| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AANLkTi=UNGfPxp+7-cCu8U=g2CyEQJ5npjJjzEbYCO84@mail.gmail.com>
Date: Wed, 24 Nov 2010 20:59:26 +0530
From: Anirudh Ghayal <anirudhghayal@...il.com>
To: fabien.marteau@...adeus.com
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Scott Moreau <oreaus@...il.com>, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] input: joystick: Adding Austria Microsystem AS5011
joystick driver
Hi Fabien,
A few comments --
On Tue, Nov 23, 2010 at 10:06 PM, Fabien Marteau
<fabien.marteau@...adeus.com> wrote:
> Driver for EasyPoint AS5011 2 axis joystick chip. This chip is plugged
> on an I2C bus. It as been tested on ARM processor (i.MX27).
>
> Signed-off-by: Fabien Marteau <fabien.marteau@...adeus.com>
> ---
> drivers/input/joystick/Kconfig | 9 +
> drivers/input/joystick/Makefile | 1 +
> drivers/input/joystick/as5011.c | 454
> +++++++++++++++++++++++++++++++++++++++
> include/linux/as5011.h | 72 ++++++
> 4 files changed, 536 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/joystick/as5011.c
> create mode 100644 include/linux/as5011.h
>
> diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
> index 5b59616..5fad03e 100644
> --- a/drivers/input/joystick/Kconfig
> +++ b/drivers/input/joystick/Kconfig
> @@ -255,6 +255,15 @@ config JOYSTICK_AMIGA
> To compile this driver as a module, choose M here: the
> module will be called amijoy.
>
> +config JOYSTICK_AS5011
> + tristate "Austria Microsystem AS5011 joystick"
> + depends on I2C
> + help
> + Say Y here if you have an AS5011 digital joystick.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called as5011.
> +
> config JOYSTICK_JOYDUMP
> tristate "Gameport data dumper"
> select GAMEPORT
> diff --git a/drivers/input/joystick/Makefile
> b/drivers/input/joystick/Makefile
> index f3a8cbe..92dc0de 100644
> --- a/drivers/input/joystick/Makefile
> +++ b/drivers/input/joystick/Makefile
> @@ -7,6 +7,7 @@
> obj-$(CONFIG_JOYSTICK_A3D) += a3d.o
> obj-$(CONFIG_JOYSTICK_ADI) += adi.o
> obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o
> +obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o
> obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o
> obj-$(CONFIG_JOYSTICK_COBRA) += cobra.o
> obj-$(CONFIG_JOYSTICK_DB9) += db9.o
> diff --git a/drivers/input/joystick/as5011.c
> b/drivers/input/joystick/as5011.c
> new file mode 100644
> index 0000000..db0f129
> --- /dev/null
> +++ b/drivers/input/joystick/as5011.c
> @@ -0,0 +1,454 @@
> +/*
> + * Copyright (c) 2010 Fabien Marteau <fabien.marteau@...adeus.com>
> + *
> + * Sponsored by ARMadeus Systems
> + */
> +
> +/*
> + * Driver for Austria Microsystems joysticks AS5011
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + * TODO:
> + * - Manage power mode
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/string.h>
> +#include <linux/list.h>
> +#include <linux/sysfs.h>
> +#include <linux/ctype.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/mutex.h>
> +
> +#include <linux/input.h>
> +#include <linux/gpio.h>
> +#include <linux/workqueue.h>
> +
> +#include <linux/as5011.h>
> +#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
> +
> +MODULE_AUTHOR("Fabien Marteau <fabien.marteau@...adeus.com>");
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> +
> +#define SIZE_NAME 30
> +#define AS5011_MAX_AXIS 80
> +#define AS5011_MIN_AXIS (-80)
> +#define AS5011_FUZZ 8
> +#define AS5011_FLAT 40
> +
> +static int g_num = 1; /* device counter */
> +
> +static signed char as5011_i2c_read(struct i2c_client *client,
> + uint8_t aRegAddr);
> +static int as5011_i2c_write(struct i2c_client *client,
> + uint8_t aRegAddr,
> + uint8_t aValue);
> +
> +/*
> + * interrupts operations
> + */
> +
> +static irqreturn_t button_interrupt(int irq, void *dev_id)
> +{
> + struct as5011_platform_data *plat_dat =
> + (struct as5011_platform_data *)dev_id;
> + int ret;
> +
> + ret = gpio_get_value(plat_dat->button_gpio);
> + if (ret)
> + input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 0);
> + else
> + input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 1);
> + input_sync(plat_dat->input_dev);
> + return IRQ_HANDLED;
> +}
> +
> +static void as5011_update_axes(struct work_struct *work)
> +{
> + struct as5011_platform_data *plat_dat =
> + container_of(work,
> + struct as5011_platform_data,
> + update_axes_work);
> + signed char x, y;
> +
> + x = as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
> + y = as5011_i2c_read(plat_dat->i2c_client, AS5011_Y_RES_INT);
What if the read call returns an error ?
> + input_report_abs(plat_dat->input_dev, ABS_X, x);
> + input_report_abs(plat_dat->input_dev, ABS_Y, y);
> + input_sync(plat_dat->input_dev);
> +}
> +
> +static irqreturn_t as5011_int_interrupt(int irq, void *dev_id)
> +{
> + struct as5011_platform_data *plat_dat =
> + (struct as5011_platform_data *)dev_id;
> +
> + queue_work(plat_dat->workqueue, &plat_dat->update_axes_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/*
> + * I2C bus operation
> + */
> +
> +static int as5011_i2c_write(struct i2c_client *client,
> + uint8_t aRegAddr,
> + uint8_t aValue)
> +{
> + int ret;
> + uint8_t data[2] = { aRegAddr, aValue };
> + struct i2c_msg msg = { client->addr,
> + I2C_M_IGNORE_NAK,
> + 2,
> + (uint8_t *)data };
> +
> + ret = i2c_transfer(client->adapter, &msg, 1);
> + if (ret < 0)
> + return -EINVAL;
> + return 1;
> +}
> +
> +static signed char as5011_i2c_read(struct i2c_client *client,
> + uint8_t aRegAddr)
> +{
> + int ret;
> + uint8_t data[2];
> + struct i2c_msg msg_set[2];
> + struct i2c_msg msg1 = { client->addr,
> + I2C_M_REV_DIR_ADDR,
> + 1,
> + (uint8_t *)data};
> + struct i2c_msg msg2 = { client->addr,
> + I2C_M_RD|I2C_M_NOSTART,
> + 1,
> + (uint8_t *)data};
> +
> + data[0] = aRegAddr;
> + msg_set[0] = msg1;
> + msg_set[1] = msg2;
> +
> + ret = i2c_transfer(client->adapter, msg_set, 2);
> + if (ret < 0)
> + return -EINVAL;
> +
> + if (data[0] & 0x80)
> + return -1*(1+(~data[0]));
> + else
> + return data[0];
> +}
> +
> +static int as5011_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
__devinit as5011_probe()
> + struct as5011_platform_data *plat_dat = client->dev.platform_data;
> + int retval = 0;
> +
> + plat_dat->num = g_num;
> + g_num++;
> +
> + retval = snprintf(plat_dat->workqueue_name,
> + SIZE_NAME,
> + "as5011_%d_workqueue", plat_dat->num);
> + if (retval < 0) {
> + dev_err(&client->dev, "as5011: Failed to give workqueue name\n");
> + retval = -1;
> + goto workqueue_name_error;
> + }
> + plat_dat->workqueue =
> + create_singlethread_workqueue(plat_dat->workqueue_name);
> + if (plat_dat->workqueue == NULL) {
> + dev_err(&client->dev, "as5011: Failed to create workqueue\n");
> + retval = -EINVAL;
> + goto workqueue_create_error;
> + }
> +
> + INIT_WORK(&plat_dat->update_axes_work, as5011_update_axes);
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_PROTOCOL_MANGLING)) {
> + dev_err(&client->dev,
> + "i2c bus does not support protocol mangling, as5011 can't work\n");
> + retval = -ENODEV;
> + goto i2c_protocol_error;
> + }
> + plat_dat->i2c_client = client;
> +
> + plat_dat->input_dev = input_allocate_device();
> + if (plat_dat->input_dev < 0) {
> + dev_err(&client->dev,
> + "not enough memory for input devices structure\n");
> + retval = -ENOMEM;
> + goto input_allocate_device_error;
> + }
> +
> + plat_dat->input_dev->name = "Austria Microsystem as5011 joystick";
> + plat_dat->input_dev->uniq = "Austria0";
> + plat_dat->input_dev->id.bustype = BUS_I2C;
> + plat_dat->input_dev->phys = "/dev/input/event0";
> + plat_dat->input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> + plat_dat->input_dev->keybit[BIT_WORD(BTN_JOYSTICK)] =
> + BIT_MASK(BTN_JOYSTICK);
> +
> + input_set_abs_params(plat_dat->input_dev,
> + ABS_X,
> + AS5011_MIN_AXIS,
> + AS5011_MAX_AXIS,
> + AS5011_FUZZ,
> + AS5011_FLAT);
> + input_set_abs_params(plat_dat->input_dev,
> + ABS_Y,
> + AS5011_MIN_AXIS,
> + AS5011_MAX_AXIS,
> + AS5011_FUZZ,
> + AS5011_FLAT);
> +
> + plat_dat->button_irq_name =
> + kmalloc(sizeof(unsigned char)*SIZE_NAME,
> + GFP_KERNEL);
> + if (plat_dat->button_irq_name == NULL) {
> + dev_err(&client->dev,
> + "not enough memory for input devices irq name\n");
> + retval = -ENOMEM;
> + goto input_allocate_device_name_error;
> + }
> +
> +
> + retval = snprintf(plat_dat->button_irq_name,
> + SIZE_NAME,
> + "as5011_%d_button",
> + plat_dat->num);
> + if (retval < 0) {
> + dev_err(&client->dev, "as5011: Failed to give button irq name\n");
> + retval = -EINVAL;
> + goto button_irq_name_error;
> + }
> +
> + if (request_irq(plat_dat->button_irq, button_interrupt,
> + 0, plat_dat->button_irq_name, (void *)plat_dat)) {
> + dev_err(&client->dev, "as5011: Can't allocate irq %d\n",
> + plat_dat->button_irq);
> + retval = -EBUSY;
> + goto request_irq_error;
> + }
> +
> + plat_dat->int_irq_name =
> + kmalloc(sizeof(unsigned char)*SIZE_NAME,
> + GFP_KERNEL);
> + if (plat_dat->int_irq_name == NULL) {
> + dev_err(&client->dev,
> + "not enough memory for input devices int irq name\n");
> + retval = -ENOMEM;
> + goto input_allocate_int_device_name_error;
> + }
> +
> + retval = snprintf(plat_dat->int_irq_name,
> + SIZE_NAME,
> + "as5011_%d_int",
> + plat_dat->num);
> + if (retval < 0) {
> + dev_err(&client->dev, "as5011: Failed to give int irq name\n");
> + retval = -EINVAL;
> + goto int_irq_name_error;
> + }
> +
> +
> + if (request_irq(plat_dat->int_irq, as5011_int_interrupt,
> + 0, plat_dat->int_irq_name, (void *)plat_dat)) {
How about using request_any_context_irq() ?
> + dev_err(&client->dev, "as5011: Can't allocate int irq %d\n",
> + plat_dat->int_irq);
> + retval = -EBUSY;
> + goto request_int_irq_error;
> + }
> +
> + retval = input_register_device(plat_dat->input_dev);
Its better to register your device at the end, after all the initialization.
> + if (retval) {
> + dev_err(&client->dev, "as5011: Failed to register device\n");
> + retval = -EINVAL;
> + goto input_register_device_error;
> + }
> +
> + retval = plat_dat->init_gpio();
Please check if the function pointer is NULL.
> + if (retval < 0) {
> + dev_err(&client->dev, "as5011: Failed to init gpios\n");
> + retval = -EINVAL;
> + goto init_gpio_error;
> + }
> +
> + /* chip soft reset */
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_CTRL1,
> + AS5011_CTRL1_SOFT_RST);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: soft reset failed\n");
> + retval = -EINVAL;
> + goto soft_reset_error;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_CTRL1,
> + AS5011_CTRL1_LP_PULSED |
> + AS5011_CTRL1_LP_ACTIVE |
> + AS5011_CTRL1_INT_ACT_EN
> + );
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: power config failed\n");
> + retval = -EINVAL;
> + goto soft_reset_error;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_CTRL2,
> + AS5011_CTRL2_INV_SPINNING);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: can't invert spinning\n");
> + retval = -EINVAL;
> + goto invert_spinning_error;
> + }
> +
> + /* write threshold */
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_XP,
> + plat_dat->Xp);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: can't write threshold\n");
> + retval = -EINVAL;
> + goto threshold_error;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_XN,
> + plat_dat->Xn);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: can't write threshold\n");
> + retval = -EINVAL;
> + goto threshold_error;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_YP,
> + plat_dat->Yp);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: can't write threshold\n");
> + retval = -EINVAL;
> + goto threshold_error;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_YN,
> + plat_dat->Yn);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "as5011: can't write threshold\n");
> + retval = -EINVAL;
> + goto threshold_error;
> + }
> +
> + /* to free irq gpio in chip*/
> + as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
> +
> + queue_work(plat_dat->workqueue, &plat_dat->update_axes_work);
> +
> + return 0;
> +
> + /* Error management */
> +threshold_error:
> +invert_spinning_error:
> +soft_reset_error:
> + plat_dat->exit_gpio();
Please check if the function pointer is NULL.
> +init_gpio_error:
> + input_unregister_device(plat_dat->input_dev);
> +input_register_device_error:
> + free_irq(plat_dat->int_irq, as5011_int_interrupt);
> +request_int_irq_error:
> +int_irq_name_error:
> + kfree(plat_dat->int_irq_name);
> +input_allocate_int_device_name_error:
> + free_irq(plat_dat->button_irq, button_interrupt);
> +request_irq_error:
> +button_irq_name_error:
> + kfree(plat_dat->button_irq_name);
> +input_allocate_device_name_error:
> + input_free_device(plat_dat->input_dev);
> +input_allocate_device_error:
> +i2c_protocol_error:
> + destroy_workqueue(plat_dat->workqueue);
> +workqueue_create_error:
> +workqueue_name_error:
> + return retval;
> +}
> +static int as5011_remove(struct i2c_client *client)
> +{
> + struct as5011_platform_data *plat_dat = client->dev.platform_data;
> +
> + destroy_workqueue(plat_dat->workqueue);
> + input_unregister_device(plat_dat->input_dev);
> + free_irq(plat_dat->button_irq, plat_dat);
> + free_irq(plat_dat->int_irq, plat_dat);
> + kfree(plat_dat->button_irq_name);
> + input_free_device(plat_dat->input_dev);
> + plat_dat->exit_gpio();
Same here.
> +
> + return 0;
> +}
> +static const struct i2c_device_id as5011_id[] = {
> + { "as5011", 0 },
> + { }
> +};
> +
> +static struct i2c_driver as5011_driver = {
> + .driver = {
> + .name = "as5011",
> + },
> + .probe = as5011_probe,
> + .remove = as5011_remove,
__devexit_p (as5011_remove)
> + .id_table = as5011_id,
> +};
> +
> +/*
> + * Module initialization
> + */
> +
> +static int __init as5011_init(void)
> +{
> + return i2c_add_driver(&as5011_driver);
> +}
> +
> +static void __exit as5011_exit(void)
> +{
> + i2c_del_driver(&as5011_driver);
> +}
> +
> +module_init(as5011_init);
> +module_exit(as5011_exit);
> diff --git a/include/linux/as5011.h b/include/linux/as5011.h
> new file mode 100644
> index 0000000..7db0a75
> --- /dev/null
> +++ b/include/linux/as5011.h
> @@ -0,0 +1,72 @@
> +#ifndef _AS5011_H
> +#define _AS5011_H
> +
> +/*
> + * Copyright (c) 2010 Fabien Marteau
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + */
> +
> +#define AS5011_MAX_NAME_LENGTH 64
> +#define AS5011_MAX_CNAME_LENGTH 16
> +#define AS5011_MAX_PHYS_LENGTH 64
> +#define AS5011_MAX_LENGTH 64
> +
> +/* registers */
> +#define AS5011_CTRL1 0x76
> +#define AS5011_CTRL2 0x75
> +#define AS5011_XP 0x43
> +#define AS5011_XN 0x44
> +#define AS5011_YP 0x53
> +#define AS5011_YN 0x54
> +#define AS5011_X_REG 0x41
> +#define AS5011_Y_REG 0x42
> +#define AS5011_X_RES_INT 0x51
> +#define AS5011_Y_RES_INT 0x52
> +
> +/* CTRL1 bits */
> +#define AS5011_CTRL1_LP_PULSED 0x80
> +#define AS5011_CTRL1_LP_ACTIVE 0x40
> +#define AS5011_CTRL1_LP_CONTINUE 0x20
> +#define AS5011_CTRL1_INT_WUP_EN 0x10
> +#define AS5011_CTRL1_INT_ACT_EN 0x08
> +#define AS5011_CTRL1_EXT_CLK_EN 0x04
> +#define AS5011_CTRL1_SOFT_RST 0x02
> +#define AS5011_CTRL1_DATA_VALID 0x01
> +
> +/* CTRL2 bits */
> +#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08
> +#define AS5011_CTRL2_RC_BIAS_ON 0x04
> +#define AS5011_CTRL2_INV_SPINNING 0x02
> +
> +
> +struct as5011_platform_data {
> + /* public */
> + int button_gpio;
> + int button_irq;
> + int int_gpio;
> + int int_irq;
> + char Xp, Xn; /* threshold for x axis */
> + char Yp, Yn; /* threshold for y axis */
> +
> + int (*init_gpio)(void); /* init interrupts gpios */
> + void (*exit_gpio)(void);/* exit gpios */
> +
> + /* private */
> + int num;
> + struct input_dev *input_dev;
> + struct i2c_client *i2c_client;
> + unsigned char *button_irq_name;
> + unsigned char *int_irq_name;
> + char name[AS5011_MAX_NAME_LENGTH];
> + char cname[AS5011_MAX_CNAME_LENGTH];
> + char phys[AS5011_MAX_PHYS_LENGTH];
> + unsigned char data[AS5011_MAX_LENGTH];
> + char workqueue_name[AS5011_MAX_NAME_LENGTH];
> + struct workqueue_struct *workqueue;
> + struct work_struct update_axes_work;
> +};
> +
> +#endif /* _AS5011_H */
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists