linux-kernel - Re: Posted Write onto a PCI end point device using Linux

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <241570.15232.qm@web31708.mail.mud.yahoo.com>
Date:	Tue, 7 Dec 2010 22:05:40 -0800 (PST)
From:	Sanka Piyaratna <cesanka@...oo.com>
To:	Robert Hancock <hancockrwd@...il.com>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: Posted Write onto a PCI end point device using Linux

Thanks for that Robert. When you say DMA, this has to be implemented at the 
endpoint device doesn't it? There is no DMA mode on the CPU for doing this is 
there?

 Sanka Piyaratna




________________________________
From: Robert Hancock <hancockrwd@...il.com>
To: Sanka Piyaratna <cesanka@...oo.com>
Cc: linux-kernel@...r.kernel.org
Sent: Wed, 8 December, 2010 3:25:47 PM
Subject: Re: Posted Write onto a PCI end point device using Linux

On Tue, Dec 7, 2010 at 9:57 PM, Sanka Piyaratna <cesanka@...oo.com> wrote:
> Hi Robert,
> Could you please tell me how I can initiate a posted write towards a PCIe
> endpoint with larger than 32 bit payload using Linux?
> Thanks and regards,

You can try writeq to get a 64-bit payload, but I don't think it's
available on all platforms. In particular with a 32-bit CPU, it may
not be possible at all. If you need to send bigger payloads then you
need to use DMA.

>
> Sanka Piyaratna
>
> ________________________________
> From: Robert Hancock <hancockrwd@...il.com>
> To: Sanka Piyaratna <cesanka@...oo.com>
> Cc: linux-kernel@...r.kernel.org
> Sent: Wed, 8 December, 2010 12:16:54 PM
> Subject: Re: Posted Write onto a PCI end point device using Linux
>
> On 12/07/2010 05:29 AM, Sanka Piyaratna wrote:
>> Hi,
>>
>>
>> I am wondering whether it is possible to issue a posted write using the
>> host
>> computer's root complex towards an PCI express end point. I have done this
>> using
>>
>> DMA in the past. However, if posted writes are possible that would save a
>> lot of
>>
>> time and effort and would be quicker too.
>
> Writes from the CPU to PCI memory are always posted. However, the posted
> write buffer size is usually quite limited and so this probably will
> still cause CPU overhead when writing any significant amount of data
> this way.
>
>



      
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/