[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1291388753-14662-13-git-send-email-sundar.iyer@stericsson.com>
Date: Fri, 3 Dec 2010 20:35:45 +0530
From: Sundar Iyer <sundar.iyer@...ricsson.com>
To: <linux-arm-kernel@...ts.infradead.org>,
<dmitry.torokhov@...il.com>, <sameo@...ux.intel.com>,
<ben-linux@...ff.org>
Cc: <linux-input@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Sundar Iyer <sundar.iyer@...ricsson.com>
Subject: [PATCH 12/20] mfd/tc3589x: undo gpio module reset during chip init
Skip putting the GPIO module into a reset during the chip init. This makes
sure to preserve any existing GPIO configurations done by pre-kernel boot code.
Signed-off-by: Sundar Iyer <sundar.iyer@...ricsson.com>
---
drivers/mfd/tc3589x.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index e173f33..fd206fd 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -247,12 +247,15 @@ static int tc3589x_chip_init(struct tc3589x *tc3589x)
dev_info(tc3589x->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
- /* Put everything except the IRQ module into reset */
+ /*
+ * Put everything except the IRQ module into reset;
+ * also spare the GPIO module for any pin initialization
+ * done during pre-kernel boot
+ */
ret = tc3589x_reg_write(tc3589x, TC3589x_RSTCTRL,
TC3589x_RSTCTRL_TIMRST
| TC3589x_RSTCTRL_ROTRST
- | TC3589x_RSTCTRL_KBDRST
- | TC3589x_RSTCTRL_GPIRST);
+ | TC3589x_RSTCTRL_KBDRST);
if (ret < 0)
return ret;
--
1.7.2.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists