| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1291659120.17494.179.camel@Joe-Laptop>
Date: Mon, 06 Dec 2010 10:12:00 -0800
From: Joe Perches <joe@...ches.com>
To: Matt Mackall <mpm@...enic.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
David Woodhouse <dwmw2@...radead.org>,
linux-embedded@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/7] printk: add pr_<level>_once, guard print_hex_dump
On Mon, 2010-12-06 at 09:37 -0600, Matt Mackall wrote:
> On Sun, 2010-12-05 at 21:44 -0800, Joe Perches wrote:
> > There are many uses of printk_once(KERN_<level>.
> > Add pr_<level>_once macros to avoid printk_once(KERN_<level> pr_fmt(fmt).
> > Add an #ifdef CONFIG_PRINTK for print_hex_dump and static inline void
> > functions for the #else cases to reduce embedded code size.
> > Neaten and organize the rest of the code.
> Looks fine to me. I'd missed the introduction of the pr_<level> macros
> and I'm not sure if I like the idea, but this is a tidy and
> well-presented cleanup and extension.
> Acked-by: Matt Mackall <mpm@...enic.com>
The #ifdef CONFIG_PRINTK guard for print_hex_dump saves ~200
bytes in an x86 !CONFIG_PRINTK
There could be ~500 bytes more saved if hex_dump_to_buffer
was compiled out.
It's a more invasive change, so I didn't want to submit it
just now, but it could be something like below.
It requires the modules that use hex_dump_to_buffer, there
aren't many, to Kconfig select HEX_DUMP_TO_BUFFER so it's
not very pretty nor simple.
Thoughts?
---
drivers/isdn/hardware/mISDN/Kconfig | 2 +-
drivers/media/video/hdpvr/Kconfig | 1 +
drivers/mfd/Kconfig | 1 +
drivers/net/wireless/iwlwifi/Kconfig | 1 +
drivers/scsi/osd/Kconfig | 1 +
include/linux/printk.h | 14 ++++++++++++++
init/Kconfig | 7 +++++++
lib/Kconfig | 4 ++++
lib/Kconfig.debug | 1 +
lib/hexdump.c | 2 ++
10 files changed, 33 insertions(+), 1 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index eadc1cd..243eadf 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -90,4 +90,4 @@ config MISDN_IPAC
config MISDN_ISAR
tristate
depends on MISDN
-
+ select HEX_DUMP_TO_BUFFER
diff --git a/drivers/media/video/hdpvr/Kconfig b/drivers/media/video/hdpvr/Kconfig
index de247f3..851a45f 100644
--- a/drivers/media/video/hdpvr/Kconfig
+++ b/drivers/media/video/hdpvr/Kconfig
@@ -2,6 +2,7 @@
config VIDEO_HDPVR
tristate "Hauppauge HD PVR support"
depends on VIDEO_DEV
+ select HEX_DUMP_TO_BUFFER
---help---
This is a video4linux driver for Hauppauge's HD PVR USB device.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3a7b891..982b27a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -418,6 +418,7 @@ config MFD_WM8994
config MFD_PCF50633
tristate "Support for NXP PCF50633"
depends on I2C
+ select HEX_DUMP_TO_BUFFER
help
Say yes here if you have NXP PCF50633 chip on your board.
This core driver provides register access and IRQ handling
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index ed42457..4074fa0 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -2,6 +2,7 @@ config IWLWIFI
tristate "Intel Wireless Wifi"
depends on PCI && MAC80211
select FW_LOADER
+ select HEX_DUMP_TO_BUFFER
menu "Debugging Options"
depends on IWLWIFI
diff --git a/drivers/scsi/osd/Kconfig b/drivers/scsi/osd/Kconfig
index 861b5ce..c43df39 100644
--- a/drivers/scsi/osd/Kconfig
+++ b/drivers/scsi/osd/Kconfig
@@ -18,6 +18,7 @@
config SCSI_OSD_INITIATOR
tristate "OSD-Initiator library"
depends on SCSI
+ select HEX_DUMP_TO_BUFFER
help
Enable the OSD-Initiator library (libosd.ko).
NOTE: You must also select CRYPTO_SHA1 + CRYPTO_HMAC and their
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 41388e3..38d918d 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -276,9 +276,23 @@ enum {
DUMP_PREFIX_ADDRESS,
DUMP_PREFIX_OFFSET
};
+
+#ifdef CONFIG_HEX_DUMP_TO_BUFFER
extern void hex_dump_to_buffer(const void *buf, size_t len,
int rowsize, int groupsize,
char *linebuf, size_t linebuflen, bool ascii);
+#else
+static inline
+void hex_dump_to_buffer(const void *buf, size_t len,
+ int rowsize, int groupsize,
+ char *linebuf, size_t linebuflen, bool ascii)
+{
+#ifndef CONFIG_EMBEDDED
+#error "Kconfig must select CONFIG_HEX_DUMP_TO_BUFFER"
+#endif
+}
+#endif
+
#ifdef CONFIG_PRINTK
extern void print_hex_dump(const char *level, const char *prefix_str,
int prefix_type, int rowsize, int groupsize,
diff --git a/init/Kconfig b/init/Kconfig
index 3eb22ad..5ab5ad8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -950,6 +950,13 @@ config PRINTK
very difficult to diagnose system problems, saying N here is
strongly discouraged.
+config HEX_DUMP_TO_BUFFER
+ default y
+ bool "Enable support for hexdump" if EMBEDDED
+ help
+ This option enables normal hex_dump support.
+ Saying N here is strongly discouraged.
+
config BUG
bool "BUG() support" if EMBEDDED
default y
diff --git a/lib/Kconfig b/lib/Kconfig
index 3d498b2..2c95d1c 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -5,6 +5,10 @@
config BINARY_PRINTF
def_bool n
+config HEX_DUMP_TO_BUFFER
+ bool
+ default n
+
menu "Library routines"
config RAID6_PQ
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 968d183..e3b0238 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -380,6 +380,7 @@ config DEBUG_KMEMLEAK
select STACKTRACE if STACKTRACE_SUPPORT
select KALLSYMS
select CRC32
+ select HEX_DUMP_TO_BUFFER
help
Say Y here if you want to enable the memory leak
detector. The memory allocation/freeing is traced in a way
diff --git a/lib/hexdump.c b/lib/hexdump.c
index f5fe6ba..88d70f4 100644
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -49,6 +49,7 @@ void hex2bin(u8 *dst, const char *src, size_t count)
}
EXPORT_SYMBOL(hex2bin);
+#ifdef CONFIG_HEX_DUMP_TO_BUFFER
/**
* hex_dump_to_buffer - convert a blob of data to "hex ASCII" in memory
* @buf: data blob to dump
@@ -153,6 +154,7 @@ nil:
linebuf[lx++] = '\0';
}
EXPORT_SYMBOL(hex_dump_to_buffer);
+#endif
#ifdef CONFIG_PRINTK
/**
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists