lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <01e201cb9785$4a6a34f0$df3e9ed0$@mprc.pku.edu.cn>
Date:	Thu, 9 Dec 2010 17:41:44 +0800
From:	"Guan Xuetao" <guanxuetao@...c.pku.edu.cn>
To:	"Arnd Bergmann" <arnd@...db.de>
Cc:	<linux-arch@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCHv1 012/211] unicore32: new file arch/unicore32/configs/nb0916_defconfig

From: Guan Xuetao <guanxuetao@...c.pku.edu.cn>

	default config file for netbook with uc32 isa and puv3 drivers

Signed-off-by: Guan Xuetao <guanxuetao@...c.pku.edu.cn>
---
 arch/unicore32/configs/nb0916_defconfig |  203
+++++++++++++++++++++++++++++++
 1 files changed, 203 insertions(+), 0 deletions(-)

diff --git a/arch/unicore32/configs/nb0916_defconfig
b/arch/unicore32/configs/nb0916_defconfig
new file mode 100644
index 0000000..9645b74
--- /dev/null
+++ b/arch/unicore32/configs/nb0916_defconfig
@@ -0,0 +1,203 @@
+### General setup
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-nb0916"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HOTPLUG=y
+#	Initial RAM filesystem and RAM disk (initramfs/initrd) support
+#CONFIG_BLK_DEV_INITRD=y
+#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
+
+### Enable loadable module support
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+
+### System Type
+CONFIG_ARCH_PUV3=y
+#	Board Selection
+CONFIG_PUV3_NB0916=y
+#	Processor Features
+CONFIG_CPU_DCACHE_LINE_DISABLE=y
+CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
+
+### Bus support
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY=n
+
+### Boot options
+#	for debug, adding: earlyprintk=ocd,keep initcall_debug
+#	others support: test_suspend=mem root=/dev/sda
+#	hibernate support: resume=/dev/sda3
+CONFIG_CMDLINE="mem=512M ignore_loglevel video=unifb:1024x600-16@75
root=/dev/nfs rw nfsroot=/home/nfs/uc3,rsize=1024,wsize=1024
ip=192.168.10.83:192.168.10.82:192.168.10.1:255.255.255.0::eth0:off"
+# CONFIG_CMDLINE_FORCE is not set
+
+### Power management options
+CONFIG_PM=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/sda3"
+CONFIG_CPU_FREQ=n
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+
+### Networking support
+CONFIG_NET=y
+#	Networking options
+CONFIG_PACKET=m
+CONFIG_UNIX=m
+#	TCP/IP networking
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IPV6=n
+#	Wireless
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+### PKUnity SoC Features
+CONFIG_USB_WLAN_HED_AQ3=n
+CONFIG_USB_CMMB_INNOFIDEI=n
+CONFIG_I2C_BATTERY_BQ27200=m
+CONFIG_I2C_EEPROM_AT24=m
+CONFIG_LCD_BACKLIGHT=m
+
+CONFIG_PUV3_RTC=m
+CONFIG_PUV3_UMAL=m
+CONFIG_PUV3_UNIGFX=y
+CONFIG_PUV3_MUSB=n
+CONFIG_PUV3_AC97=n
+CONFIG_PUV3_NAND=n
+CONFIG_PUV3_MMC=n
+CONFIG_PUV3_UART=n
+
+### Device Drivers
+#	Memory Technology Device (MTD) support
+CONFIG_MTD=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+#	RAM/ROM/Flash chip drivers
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_AMDSTD=m
+#	Mapping drivers for chip access
+CONFIG_MTD_PHYSMAP=m
+
+#	Block devices
+CONFIG_BLK_DEV_LOOP=m
+
+#	SCSI device support
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+
+#	Serial ATA (prod) and Parallel ATA (experimental) drivers
+CONFIG_ATA=y
+CONFIG_SATA_VIA=y
+
+#	Network device support
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NETDEV_1000=y
+#	Wireless LAN
+CONFIG_WLAN_80211=y
+CONFIG_RT2X00=m
+CONFIG_RT73USB=n
+
+#	Input device support
+CONFIG_INPUT_EVDEV=m
+#	Keyboards
+CONFIG_KEYBOARD_GPIO=m
+
+#	Hardware Monitoring support
+#CONFIG_SENSORS_LM75=m
+#	Generic Thermal sysfs driver
+#CONFIG_THERMAL=m
+#CONFIG_THERMAL_HWMON=y
+
+#	Multimedia support
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+CONFIG_USB_VIDEO_CLASS=m
+
+#	Graphics support
+#	Console display driver support
+CONFIG_VGA_CONSOLE=n
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+#	Bootup logo
+CONFIG_LOGO=n
+
+#	Sound card support
+CONFIG_SOUND=m
+#	Advanced Linux Sound Architecture
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+
+#	USB support
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+#	Inventra Highspeed Dual Role Controller
+CONFIG_USB_MUSB_HDRC=m
+
+#	LED Support
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+#	LED Triggers
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#	Real Time Clock
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+### File systems
+CONFIG_EXT2_FS=m
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=m
+#	CD-ROM/DVD Filesystems
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+#	DOS/FAT/NT Filesystems
+CONFIG_VFAT_FS=m
+#	Pseudo filesystems
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+#	Miscellaneous filesystems
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=m
+CONFIG_UBIFS_FS=m
+#	Network File Systems
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+#	Partition Types
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MSDOS_PARTITION=y
+#	Native language support
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+
+### Kernel hacking
+CONFIG_FRAME_WARN=8096
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=n
+CONFIG_DEBUG_USER=n
+

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