| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 25 Nov 2010 16:09:29 +0000
From: Jamie Iles <jamie@...ieiles.com>
To: linux-kernel@...r.kernel.org
Cc: Jamie Iles <jamie@...ieiles.com>, Wim Van Sebroeck <wim@...ana.be>,
linux-watchdog@...r.kernel.org
Subject: [PATCH] watchdog: add support for the Synopsys DesignWare WDT
The Synopsys DesignWare watchdog is found in several ARM based systems
and provides a choice of 16 timeout periods depending on the clock
input. The watchdog cannot be disabled once started.
Cc: Wim Van Sebroeck <wim@...ana.be>
Cc: linux-watchdog@...r.kernel.org
Signed-off-by: Jamie Iles <jamie@...ieiles.com>
---
drivers/watchdog/Kconfig | 9 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/dw_wdt.c | 290 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 300 insertions(+), 0 deletions(-)
create mode 100644 drivers/watchdog/dw_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4a29104..19a056c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -331,6 +331,15 @@ config IMX2_WDT
To compile this driver as a module, choose M here: the
module will be called imx2_wdt.
+config DW_WATCHDOG
+ tristate "Synopsys DesignWare watchdog"
+ select WATCHDOG_NOWAYOUT
+ help
+ Say Y here if to include support for the Synopsys DesignWare
+ watchdog timer found in many ARM chips.
+ To compile this driver as a module, choose M here: the
+ module will be called dw_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 4b0ef38..3b3da4a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
new file mode 100644
index 0000000..180840a
--- /dev/null
+++ b/drivers/watchdog/dw_wdt.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2010 Picochip Ltd., Jamie Iles
+ * http://www.picochip.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file implements a driver for the Synopsys DesignWare watchdog device
+ * in the many ARM subsystems. The watchdog has 16 different timeout periods
+ * and these are a function of the input clock frequency.
+ */
+#define pr_fmt(fmt) "dw_wdt: " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define WDOG_CONTROL_REG_OFFSET 0x00
+#define WDOG_TIMEOUT_RANGE_REG_OFFSET 0x04
+#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08
+#define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c
+
+/* The maximum TOP (timeout period) value that can be set in the watchdog. */
+#define DW_WDT_MAX_TOP 15
+
+static struct {
+ spinlock_t lock;
+ void __iomem *regs;
+ struct clk *clk;
+} dw_wdt;
+
+static inline int dw_wdt_is_enabled(void)
+{
+#define WDOG_CONTROL_REG_WDT_EN_MASK 0x01
+ return readl(dw_wdt.regs + WDOG_CONTROL_REG_OFFSET) &
+ WDOG_CONTROL_REG_WDT_EN_MASK;
+}
+
+static inline int dw_wdt_top_in_seconds(unsigned top)
+{
+ /*
+ * There are 16 possible timeout values in 0..15 where the number of
+ * cycles is 2 ^ (16 + i) and the watchdog counts down.
+ */
+ return (1 << (16 + top)) / clk_get_rate(dw_wdt.clk);
+}
+
+static int dw_wdt_set_top(unsigned top_s)
+{
+ int i, top_val = -1;
+
+ /*
+ * Iterate over the timeout values until we find the closest match. We
+ * always look for >=.
+ */
+ for (i = 0; i <= DW_WDT_MAX_TOP; ++i)
+ if (dw_wdt_top_in_seconds(i) >= top_s) {
+ top_val = i;
+ break;
+ }
+
+ /*
+ * If we didn't find a suitable value, it must have been too large. Go
+ * with the biggest that we can.
+ */
+ if (top_val < 0)
+ top_val = DW_WDT_MAX_TOP;
+
+ /* Set the new value in the watchdog. */
+ writel(top_val, dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+
+ return dw_wdt_top_in_seconds(top_val);
+}
+
+static int dw_wdt_get_top(void)
+{
+ int top = readl(dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF;
+
+ return dw_wdt_top_in_seconds(top);
+}
+
+static void dw_wdt_keepalive(void)
+{
+#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76
+ writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt.regs +
+ WDOG_COUNTER_RESTART_REG_OFFSET);
+}
+
+static int dw_wdt_open(struct inode *inode, struct file *filp)
+{
+ /* Make sure we don't get unloaded. */
+ __module_get(THIS_MODULE);
+
+ spin_lock(&dw_wdt.lock);
+ if (!dw_wdt_is_enabled()) {
+ /*
+ * The watchdog is not currently enabled. Set the timeout to
+ * the maximum and then start it.
