| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 4 Dec 2010 11:16:13 +0200
From: Pekka Enberg <penberg@...nel.org>
To: gregkh@...e.de
Cc: linux-kernel@...r.kernel.org, Pekka Enberg <penberg@...nel.org>,
Pavel Machek <pavel@....cz>
Subject: [PATCH 2/6] w35und: Rename wbhal_s.h to wbhal.h
This patch renames the wbhal_s.h header file to wbhal.h now that it contains
both structure and function definitions.
Cc: Pavel Machek <pavel@....cz>
Signed-off-by: Pekka Enberg <penberg@...nel.org>
---
drivers/staging/winbond/core.h | 2 +-
drivers/staging/winbond/mds.c | 2 +-
drivers/staging/winbond/mds_f.h | 2 +-
drivers/staging/winbond/mto.c | 2 +-
drivers/staging/winbond/phy_calibration.c | 2 +-
drivers/staging/winbond/phy_calibration.h | 2 +-
drivers/staging/winbond/reg.c | 2 +-
drivers/staging/winbond/wb35reg_f.h | 2 +-
drivers/staging/winbond/wb35rx_f.h | 2 +-
drivers/staging/winbond/wbhal.h | 525 +++++++++++++++++++++++++++++
drivers/staging/winbond/wbhal_s.h | 525 -----------------------------
drivers/staging/winbond/wbusb.c | 2 +-
12 files changed, 535 insertions(+), 535 deletions(-)
create mode 100644 drivers/staging/winbond/wbhal.h
delete mode 100644 drivers/staging/winbond/wbhal_s.h
diff --git a/drivers/staging/winbond/core.h b/drivers/staging/winbond/core.h
index 2b87a00..d7b3aca 100644
--- a/drivers/staging/winbond/core.h
+++ b/drivers/staging/winbond/core.h
@@ -4,7 +4,7 @@
#include <linux/wireless.h>
#include <linux/types.h>
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "mto.h"
#include "mac_structures.h"
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 2128e6e..9ac2c87 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -2,7 +2,7 @@
#include "mlmetxrx_f.h"
#include "mto.h"
#include "sysdef.h"
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "wblinux_f.h"
#include "wb35tx_f.h"
diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h
index 7f68dea..d902843 100644
--- a/drivers/staging/winbond/mds_f.h
+++ b/drivers/staging/winbond/mds_f.h
@@ -1,7 +1,7 @@
#ifndef __WINBOND_MDS_F_H
#define __WINBOND_MDS_F_H
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "core.h"
unsigned char Mds_initial(struct wbsoft_priv *adapter);
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 05d1262..1faebce 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -19,7 +19,7 @@
#include "sysdef.h"
#include "sme_api.h"
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "wb35reg_f.h"
#include "core.h"
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index 08cec74..0658b09 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -12,7 +12,7 @@
/****************** INCLUDE FILES SECTION ***********************************/
#include "sysdef.h"
#include "phy_calibration.h"
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "wb35reg_f.h"
#include "core.h"
diff --git a/drivers/staging/winbond/phy_calibration.h b/drivers/staging/winbond/phy_calibration.h
index 9fcdab1..84f6e84 100644
--- a/drivers/staging/winbond/phy_calibration.h
+++ b/drivers/staging/winbond/phy_calibration.h
@@ -1,7 +1,7 @@
#ifndef __WINBOND_PHY_CALIBRATION_H
#define __WINBOND_PHY_CALIBRATION_H
-#include "wbhal_s.h"
+#include "wbhal.h"
#define REG_AGC_CTRL1 0x1000
#define REG_AGC_CTRL2 0x1004
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 8df05c4..439d213 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1,5 +1,5 @@
#include "sysdef.h"
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "wb35reg_f.h"
#include "core.h"
diff --git a/drivers/staging/winbond/wb35reg_f.h b/drivers/staging/winbond/wb35reg_f.h
index bf23c10..95dc980 100644
--- a/drivers/staging/winbond/wb35reg_f.h
+++ b/drivers/staging/winbond/wb35reg_f.h
@@ -1,7 +1,7 @@
#ifndef __WINBOND_WB35REG_F_H
#define __WINBOND_WB35REG_F_H
-#include "wbhal_s.h"
+#include "wbhal.h"
/*
* ====================================
diff --git a/drivers/staging/winbond/wb35rx_f.h b/drivers/staging/winbond/wb35rx_f.h
index 98acce5..1fdf65e 100644
--- a/drivers/staging/winbond/wb35rx_f.h
+++ b/drivers/staging/winbond/wb35rx_f.h
@@ -2,7 +2,7 @@
#define __WINBOND_WB35RX_F_H
#include <net/mac80211.h>
-#include "wbhal_s.h"
+#include "wbhal.h"
//====================================
// Interface function declare
diff --git a/drivers/staging/winbond/wbhal.h b/drivers/staging/winbond/wbhal.h
new file mode 100644
index 0000000..821a1b3
--- /dev/null
+++ b/drivers/staging/winbond/wbhal.h
@@ -0,0 +1,525 @@
+#ifndef __WINBOND_WBHAL_S_H
+#define __WINBOND_WBHAL_S_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h> /* for ETH_ALEN */
+
+#define HAL_LED_SET_MASK 0x001c
+#define HAL_LED_SET_SHIFT 2
+
+/* supported RF type */
+#define RF_MAXIM_2825 0
+#define RF_MAXIM_2827 1
+#define RF_MAXIM_2828 2
+#define RF_MAXIM_2829 3
+#define RF_MAXIM_V1 15
+#define RF_AIROHA_2230 16
+#define RF_AIROHA_7230 17
+#define RF_AIROHA_2230S 18
+#define RF_WB_242 33
+#define RF_WB_242_1 34
+#define RF_DECIDE_BY_INF 255
+
+/*
+ * ----------------------------------------------------------------
+ * The follow define connect to upper layer
+ * User must modify for connection between HAL and upper layer
+ * ----------------------------------------------------------------
+ */
+
+/*
+ * ==============================
+ * Common define
+ * ==============================
+ */
+/* Bit 5 */
+#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20)
+
+/* Scan interval */
+#define SCAN_MAX_CHNL_TIME (50)
+
+/* For TxL2 Frame typr recognise */
+#define FRAME_TYPE_802_3_DATA 0
+#define FRAME_TYPE_802_11_MANAGEMENT 1
+#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
+#define FRAME_TYPE_802_11_CONTROL 3
+#define FRAME_TYPE_802_11_DATA 4
+#define FRAME_TYPE_PROMISCUOUS 5
+
+/* The follow definition is used for convert the frame------------ */
+#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */
+#define DOT_3_TYPE_OFFSET 12
+#define DOT_11_MAC_HEADER_SIZE 24
+#define DOT_11_SNAP_SIZE 6
+#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */
+#define DEFAULT_SIFSTIME 10
+#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
+#define DEFAULT_MSDU_LIFE_TIME 0xffff
+
+#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48)
+#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24)
+#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6)
+#define Tsym 4
+
+/* Frame Type of Bits (2, 3)----------------------------------- */
+#define MAC_TYPE_MANAGEMENT 0x00
+#define MAC_TYPE_CONTROL 0x04
+#define MAC_TYPE_DATA 0x08
+#define MASK_FRAGMENT_NUMBER 0x000F
+#define SEQUENCE_NUMBER_SHIFT 4
+
+#define HAL_WOL_TYPE_WAKEUP_FRAME 0x01
+#define HAL_WOL_TYPE_MAGIC_PACKET 0x02
+
+#define HAL_KEYTYPE_WEP40 0
+#define HAL_KEYTYPE_WEP104 1
+#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */
+#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */
+
+/* For VM state */
+enum {
+ VM_STOP = 0,
+ VM_RUNNING,
+ VM_COMPLETED
+};
+
+/*
+ * ================================
+ * Normal Key table format
+ * ================================
+ */
+
+/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
+#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */
+#define GROUP_KEY_START_INDEX 4
+#define MAPPING_KEY_START_INDEX 8
+
+/*
+ * =========================================
+ * Descriptor
+ * =========================================
+ */
+#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */
+#define FLAG_ERROR_TX_MASK 0x000000bf
+#define FLAG_ERROR_RX_MASK 0x0000083f
+
+#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */
+
+struct R00_descriptor {
+ union {
+ u32 value;
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 R00_packet_or_buffer_status:1;
+ u32 R00_packet_in_fifo:1;
+ u32 R00_RESERVED:2;
+ u32 R00_receive_byte_count:12;
+ u32 R00_receive_time_index:16;
+ };
+#else
+ struct {
+ u32 R00_receive_time_index:16;
+ u32 R00_receive_byte_count:12;
+ u32 R00_RESERVED:2;
+ u32 R00_packet_in_fifo:1;
+ u32 R00_packet_or_buffer_status:1;
+ };
+#endif
+ };
+};
+
+struct T00_descriptor {
+ union {
+ u32 value;
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 T00_first_mpdu:1; /* for hardware use */
