| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1291717247-10280-1-git-send-email-mattias.wallin@stericsson.com>
Date: Tue, 7 Dec 2010 11:20:47 +0100
From: Mattias Wallin <mattias.wallin@...ricsson.com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: <linux-kernel@...r.kernel.org>,
Linus Walleij <linus.walleij@...ricsson.com>,
Mattias Wallin <mattias.wallin@...ricsson.com>
Subject: [PATCH] MFD: ab8500-core chip version cut 2.0 support
This patch adds support for chip version 2.0 or cut 2.0.
One new interrupt latch register - latch 12 - is introduced.
Signed-off-by: Mattias Wallin <mattias.wallin@...ricsson.com>
Acked-by: Linus Walleij <linus.walleij@...ricsson.com>
---
drivers/mfd/ab8500-core.c | 36 ++++++++++++++++++++---------
include/linux/mfd/ab8500.h | 53 ++++++++++++++++++++++++-------------------
2 files changed, 55 insertions(+), 34 deletions(-)
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 7f01a3a..39c762a 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -52,6 +52,7 @@
#define AB8500_IT_LATCH8_REG 0x27
#define AB8500_IT_LATCH9_REG 0x28
#define AB8500_IT_LATCH10_REG 0x29
+#define AB8500_IT_LATCH12_REG 0x2B
#define AB8500_IT_LATCH19_REG 0x32
#define AB8500_IT_LATCH20_REG 0x33
#define AB8500_IT_LATCH21_REG 0x34
@@ -98,7 +99,7 @@
* offset 0.
*/
static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
- 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
+ 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21,
};
static int ab8500_get_chip_id(struct device *dev)
@@ -252,6 +253,10 @@ static void ab8500_irq_sync_unlock(unsigned int irq)
if (new == old)
continue;
+ /* Interrupt register 12 does'nt exist prior to version 0x20 */
+ if (ab8500_irq_regoffset[i] == 11 && ab8500->chip_id < 0x20)
+ continue;
+
ab8500->oldmask[i] = new;
reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
@@ -301,6 +306,10 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
int status;
u8 value;
+ /* Interrupt register 12 does'nt exist prior to version 0x20 */
+ if (regoffset == 11 && ab8500->chip_id < 0x20)
+ continue;
+
status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
AB8500_IT_LATCH1_REG + regoffset, &value);
if (status < 0 || value == 0)
@@ -554,6 +563,12 @@ static struct resource ab8500_usb_resources[] = {
.end = AB8500_INT_VBUS_DET_R,
.flags = IORESOURCE_IRQ,
},
+ {
+ .name = "USB_LINK_STATUS",
+ .start = AB8500_INT_USB_LINK_STATUS,
+ .end = AB8500_INT_USB_LINK_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct resource ab8500_temp_resources[] = {
@@ -670,8 +685,9 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
* 0x0 - Early Drop
* 0x10 - Cut 1.0
* 0x11 - Cut 1.1
+ * 0x20 - Cut 2.0
*/
- if (value == 0x0 || value == 0x10 || value == 0x11) {
+ if (value == 0x0 || value == 0x10 || value == 0x11 || value == 0x20) {
ab8500->revision = value;
dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
} else {
@@ -684,18 +700,16 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
plat->init(ab8500);
/* Clear and mask all interrupts */
- for (i = 0; i < 10; i++) {
- get_register_interruptible(ab8500, AB8500_INTERRUPT,
- AB8500_IT_LATCH1_REG + i, &value);
- set_register_interruptible(ab8500, AB8500_INTERRUPT,
- AB8500_IT_MASK1_REG + i, 0xff);
- }
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+ /* Interrupt register 12 does'nt exist prior to version 0x20 */
+ if (ab8500_irq_regoffset[i] == 11 && ab8500->chip_id < 0x20)
+ continue;
- for (i = 18; i < 24; i++) {
get_register_interruptible(ab8500, AB8500_INTERRUPT,
- AB8500_IT_LATCH1_REG + i, &value);
+ AB8500_IT_LATCH1_REG + ab8500_irq_regoffset[i],
+ &value);
set_register_interruptible(ab8500, AB8500_INTERRUPT,
- AB8500_IT_MASK1_REG + i, 0xff);
+ AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i], 0xff);
}
ret = abx500_register_ops(ab8500->dev, &ab8500_ops);
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index 1848781..157f000 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -74,30 +74,37 @@
#define AB8500_INT_ACC_DETECT_21DB_F 37
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
-#define AB8500_INT_BTEMP_LOW 72
-#define AB8500_INT_BTEMP_LOW_MEDIUM 73
-#define AB8500_INT_BTEMP_MEDIUM_HIGH 74
-#define AB8500_INT_BTEMP_HIGH 75
-#define AB8500_INT_USB_CHARGER_NOT_OK 81
-#define AB8500_INT_ID_WAKEUP_R 82
-#define AB8500_INT_ID_DET_R1R 84
-#define AB8500_INT_ID_DET_R2R 85
-#define AB8500_INT_ID_DET_R3R 86
-#define AB8500_INT_ID_DET_R4R 87
-#define AB8500_INT_ID_WAKEUP_F 88
-#define AB8500_INT_ID_DET_R1F 90
-#define AB8500_INT_ID_DET_R2F 91
-#define AB8500_INT_ID_DET_R3F 92
-#define AB8500_INT_ID_DET_R4F 93
-#define AB8500_INT_USB_CHG_DET_DONE 94
-#define AB8500_INT_USB_CH_TH_PROT_F 96
-#define AB8500_INT_USB_CH_TH_PROT_R 97
-#define AB8500_INT_MAIN_CH_TH_PROT_F 98
-#define AB8500_INT_MAIN_CH_TH_PROT_R 99
-#define AB8500_INT_USB_CHARGER_NOT_OKF 103
+#define AB8500_INT_ADP_SOURCE_ERROR 72
+#define AB8500_INT_ADP_SINK_ERROR 73
+#define AB8500_INT_ADP_PROBE_PLUG 74
+#define AB8500_INT_ADP_PROBE_UNPLUG 75
+#define AB8500_INT_ADP_SENSE_OFF 76
+#define AB8500_INT_USB_PHY_POWER_ERR 78
+#define AB8500_INT_USB_LINK_STATUS 79
+#define AB8500_INT_BTEMP_LOW 80
+#define AB8500_INT_BTEMP_LOW_MEDIUM 81
+#define AB8500_INT_BTEMP_MEDIUM_HIGH 82
+#define AB8500_INT_BTEMP_HIGH 83
+#define AB8500_INT_USB_CHARGER_NOT_OK 89
+#define AB8500_INT_ID_WAKEUP_R 90
+#define AB8500_INT_ID_DET_R1R 92
+#define AB8500_INT_ID_DET_R2R 93
+#define AB8500_INT_ID_DET_R3R 94
+#define AB8500_INT_ID_DET_R4R 95
+#define AB8500_INT_ID_WAKEUP_F 96
+#define AB8500_INT_ID_DET_R1F 98
+#define AB8500_INT_ID_DET_R2F 99
+#define AB8500_INT_ID_DET_R3F 100
+#define AB8500_INT_ID_DET_R4F 101
+#define AB8500_INT_USB_CHG_DET_DONE 102
+#define AB8500_INT_USB_CH_TH_PROT_F 104
+#define AB8500_INT_USB_CH_TH_PROT_R 105
+#define AB8500_INT_MAIN_CH_TH_PROT_F 106
+#define AB8500_INT_MAIN_CH_TH_PROT_R 107
+#define AB8500_INT_USB_CHARGER_NOT_OKF 111
-#define AB8500_NR_IRQS 104
-#define AB8500_NUM_IRQ_REGS 13
+#define AB8500_NR_IRQS 112
+#define AB8500_NUM_IRQ_REGS 14
#define AB8500_NUM_REGULATORS 15
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists