linux-kernel - 2.6.35 -> 2.6.36 panic when vlan and promisc with tg3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20101129201716.1d0257c4@xenia.leun.net>
Date:	Mon, 29 Nov 2010 20:17:16 +0100
From:	Michael Leun <lkml20101129@...ton.leun.net>
To:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: 2.6.35 -> 2.6.36 panic when vlan and promisc with tg3

Hi,

only kernel message I was able to capture on serial were:

UG: unable to handle kernel paging request at 01cc921c
IP: [<c034bfce>] vlan_hwaccel_do_receive+0x59/0xd0
*pdpt = 0000000036a2a001 *pde = 0000000000000000
Oops: 0002 [#1] SMP
last sysfs

Then machine dead.

In 2.6.35.x this did not happen (but vlans broken - cannot see vlan
tags with tcpdump),

To reproduce:

ip link set eth0 up
vconfig add eth0 2
ip link set eth0 promisc on

Machines with these ethernet cards I've seen to be affected:

Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit
Ethernet (rev a3)

Ethernet controller: Broadcom Corporation NetXtreme BCM5752M Gigabit
Ethernet PCI Express (rev 02)

Machine with this card is NOT affected (no vlan hw accel?):

Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
Ethernet PCI Express (rev 02)


-- 
MfG,

Michael Leun

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/