+ u32 T00_last_mpdu:1; /* for hardware use */
+ u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
+ u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
+ u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */
+ u32 T00_tx_packet_id:4;
+ u32 T00_RESERVED:4;
+ u32 T00_header_length:6;
+ u32 T00_frame_length:12;
+ };
+#else
+ struct {
+ u32 T00_frame_length:12;
+ u32 T00_header_length:6;
+ u32 T00_RESERVED:4;
+ u32 T00_tx_packet_id:4;
+ u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */
+ u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
+ u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
+ u32 T00_last_mpdu:1; /* for hardware use */
+ u32 T00_first_mpdu:1; /* for hardware use */
+ };
+#endif
+ };
+};
+
+struct R01_descriptor {
+ union {
+ u32 value;
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 R01_RESERVED:3;
+ u32 R01_mod_type:1;
+ u32 R01_pre_type:1;
+ u32 R01_data_rate:3;
+ u32 R01_AGC_state:8;
+ u32 R01_LNA_state:2;
+ u32 R01_decryption_method:2;
+ u32 R01_mic_error:1;
+ u32 R01_replay:1;
+ u32 R01_broadcast_frame:1;
+ u32 R01_multicast_frame:1;
+ u32 R01_directed_frame:1;
+ u32 R01_receive_frame_antenna_selection:1;
+ u32 R01_frame_receive_during_atim_window:1;
+ u32 R01_protocol_version_error:1;
+ u32 R01_authentication_frame_icv_error:1;
+ u32 R01_null_key_to_authentication_frame:1;
+ u32 R01_icv_error:1;
+ u32 R01_crc_error:1;
+ };
+#else
+ struct {
+ u32 R01_crc_error:1;
+ u32 R01_icv_error:1;
+ u32 R01_null_key_to_authentication_frame:1;
+ u32 R01_authentication_frame_icv_error:1;
+ u32 R01_protocol_version_error:1;
+ u32 R01_frame_receive_during_atim_window:1;
+ u32 R01_receive_frame_antenna_selection:1;
+ u32 R01_directed_frame:1;
+ u32 R01_multicast_frame:1;
+ u32 R01_broadcast_frame:1;
+ u32 R01_replay:1;
+ u32 R01_mic_error:1;
+ u32 R01_decryption_method:2;
+ u32 R01_LNA_state:2;
+ u32 R01_AGC_state:8;
+ u32 R01_data_rate:3;
+ u32 R01_pre_type:1;
+ u32 R01_mod_type:1;
+ u32 R01_RESERVED:3;
+ };
+#endif
+ };
+};
+
+struct T01_descriptor {
+ union {
+ u32 value;
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 T01_rts_cts_duration:16;
+ u32 T01_fall_back_rate:3;
+ u32 T01_add_rts:1;
+ u32 T01_add_cts:1;
+ u32 T01_modulation_type:1;
+ u32 T01_plcp_header_length:1;
+ u32 T01_transmit_rate:3;
+ u32 T01_wep_id:2;
+ u32 T01_add_challenge_text:1;
+ u32 T01_inhibit_crc:1;
+ u32 T01_loop_back_wep_mode:1;
+ u32 T01_retry_abort_ebable:1;
+ };
+#else
+ struct {
+ u32 T01_retry_abort_ebable:1;
+ u32 T01_loop_back_wep_mode:1;
+ u32 T01_inhibit_crc:1;
+ u32 T01_add_challenge_text:1;
+ u32 T01_wep_id:2;
+ u32 T01_transmit_rate:3;
+ u32 T01_plcp_header_length:1;
+ u32 T01_modulation_type:1;
+ u32 T01_add_cts:1;
+ u32 T01_add_rts:1;
+ u32 T01_fall_back_rate:3;
+ u32 T01_rts_cts_duration:16;
+ };
+#endif
+ };
+};
+
+struct T02_descriptor {
+ union {
+ u32 value;
+#ifdef _BIG_ENDIAN_
+ struct {
+ u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
+ u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
+ u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
+ u32 T02_Tx_PktID:4;
+ u32 T02_MPDU_Cnt:4;
+ u32 T02_RTS_Cnt:4;
+ u32 T02_RESERVED:7;
+ u32 T02_transmit_complete:1;
+ u32 T02_transmit_abort_due_to_TBTT:1;
+ u32 T02_effective_transmission_rate:1;
+ u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
+ u32 T02_discard_due_to_null_wep_key:1;
+ u32 T02_RESERVED_1:1;
+ u32 T02_out_of_MaxTxMSDULiftTime:1;
+ u32 T02_transmit_abort:1;
+ u32 T02_transmit_fail:1;
+ };
+#else
+ struct {
+ u32 T02_transmit_fail:1;
+ u32 T02_transmit_abort:1;
+ u32 T02_out_of_MaxTxMSDULiftTime:1;
+ u32 T02_RESERVED_1:1;
+ u32 T02_discard_due_to_null_wep_key:1;
+ u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
+ u32 T02_effective_transmission_rate:1;
+ u32 T02_transmit_abort_due_to_TBTT:1;
+ u32 T02_transmit_complete:1;
+ u32 T02_RESERVED:7;
+ u32 T02_RTS_Cnt:4;
+ u32 T02_MPDU_Cnt:4;
+ u32 T02_Tx_PktID:4;
+ u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
+ u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
+ u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
+ };
+#endif
+ };
+};
+
+struct wb35_descriptor { /* Skip length = 8 DWORD */
+ /* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
+ u8 Descriptor_ID;
+ /* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
+ u8 RESERVED[3];
+
+ u16 FragmentThreshold;
+ u8 InternalUsed; /* Only can be used by operation of descriptor definition */
+ u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
+
+ u8 PreambleMode;/* 0: short 1:long */
+ u8 TxRate;
+ u8 FragmentCount;
+ u8 EapFix; /* For speed up key install */
+
+ /* For R00 and T00 ------------------------------ */
+ union {
+ struct R00_descriptor R00;
+ struct T00_descriptor T00;
+ };
+
+ /* For R01 and T01 ------------------------------ */
+ union {
+ struct R01_descriptor R01;
+ struct T01_descriptor T01;
+ };
+
+ /* For R02 and T02 ------------------------------ */
+ union {
+ u32 R02;
+ struct T02_descriptor T02;
+ };
+
+ /* For R03 and T03 ------------------------------ */
+ /* For software used */
+ union {
+ u32 R03;
+ u32 T03;
+ struct {
+ u8 buffer_number;
+ u8 buffer_start_index;
+ u16 buffer_total_size;
+ };
+ };
+
+ /* For storing the buffer */
+ u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
+ void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
+};
+
+
+#define DEFAULT_NULL_PACKET_COUNT 180000 /* 180 seconds */
+
+#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */
+#define MAX_RF_PARAMETER 32
+
+struct txvga_for_50 {
+ u8 ChanNo;
+ u8 TxVgaValue;
+};
+
+/*
+ * ==============================================
+ * Device related include
+ * ==============================================
+ */
+
+#include "wbusb_s.h"
+#include "wb35reg_s.h"
+#include "wb35tx_s.h"
+#include "wb35rx_s.h"
+
+/* For Hal using ============================================ */
+struct hw_data {
+ /* For compatible with 33 */
+ u32 revision;
+ u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */
+ u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */
+
+ /* For surprise remove */
+ u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */
+ u8 IsKeyPreSet;
+ u8 CalOneTime;
+
+ u8 VCO_trim;
+
+ u32 FragCount;
+ u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
+
+ /*
+ * ===============================================
+ * Definition for MAC address
+ * ===============================================
+ */
+ u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
+ u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
+
+ /*
+ * =========================================
+ * Definition for 802.11
+ * =========================================
+ */
+ u8 *bssid_pointer; /* Used by hal_get_bssid for return value */
+ u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
+ u8 ssid[32]; /* maximum ssid length is 32 byte */
+
+ u16 AID;
+ u8 ssid_length;
+ u8 Channel;
+
+ u16 ListenInterval;
+ u16 CapabilityInformation;
+
+ u16 BeaconPeriod;
+ u16 ProbeDelay;
+
+ u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */
+ u8 preamble;/* 0: short preamble, 1: long preamble */
+ u8 slot_time_select; /* 9 or 20 value */
+ u8 phy_type; /* Phy select */
+
+ u32 phy_para[MAX_RF_PARAMETER];
+ u32 phy_number;
+
+ u32 CurrentRadioSw; /* 0:On 1:Off */
+ u32 CurrentRadioHw; /* 0:On 1:Off */
+
+ u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */
+ u8 cwmin;
+ u8 desired_power_save;
+ u8 dtim; /* Is running dtim */
+ u8 mapping_key_replace_index; /* In Key table, the next index be replaced */
+
+ u16 MaxReceiveLifeTime;
+ u16 FragmentThreshold;
+ u16 FragmentThreshold_tmp;
+ u16 cwmax;
+
+ u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
+ u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
+ u8 CurrentDefaultKeyIndex;
+ u32 CurrentDefaultKeyLength;
+
+ /*
+ * ==================================================
+ * Variable for each module
+ * ==================================================
+ */
+ struct wb_usb WbUsb; /* Need WbUsb.h */
+ struct wb35_reg reg; /* Need Wb35Reg.h */
+ struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */
+ struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */
+
+ struct timer_list LEDTimer; /* For LED */
+
+ u32 LEDpoint; /* For LED */
+
+ u32 dto_tx_retry_count;
+ u32 dto_tx_frag_count;
+ u32 rx_ok_count[13]; /* index=0: total rx ok */
+ u32 rx_err_count[13]; /* index=0: total rx err */
+
+ /* for Tx debug */
+ u32 tx_TBTT_start_count;
+ u32 tx_ETR_count;
+ u32 tx_WepOn_false_count;
+ u32 tx_Null_key_count;
+ u32 tx_retry_count[8];
+
+ u8 PowerIndexFromEEPROM; /* For 2412MHz */
+ u8 power_index;
+ u8 IsWaitJoinComplete; /* TRUE: set join request */
+ u8 band;
+
+ u16 SoftwareSet;
+ u16 Reserved_s;
+
+ u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */
+
+ /* For Phy calibration */
+ s32 iq_rsdl_gain_tx_d2;
+ s32 iq_rsdl_phase_tx_d2;
+ u32 txvga_setting_for_cal;
+
+ u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
+ u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */
+ struct txvga_for_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
+
+ u16 Scan_Interval;
+ u16 RESERVED6;
+
+ /* LED control */
+ u32 LED_control;
+ /*
+ * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
+ * Gray_Led
+ * For Led gray setting
+ * Led
+ * 0: normal control,
+ * LED behavior will decide by EEPROM setting
+ * 1: Turn off specific LED
+ * 2: Always on specific LED
+ * 3: slow blinking specific LED
+ * 4: fast blinking specific LED
+ * 5: WPS led control is set. Led0 is Red, Led1 id Green
+ *
+ * Led[1] is parameter for WPS LED mode
+ * 1:InProgress
+ * 2: Error
+ * 3: Session overlap
+ * 4: Success control
+ */
+ u32 LED_LinkOn; /* Turn LED on control */
+ u32 LED_Scanning; /* Let LED in scan process control */
+ u32 LED_Blinking; /* Temp variable for shining */
+ u32 RxByteCountLast;
+ u32 TxByteCountLast;
+
+ atomic_t SurpriseRemoveCount;
+
+ /* For global timer */
+ u32 time_count; /* TICK_TIME_100ms 1 = 100ms */
+
+ /* For error recover */
+ u32 HwStop;
+
+ /* For avoid AP disconnect */
+ u32 NullPacketCount;
+};
+
+#endif
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
deleted file mode 100644
index 821a1b3..0000000
--- a/drivers/staging/winbond/wbhal_s.h
+++ /dev/null
@@ -1,525 +0,0 @@
-#ifndef __WINBOND_WBHAL_S_H
-#define __WINBOND_WBHAL_S_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h> /* for ETH_ALEN */
-
-#define HAL_LED_SET_MASK 0x001c
-#define HAL_LED_SET_SHIFT 2
-
-/* supported RF type */
-#define RF_MAXIM_2825 0
-#define RF_MAXIM_2827 1
-#define RF_MAXIM_2828 2
-#define RF_MAXIM_2829 3
-#define RF_MAXIM_V1 15
-#define RF_AIROHA_2230 16
-#define RF_AIROHA_7230 17
-#define RF_AIROHA_2230S 18
-#define RF_WB_242 33
-#define RF_WB_242_1 34
-#define RF_DECIDE_BY_INF 255
-
-/*
- * ----------------------------------------------------------------
- * The follow define connect to upper layer
- * User must modify for connection between HAL and upper layer
- * ----------------------------------------------------------------
- */
-
-/*
- * ==============================
- * Common define
- * ==============================
- */
-/* Bit 5 */
-#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20)
-
-/* Scan interval */
-#define SCAN_MAX_CHNL_TIME (50)
-
-/* For TxL2 Frame typr recognise */
-#define FRAME_TYPE_802_3_DATA 0
-#define FRAME_TYPE_802_11_MANAGEMENT 1
-#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
-#define FRAME_TYPE_802_11_CONTROL 3
-#define FRAME_TYPE_802_11_DATA 4
-#define FRAME_TYPE_PROMISCUOUS 5
-
-/* The follow definition is used for convert the frame------------ */
-#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */
-#define DOT_3_TYPE_OFFSET 12
-#define DOT_11_MAC_HEADER_SIZE 24
-#define DOT_11_SNAP_SIZE 6
-#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */
-#define DEFAULT_SIFSTIME 10
-#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
-#define DEFAULT_MSDU_LIFE_TIME 0xffff
-
-#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48)
-#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24)
-#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6)
-#define Tsym 4
-
-/* Frame Type of Bits (2, 3)----------------------------------- */
-#define MAC_TYPE_MANAGEMENT 0x00
-#define MAC_TYPE_CONTROL 0x04
-#define MAC_TYPE_DATA 0x08
-#define MASK_FRAGMENT_NUMBER 0x000F
-#define SEQUENCE_NUMBER_SHIFT 4
-
-#define HAL_WOL_TYPE_WAKEUP_FRAME 0x01
-#define HAL_WOL_TYPE_MAGIC_PACKET 0x02
-
-#define HAL_KEYTYPE_WEP40 0
-#define HAL_KEYTYPE_WEP104 1
-#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */
-#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */
-
-/* For VM state */
-enum {
- VM_STOP = 0,
- VM_RUNNING,
- VM_COMPLETED
-};
-
-/*
- * ================================
- * Normal Key table format
- * ================================
- */
-
-/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
-#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */
-#define GROUP_KEY_START_INDEX 4
-#define MAPPING_KEY_START_INDEX 8
-
-/*
- * =========================================
- * Descriptor
- * =========================================
- */
-#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */
-#define FLAG_ERROR_TX_MASK 0x000000bf
-#define FLAG_ERROR_RX_MASK 0x0000083f
-
-#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */
-
-struct R00_descriptor {
- union {
- u32 value;
-#ifdef _BIG_ENDIAN_
- struct {
- u32 R00_packet_or_buffer_status:1;
- u32 R00_packet_in_fifo:1;
- u32 R00_RESERVED:2;
- u32 R00_receive_byte_count:12;
- u32 R00_receive_time_index:16;
- };
-#else
- struct {
- u32 R00_receive_time_index:16;
- u32 R00_receive_byte_count:12;
- u32 R00_RESERVED:2;
- u32 R00_packet_in_fifo:1;
- u32 R00_packet_or_buffer_status:1;
- };
-#endif
- };
-};
-
-struct T00_descriptor {
- union {
- u32 value;
-#ifdef _BIG_ENDIAN_
- struct {
- u32 T00_first_mpdu:1; /* for hardware use */
- u32 T00_last_mpdu:1; /* for hardware use */
- u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
- u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
- u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */
- u32 T00_tx_packet_id:4;
- u32 T00_RESERVED:4;
- u32 T00_header_length:6;
- u32 T00_frame_length:12;
- };
-#else
- struct {
- u32 T00_frame_length:12;
- u32 T00_header_length:6;
- u32 T00_RESERVED:4;
- u32 T00_tx_packet_id:4;
- u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */
- u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
- u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
- u32 T00_last_mpdu:1; /* for hardware use */
- u32 T00_first_mpdu:1; /* for hardware use */
- };
-#endif
- };
-};
-
-struct R01_descriptor {
- union {
- u32 value;
-#ifdef _BIG_ENDIAN_
- struct {
- u32 R01_RESERVED:3;
- u32 R01_mod_type:1;
- u32 R01_pre_type:1;
- u32 R01_data_rate:3;
- u32 R01_AGC_state:8;
- u32 R01_LNA_state:2;
- u32 R01_decryption_method:2;
- u32 R01_mic_error:1;
- u32 R01_replay:1;
- u32 R01_broadcast_frame:1;
- u32 R01_multicast_frame:1;
- u32 R01_directed_frame:1;
- u32 R01_receive_frame_antenna_selection:1;
- u32 R01_frame_receive_during_atim_window:1;
- u32 R01_protocol_version_error:1;
- u32 R01_authentication_frame_icv_error:1;
- u32 R01_null_key_to_authentication_frame:1;
- u32 R01_icv_error:1;
- u32 R01_crc_error:1;
- };
-#else
- struct {
- u32 R01_crc_error:1;
- u32 R01_icv_error:1;
- u32 R01_null_key_to_authentication_frame:1;
- u32 R01_authentication_frame_icv_error:1;
- u32 R01_protocol_version_error:1;
- u32 R01_frame_receive_during_atim_window:1;
- u32 R01_receive_frame_antenna_selection:1;
- u32 R01_directed_frame:1;
- u32 R01_multicast_frame:1;
- u32 R01_broadcast_frame:1;
- u32 R01_replay:1;
- u32 R01_mic_error:1;
- u32 R01_decryption_method:2;
- u32 R01_LNA_state:2;
- u32 R01_AGC_state:8;
- u32 R01_data_rate:3;
- u32 R01_pre_type:1;
- u32 R01_mod_type:1;
- u32 R01_RESERVED:3;
- };
-#endif
- };
-};
-
-struct T01_descriptor {
- union {
- u32 value;
-#ifdef _BIG_ENDIAN_
- struct {
- u32 T01_rts_cts_duration:16;
- u32 T01_fall_back_rate:3;
- u32 T01_add_rts:1;
- u32 T01_add_cts:1;
- u32 T01_modulation_type:1;
- u32 T01_plcp_header_length:1;
- u32 T01_transmit_rate:3;
- u32 T01_wep_id:2;
- u32 T01_add_challenge_text:1;
- u32 T01_inhibit_crc:1;
- u32 T01_loop_back_wep_mode:1;
- u32 T01_retry_abort_ebable:1;
- };
-#else
- struct {
- u32 T01_retry_abort_ebable:1;
- u32 T01_loop_back_wep_mode:1;
- u32 T01_inhibit_crc:1;
- u32 T01_add_challenge_text:1;
- u32 T01_wep_id:2;
- u32 T01_transmit_rate:3;
- u32 T01_plcp_header_length:1;
- u32 T01_modulation_type:1;
- u32 T01_add_cts:1;
- u32 T01_add_rts:1;
- u32 T01_fall_back_rate:3;
- u32 T01_rts_cts_duration:16;
- };
-#endif
- };
-};
-
-struct T02_descriptor {
- union {
- u32 value;
-#ifdef _BIG_ENDIAN_
- struct {
- u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
- u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
- u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
- u32 T02_Tx_PktID:4;
- u32 T02_MPDU_Cnt:4;
- u32 T02_RTS_Cnt:4;
- u32 T02_RESERVED:7;
- u32 T02_transmit_complete:1;
- u32 T02_transmit_abort_due_to_TBTT:1;
- u32 T02_effective_transmission_rate:1;
- u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
- u32 T02_discard_due_to_null_wep_key:1;
- u32 T02_RESERVED_1:1;
- u32 T02_out_of_MaxTxMSDULiftTime:1;
- u32 T02_transmit_abort:1;
- u32 T02_transmit_fail:1;
- };
-#else
- struct {
- u32 T02_transmit_fail:1;
- u32 T02_transmit_abort:1;
- u32 T02_out_of_MaxTxMSDULiftTime:1;
- u32 T02_RESERVED_1:1;
- u32 T02_discard_due_to_null_wep_key:1;
- u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
- u32 T02_effective_transmission_rate:1;
- u32 T02_transmit_abort_due_to_TBTT:1;
- u32 T02_transmit_complete:1;
- u32 T02_RESERVED:7;
- u32 T02_RTS_Cnt:4;
- u32 T02_MPDU_Cnt:4;
- u32 T02_Tx_PktID:4;
- u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
- u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
- u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
- };
-#endif
- };
-};
-
-struct wb35_descriptor { /* Skip length = 8 DWORD */
- /* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
- u8 Descriptor_ID;
- /* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
- u8 RESERVED[3];
-
- u16 FragmentThreshold;
- u8 InternalUsed; /* Only can be used by operation of descriptor definition */
- u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
-
- u8 PreambleMode;/* 0: short 1:long */
- u8 TxRate;
- u8 FragmentCount;
- u8 EapFix; /* For speed up key install */
-
- /* For R00 and T00 ------------------------------ */
- union {
- struct R00_descriptor R00;
- struct T00_descriptor T00;
- };
-
- /* For R01 and T01 ------------------------------ */
- union {
- struct R01_descriptor R01;
- struct T01_descriptor T01;
- };
-
- /* For R02 and T02 ------------------------------ */
- union {
- u32 R02;
- struct T02_descriptor T02;
- };
-
- /* For R03 and T03 ------------------------------ */
- /* For software used */
- union {
- u32 R03;
- u32 T03;
- struct {
- u8 buffer_number;
- u8 buffer_start_index;
- u16 buffer_total_size;
- };
- };
-
- /* For storing the buffer */
- u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
- void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
-};
-
-
-#define DEFAULT_NULL_PACKET_COUNT 180000 /* 180 seconds */
-
-#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */
-#define MAX_RF_PARAMETER 32
-
-struct txvga_for_50 {
- u8 ChanNo;
- u8 TxVgaValue;
-};
-
-/*
- * ==============================================
- * Device related include
- * ==============================================
- */
-
-#include "wbusb_s.h"
-#include "wb35reg_s.h"
-#include "wb35tx_s.h"
-#include "wb35rx_s.h"
-
-/* For Hal using ============================================ */
-struct hw_data {
- /* For compatible with 33 */
- u32 revision;
- u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */
- u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */
-
- /* For surprise remove */
- u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */
- u8 IsKeyPreSet;
- u8 CalOneTime;
-
- u8 VCO_trim;
-
- u32 FragCount;
- u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
-
- /*
- * ===============================================
- * Definition for MAC address
- * ===============================================
- */
- u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
- u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
-
- /*
- * =========================================
- * Definition for 802.11
- * =========================================
- */
- u8 *bssid_pointer; /* Used by hal_get_bssid for return value */
- u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
- u8 ssid[32]; /* maximum ssid length is 32 byte */
-
- u16 AID;
- u8 ssid_length;
- u8 Channel;
-
- u16 ListenInterval;
- u16 CapabilityInformation;
-
- u16 BeaconPeriod;
- u16 ProbeDelay;
-
- u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */
- u8 preamble;/* 0: short preamble, 1: long preamble */
- u8 slot_time_select; /* 9 or 20 value */
- u8 phy_type; /* Phy select */
-
- u32 phy_para[MAX_RF_PARAMETER];
- u32 phy_number;
-
- u32 CurrentRadioSw; /* 0:On 1:Off */
- u32 CurrentRadioHw; /* 0:On 1:Off */
-
- u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */
- u8 cwmin;
- u8 desired_power_save;
- u8 dtim; /* Is running dtim */
- u8 mapping_key_replace_index; /* In Key table, the next index be replaced */
-
- u16 MaxReceiveLifeTime;
- u16 FragmentThreshold;
- u16 FragmentThreshold_tmp;
- u16 cwmax;
-
- u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
- u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
- u8 CurrentDefaultKeyIndex;
- u32 CurrentDefaultKeyLength;
-
- /*
- * ==================================================
- * Variable for each module
- * ==================================================
- */
- struct wb_usb WbUsb; /* Need WbUsb.h */
- struct wb35_reg reg; /* Need Wb35Reg.h */
- struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */
- struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */
-
- struct timer_list LEDTimer; /* For LED */
-
- u32 LEDpoint; /* For LED */
-
- u32 dto_tx_retry_count;
- u32 dto_tx_frag_count;
- u32 rx_ok_count[13]; /* index=0: total rx ok */
- u32 rx_err_count[13]; /* index=0: total rx err */
-
- /* for Tx debug */
- u32 tx_TBTT_start_count;
- u32 tx_ETR_count;
- u32 tx_WepOn_false_count;
- u32 tx_Null_key_count;
- u32 tx_retry_count[8];
-
- u8 PowerIndexFromEEPROM; /* For 2412MHz */
- u8 power_index;
- u8 IsWaitJoinComplete; /* TRUE: set join request */
- u8 band;
-
- u16 SoftwareSet;
- u16 Reserved_s;
-
- u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */
-
- /* For Phy calibration */
- s32 iq_rsdl_gain_tx_d2;
- s32 iq_rsdl_phase_tx_d2;
- u32 txvga_setting_for_cal;
-
- u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
- u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */
- struct txvga_for_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
-
- u16 Scan_Interval;
- u16 RESERVED6;
-
- /* LED control */
- u32 LED_control;
- /*
- * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
- * Gray_Led
- * For Led gray setting
- * Led
- * 0: normal control,
- * LED behavior will decide by EEPROM setting
- * 1: Turn off specific LED
- * 2: Always on specific LED
- * 3: slow blinking specific LED
- * 4: fast blinking specific LED
- * 5: WPS led control is set. Led0 is Red, Led1 id Green
- *
- * Led[1] is parameter for WPS LED mode
- * 1:InProgress
- * 2: Error
- * 3: Session overlap
- * 4: Success control
- */
- u32 LED_LinkOn; /* Turn LED on control */
- u32 LED_Scanning; /* Let LED in scan process control */
- u32 LED_Blinking; /* Temp variable for shining */
- u32 RxByteCountLast;
- u32 TxByteCountLast;
-
- atomic_t SurpriseRemoveCount;
-
- /* For global timer */
- u32 time_count; /* TICK_TIME_100ms 1 = 100ms */
-
- /* For error recover */
- u32 HwStop;
-
- /* For avoid AP disconnect */
- u32 NullPacketCount;
-};
-
-#endif
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index a053bbb..df055ab 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -16,7 +16,7 @@
#include "mds_f.h"
#include "mlmetxrx_f.h"
#include "mto.h"
-#include "wbhal_s.h"
+#include "wbhal.h"
#include "wb35reg_f.h"
#include "wb35tx_f.h"
#include "wb35rx_f.h"
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists