lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <87d3pe6cai.fsf@gerlin1.hsp-law.de>
Date:	Mon, 06 Dec 2010 18:28:37 +0100
From:	Ralf Gerbig <rge@...ngel.org>
To:	James Bottomley <James.Bottomley@...e.de>
Cc:	LKML <linux-kernel@...r.kernel.org>,
	"Martin K. Petersen" <martin.petersen@...cle.com>,
	FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
	linux-scsi <linux-scsi@...r.kernel.org>
Subject: Re: 2.6.36 Crash/Panik in scsi_eh

Hi Everyone,

* James Bottomley writes:

> On Tue, 2010-11-02 at 18:11 +0100, Ralf Gerbig wrote:
>> >> Nov  2 10:40:57 gerlin1 kernel: [45977.560407] RIP: 0010:[<ffffffff811d2290>]  [<ffffffff811d2290>] scsi_dispatch_cmd+0x92/0x22e
>> 
>> > This is the faulting location ... could you run addr2line on this
>> > address to map it to a line of source code?
>> 
>> addr2line id only say ??:0
>> 
>> I recompiled vmlinux with debugging symbols, and gdb says:
>> 
>> Reading symbols from /usr/src/linux-git/linux-2.6/vmlinux...done.
>> (gdb) l *(scsi_dispatch_cmd + 0x92)
>> 0xffffffff811d2290 is in scsi_dispatch_cmd (drivers/scsi/scsi.c:707).
>> 702              * We will wait MIN_RESET_DELAY clock ticks after the
>> last reset so
>> 703              * we can avoid the drive not being ready.
>> 704              */
>> 705             timeout = host->last_reset + MIN_RESET_DELAY;
>> 706
>> 707             if (host->resetting && time_before(jiffies, timeout)) {
>> 708                     int ticks_remaining = timeout - jiffies;
>> 709                     /*
>> 710                      * NOTE: This may be executed from within an interrupt
>> 711                      * handler!  This is bad, but for now, it'll do. The irq

> Um, that's bad.  It's saying the junk pointer is host on line 707 but
> when it was dereferenced on line 705 it was fine.  This is most likely
> to indicate either memory corruption (another thread overwrote the host
> location or even a hardware fault).


just to wrap this up: you where right, the commits between
2.6.36-rc8-00045-g51ea8a8 and 2.6.36 where not at fault, as
the former also crashed after 11 days.

Without any bright, or even dim, ideas I changed -Os to -O2

 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

and 2.6.36 runs without problems since Nov. 14th.

Thanks for caring,

Ralf
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