| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5D8008F58939784290FAB48F549751983263F995EC@shsmsx502.ccr.corp.intel.com>
Date: Thu, 9 Dec 2010 14:10:53 +0800
From: "Dong, Chuanxiao" <chuanxiao.dong@...el.com>
To: Kyungmin Park <kmpark@...radead.org>
CC: "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"cjb@...top.org" <cjb@...top.org>,
"arjan@...ux.intel.com" <arjan@...ux.intel.com>,
"alan@...ux.intel.com" <alan@...ux.intel.com>,
"akpm@...ux-foundation.org" <akpm@...ux-foundation.org>
Subject: RE: [PATCH v4 1/4]enable HW reset capbility
> -----Original Message-----
> From: kyungmin78@...il.com [mailto:kyungmin78@...il.com] On Behalf Of
> Kyungmin Park
> Sent: Thursday, December 09, 2010 2:05 PM
> To: Dong, Chuanxiao
> Cc: linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org; cjb@...top.org;
> arjan@...ux.intel.com; alan@...ux.intel.com; akpm@...ux-foundation.org
> Subject: Re: [PATCH v4 1/4]enable HW reset capbility
>
> On Thu, Dec 9, 2010 at 2:40 PM, Dong, Chuanxiao
> <chuanxiao.dong@...el.com> wrote:
> >
> >
> >> -----Original Message-----
> >> From: kyungmin78@...il.com [mailto:kyungmin78@...il.com] On Behalf Of
> >> Kyungmin Park
> >> Sent: Thursday, December 09, 2010 1:24 PM
> >> To: Dong, Chuanxiao
> >> Cc: linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org; cjb@...top.org;
> >> arjan@...ux.intel.com; alan@...ux.intel.com; akpm@...ux-foundation.org
> >> Subject: Re: [PATCH v4 1/4]enable HW reset capbility
> >>
> >> On Wed, Dec 1, 2010 at 9:49 PM, Chuanxiao Dong <chuanxiao.dong@...el.com>
> >> wrote:
> >> > From d3be0b4fe8e8a40294830dfd8d0543d1e957fd29 Mon Sep 17 00:00:00
> 2001
> >> > From: Chuanxiao Dong <chuanxiao.dong@...el.com>
> >> > Date: Wed, 1 Dec 2010 19:14:02 +0800
> >> > Subject: [PATCH 1/4] enable HW reset caps of MMC card if card supports
> >> >
> >> > HW reset capbility enable bit is byte 162 in card EXT_CSD
> >> > register, only version4.4 card or later can support to enable
> >> > this feature.
> >> >
> >> > HW reset feature can be used to reset eMMC card when occures
> >> > timeout errors during read/write/erase.
> >> >
> >> > Signed-off-by: Chuanxiao Dong <chuanxiao.dong@...el.com>
> >> > ---
> >> > drivers/mmc/core/mmc.c | 29 +++++++++++++++++++++++++++++
> >> > include/linux/mmc/card.h | 1 +
> >> > include/linux/mmc/mmc.h | 1 +
> >> > 3 files changed, 31 insertions(+), 0 deletions(-)
> >> >
> >> > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> >> > index 77f93c3..85cc7f6 100644
> >> > --- a/drivers/mmc/core/mmc.c
> >> > +++ b/drivers/mmc/core/mmc.c
> >> > @@ -310,6 +310,10 @@ static int mmc_read_ext_csd(struct mmc_card
> *card)
> >> > ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
> >> > card->ext_csd.trim_timeout = 300 *
> >> > ext_csd[EXT_CSD_TRIM_MULT];
> >> > + /*
> >> > + * check Hardware reset cap
> >> Check hardware.
> >> > + */
> >> > + card->ext_csd.rst = ext_csd[EXT_CSD_RST];
> >> > }
> >> >
> >> > if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
> >> > @@ -484,6 +488,31 @@ static int mmc_init_card(struct mmc_host *host,
> u32
> >> ocr,
> >> > }
> >> >
> >> > /*
> >> > + * eMMC4.4 version card has HW reset capbility.
> >> capability.
> >> > + * Enable this feature here:
> >> > + * RST_N_FUNCTION register is W/R, one time programmable
> >> Use RST_n_FUNCTION as spec.
> >> > + * or readable.
> >> > + * So need to enable this register only once after power on
> >> > + */
> >> > + if (card->csd.mmca_vsn >= CSD_SPEC_VER_4 &&
> >> > + card->ext_csd.rev >= 4 &&
> >> it should be card->ext_csd.rev >= 5 since 4 is obsolete.
> >>
> >> Thank you,
> >> Kyungmin Park
> >
> > Thanks, Park. I will fix this.
> > And by the way, I noticed mmc_read_ext_csd function also used
> card->ext_csd.rev >=4. Is there some other reason for this kind of using? Or it is
> just because at that time the value 4 has not be obsolete yet....?
>
> Maybe need to fix it also.
>
> And remaining patches also need to fix 'capability' typo.
Thanks. Will pay more attention on this. And will resubmit new version for review. Thanks
> >> > + card->ext_csd.rst == 0) {
> >> > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> >> > + EXT_CSD_RST, 1);
> >> > +
> >> > + if (err && err != -EBADMSG)
> >> > + goto free_card;
> >> > +
> >> > + if (err) {
> >> > + printk(KERN_WARNING "%s: switch to rst
> enable
> >> "
> >> > + "failed %d\n",
> >> > + mmc_hostname(card->host),
> err);
> >> > + err = 0;
> >> > + } else
> >> > + card->ext_csd.rst = 1;
> >> > + }
> >> > +
> >> > + /*
> >> > * Activate high speed (if supported)
> >> > */
> >> > if ((card->ext_csd.hs_max_dtr != 0) &&
> >> > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> >> > index 8ce0827..ebee676 100644
> >> > --- a/include/linux/mmc/card.h
> >> > +++ b/include/linux/mmc/card.h
> >> > @@ -54,6 +54,7 @@ struct mmc_ext_csd {
> >> > unsigned int sec_trim_mult; /* Secure trim
> >> multiplier */
> >> > unsigned int sec_erase_mult; /* Secure erase
> multiplier
> >> */
> >> > unsigned int trim_timeout; /* In
> >> milliseconds */
> >> > + unsigned int rst; /* hardware reset enable bit */
> >> > };
> >> >
> >> > struct sd_scr {
> >> > diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> >> > index 956fbd8..b7ab0da 100644
> >> > --- a/include/linux/mmc/mmc.h
> >> > +++ b/include/linux/mmc/mmc.h
> >> > @@ -251,6 +251,7 @@ struct _mmc_csd {
> >> > * EXT_CSD fields
> >> > */
> >> >
> >> > +#define EXT_CSD_RST 162 /* onetime programmable
> R/W
> >> */
> >> > #define EXT_CSD_ERASE_GROUP_DEF 175 /*
> R/W */
> >> > #define EXT_CSD_ERASED_MEM_CONT 181 /*
> RO */
> >> > #define EXT_CSD_BUS_WIDTH 183 /* R/W */
> >> > --
> >> > 1.6.6.1
> >> >
> >> > --
> >> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> >> > the body of a message to majordomo@...r.kernel.org
> >> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists