hcd [ 4.188344] usb usb6: SerialNumber: 0000:00:1d.0 [ 4.188414] usb usb6: usb_probe_device [ 4.188416] usb usb6: configuration #1 chosen from 1 choice [ 4.188421] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 4.188439] hub 6-0:1.0: usb_probe_interface [ 4.188441] hub 6-0:1.0: usb_probe_interface - got id [ 4.188442] hub 6-0:1.0: USB hub found [ 4.188481] hub 6-0:1.0: 2 ports detected [ 4.188517] hub 6-0:1.0: standalone hub [ 4.188518] hub 6-0:1.0: no power switching (usb 1.0) [ 4.188519] hub 6-0:1.0: individual port over-current protection [ 4.188521] hub 6-0:1.0: power on to power good time: 2ms [ 4.188524] hub 6-0:1.0: local power source is good [ 4.188525] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 4.188540] drivers/usb/core/inode.c: creating file '001' [ 4.188565] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 4.188577] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.188621] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.188624] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.188664] drivers/usb/core/inode.c: creating file '007' [ 4.188667] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.204011] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.204030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.204061] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.204063] uhci_hcd 0000:00:1d.1: Performing full reset [ 4.204075] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 4.204092] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080 [ 4.204161] usb usb7: default language 0x0409 [ 4.204168] usb usb7: udev 1, busnum 7, minor = 768 [ 4.204170] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.204219] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.204272] usb usb7: Product: UHCI Host Controller [ 4.204310] usb usb7: Manufacturer: Linux 2.6.37-rc2+ uhci_hcd [ 4.204349] usb usb7: SerialNumber: 0000:00:1d.1 [ 4.204422] usb usb7: usb_probe_device [ 4.204424] usb usb7: configuration #1 chosen from 1 choice [ 4.204428] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 4.204448] hub 7-0:1.0: usb_probe_interface [ 4.204450] hub 7-0:1.0: usb_probe_interface - got id [ 4.204451] hub 7-0:1.0: USB hub found [ 4.204490] hub 7-0:1.0: 2 ports detected [ 4.204526] hub 7-0:1.0: standalone hub [ 4.204527] hub 7-0:1.0: no power switching (usb 1.0) [ 4.204528] hub 7-0:1.0: individual port over-current protection [ 4.204530] hub 7-0:1.0: power on to power good time: 2ms [ 4.204533] hub 7-0:1.0: local power source is good [ 4.204534] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 4.204548] drivers/usb/core/inode.c: creating file '001' [ 4.204574] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 4.204587] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.204631] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.204634] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.204675] drivers/usb/core/inode.c: creating file '008' [ 4.204678] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.216018] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.216060] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.216062] uhci_hcd 0000:00:1d.2: Performing full reset [ 4.216075] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 4.216080] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400 [ 4.216149] usb usb8: default language 0x0409 [ 4.216155] usb usb8: udev 1, busnum 8, minor = 896 [ 4.216158] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.216202] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.216261] usb usb8: Product: UHCI Host Controller [ 4.216299] usb usb8: Manufacturer: Linux 2.6.37-rc2+ uhci_hcd [ 4.216338] usb usb8: SerialNumber: 0000:00:1d.2 [ 4.216408] usb usb8: usb_probe_device [ 4.216410] usb usb8: configuration #1 chosen from 1 choice [ 4.216415] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 4.216433] hub 8-0:1.0: usb_probe_interface [ 4.216435] hub 8-0:1.0: usb_probe_interface - got id [ 4.216436] hub 8-0:1.0: USB hub found [ 4.216474] hub 8-0:1.0: 2 ports detected [ 4.216510] hub 8-0:1.0: standalone hub [ 4.216512] hub 8-0:1.0: no power switching (usb 1.0) [ 4.216513] hub 8-0:1.0: individual port over-current protection [ 4.216514] hub 8-0:1.0: power on to power good time: 2ms [ 4.216517] hub 8-0:1.0: local power source is good [ 4.216519] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 4.216533] drivers/usb/core/inode.c: creating file '001' [ 4.216558] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 4.244021] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001403 0 ACK POWER sig=k CSC CONNECT [ 4.244026] hub 4-0:1.0: port 6: status 0501 change 0001 [ 4.272020] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.288023] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.304029] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.311589] PM: Starting manual resume from disk [ 4.311628] PM: Hibernation image partition 8:5 present [ 4.311630] PM: Looking for hibernation image. [ 4.311758] PM: Image not found (code -22) [ 4.311760] PM: Hibernation image not present or could not be loaded. [ 4.315641] EXT3-fs (sda1): recovery required on readonly filesystem [ 4.315733] EXT3-fs (sda1): write access will be enabled during recovery [ 4.316018] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00 [ 4.330145] EXT3-fs: barriers not enabled [ 4.344045] hub 4-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 4.344052] hub 4-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 4.344059] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion [ 4.358248] kjournald starting. Commit interval 5 seconds [ 4.358302] EXT3-fs (sda1): recovery complete [ 4.359155] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 4.400015] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 4.400033] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 4.416011] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.420019] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 4.420027] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00 [ 4.420034] hub 8-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 4.548016] hub 8-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 4.660013] usb 8-2: new low speed USB device using uhci_hcd and address 2 [ 4.814147] usb 8-2: skipped 1 descriptor after interface [ 4.819148] usb 8-2: default language 0x0409 [ 4.828148] usb 8-2: udev 2, busnum 8, minor = 897 [ 4.828151] usb 8-2: New USB device found, idVendor=04b3, idProduct=310c [ 4.828197] usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.828245] usb 8-2: Product: USB Optical Mouse [ 4.828345] usb 8-2: usb_probe_device [ 4.828348] usb 8-2: configuration #1 chosen from 1 choice [ 4.831151] usb 8-2: adding 8-2:1.0 (config #1, interface 0) [ 4.831217] drivers/usb/core/inode.c: creating file '002' [ 5.112015] usb usb1: suspend_rh (auto-stop) [ 5.112039] usb usb2: suspend_rh (auto-stop) [ 5.360011] usb usb5: suspend_rh (auto-stop) [ 5.360033] usb usb6: suspend_rh (auto-stop) [ 5.360051] usb usb7: suspend_rh (auto-stop) [ 6.784015] hub 1-0:1.0: hub_suspend [ 6.784022] usb usb1: bus auto-suspend [ 6.784024] usb usb1: suspend_rh [ 6.784039] hub 2-0:1.0: hub_suspend [ 6.784043] usb usb2: bus auto-suspend [ 6.784045] usb usb2: suspend_rh [ 6.800014] hub 3-0:1.0: hub_suspend [ 6.800020] usb usb3: bus auto-suspend [ 6.800023] ehci_hcd 0000:00:1a.7: suspend root hub [ 6.800042] hub 5-0:1.0: hub_suspend [ 6.800046] usb usb5: bus auto-suspend [ 6.800048] usb usb5: suspend_rh [ 6.800061] hub 6-0:1.0: hub_suspend [ 6.800065] usb usb6: bus auto-suspend [ 6.800067] usb usb6: suspend_rh [ 6.800079] hub 7-0:1.0: hub_suspend [ 6.800083] usb usb7: bus auto-suspend [ 6.800085] usb usb7: suspend_rh [ 6.800098] hub 4-0:1.0: hub_suspend [ 6.800101] usb usb4: bus auto-suspend [ 6.800103] ehci_hcd 0000:00:1d.7: suspend root hub [ 8.389830] udev: starting version 141 [ 8.865758] iTCO_vendor_support: vendor-support=0 [ 8.897622] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 8.897765] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 8.897874] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.909011] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset [ 8.909163] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 8.910553] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 8.915152] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 8.915242] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 9.017879] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.044376] udev: renamed network interface eth0 to eth1 [ 9.054251] usbhid 8-2:1.0: usb_probe_interface [ 9.054254] usbhid 8-2:1.0: usb_probe_interface - got id [ 9.067360] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4 [ 9.067596] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 9.067794] usbcore: registered new interface driver usbhid [ 9.067838] usbhid: USB HID core driver [ 9.699170] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.699348] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 9.699367] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.889426] lp: driver loaded but no devices found [ 9.982198] Adding 9936164k swap on /dev/sda5. Priority:-1 extents:1 across:9936164k [ 10.289789] EXT3-fs (sda1): using internal journal [ 43.717259] r8169 0000:02:00.0: eth1: link up [ 43.717264] r8169 0000:02:00.0: eth1: link up [ 54.152003] eth1: no IPv6 routers present [ 128.410940] netconsole: local port 6665 [ 128.410983] netconsole: local IP 0.0.0.0 [ 128.411025] netconsole: interface 'eth1' [ 128.411075] netconsole: remote port 6666 [ 128.411113] netconsole: remote IP 192.168.1.138 [ 128.411153] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 128.411196] netconsole: local IP 192.168.1.8 [ 128.510838] console [netcon0] enabled [ 128.510874] netconsole: network logging started [ 135.186073] klogd[2733]: segfault at 0 ip 00007fab15615c07 sp 00007fff159be780 error 4 in libc-2.9.so[7fab155ae000+168000]