+ */
+ dw_wdt_set_top(DW_WDT_MAX_TOP);
+ writel(WDOG_CONTROL_REG_WDT_EN_MASK,
+ dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
+ }
+ spin_unlock(&dw_wdt.lock);
+
+ return nonseekable_open(inode, filp);
+}
+
+ssize_t dw_wdt_write(struct file * filp, const char __user *buf, size_t len,
+ loff_t *offset)
+{
+ dw_wdt_keepalive();
+
+ return len;
+}
+
+static u32 dw_wdt_time_left(void)
+{
+ return readl(dw_wdt.regs + WDOG_CURRENT_COUNT_REG_OFFSET) /
+ clk_get_rate(dw_wdt.clk);
+}
+
+static const struct watchdog_info dw_wdt_ident = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+ .identity = "Synopsys DesignWare Watchdog",
+};
+
+static long dw_wdt_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ unsigned long val;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user((struct watchdog_info *)arg, &dw_wdt_ident,
+ sizeof(dw_wdt_ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, (int *)arg);
+
+ case WDIOC_KEEPALIVE:
+ dw_wdt_keepalive();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(val, (int __user *)arg))
+ return -EFAULT;
+ return put_user(dw_wdt_set_top(val), (int __user *)arg);
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(dw_wdt_get_top(), (int __user *)arg);
+
+ case WDIOC_GETTIMELEFT:
+ /* Get the time left until expiry. */
+ if (get_user(val, (int __user *)arg))
+ return -EFAULT;
+ return put_user(dw_wdt_time_left(), (int __user *)arg);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static int dw_wdt_release(struct inode *inode, struct file *filp)
+{
+ pr_crit("WATCHDOG: device closed - timer will not stop\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int dw_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ clk_disable(dw_wdt.clk);
+
+ return 0;
+}
+
+static int dw_wdt_resume(struct platform_device *pdev)
+{
+ int err = clk_enable(dw_wdt.clk);
+
+ if (err)
+ return err;
+
+ dw_wdt_keepalive();
+
+ return 0;
+}
+#else /* CONFIG_PM */
+#define dw_wdt_suspend NULL
+#define dw_wdt_resume NULL
+#endif /* CONFIG_PM */
+
+static struct file_operations wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = dw_wdt_open,
+ .write = dw_wdt_write,
+ .unlocked_ioctl = dw_wdt_ioctl,
+ .release = dw_wdt_release
+};
+
+static struct miscdevice dw_wdt_miscdev = {
+ .fops = &wdt_fops,
+ .name = "watchdog",
+ .minor = WATCHDOG_MINOR,
+};
+
+static int __devinit dw_wdt_drv_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!mem)
+ return -EINVAL;
+
+ dw_wdt.regs = devm_ioremap(&pdev->dev, mem->start,
+ resource_size(mem));
+ if (!dw_wdt.regs)
+ return -ENOMEM;
+
+ dw_wdt.clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR_OR_NULL(dw_wdt.clk))
+ return -ENODEV;
+ clk_enable(dw_wdt.clk);
+
+ ret = misc_register(&dw_wdt_miscdev);
+ if (ret)
+ goto register_failed;
+
+ return 0;
+
+register_failed:
+ clk_put(dw_wdt.clk);
+
+ return ret;
+}
+
+static int __devexit dw_wdt_drv_remove(struct platform_device *pdev)
+{
+ clk_disable(dw_wdt.clk);
+ clk_put(dw_wdt.clk);
+
+ misc_deregister(&dw_wdt_miscdev);
+
+ return 0;
+}
+
+static struct platform_driver dw_wdt_driver = {
+ .probe = dw_wdt_drv_probe,
+ .remove = __devexit_p(dw_wdt_drv_remove),
+ .suspend = dw_wdt_suspend,
+ .resume = dw_wdt_resume,
+ .driver = {
+ .name = "dw_wdt",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dw_wdt_watchdog_init(void)
+{
+ spin_lock_init(&dw_wdt.lock);
+
+ return platform_driver_register(&dw_wdt_driver);
+}
+
+static void __exit dw_wdt_watchdog_exit(void)
+{
+ platform_driver_unregister(&dw_wdt_driver);
+}
+
+module_init(dw_wdt_watchdog_init);
+module_exit(dw_wdt_watchdog_exit);
+
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("Synopsys DesignWare Watchdog Driver");
+MODULE_LICENSE("GPL");
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists