| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <97475d95f5c1edad6c68f51b63c349760c2ff0f7.1291931041.git.bengardiner@nanometrics.ca>
Date: Thu, 9 Dec 2010 16:51:04 -0500
From: Ben Gardiner <bengardiner@...ometrics.ca>
To: Kevin Hilman <khilman@...prootsystems.com>,
davinci-linux-open-source@...ux.davincidsp.com,
linux-input@...r.kernel.org,
Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: linux-kernel@...r.kernel.org,
Chris Cordahi <christophercordahi@...ometrics.ca>,
Paul Mundt <lethal@...ux-sh.org>, Sekhar Nori <nsekhar@...com>,
Gabor Juhos <juhosg@...nwrt.org>,
"Govindarajan, Sriramakrishnan" <srk@...com>,
Kevin Hilman <khilman@...prootsystems.com>
Subject: [PATCH v6 2/5] da850-evm: add UI Expander pushbuttons
This patch adds EV_KEYs for each of the 8 pushbuttons on the UI board via a
gpio-key device.
The expander is a tca6416; it controls the SEL_{A,B,C} lines which enable and
disable the peripherals found on the UI board in addition to the 8 pushbuttons
mentioned above. The reason the existing tca6416-keypad driver is not employed
is because there was no aparent way to keep the gpio lines used as
SEL_{A,B,C} registered while simultaneously registering the pushbuttons as a
tca6416-keypad instance.
Some experimentation with the polling interval was performed; we were searching
for the largest polling interval that did not affect the feel of the
responsiveness of the buttons. It is very subjective but 200ms seems to be a
good value that accepts firm pushes but rejects very light ones. The key values
assigned to the buttons were arbitrarily chosen to be F1-F8.
Signed-off-by: Ben Gardiner <bengardiner@...ometrics.ca>
Reviewed-by: Chris Cordahi <christophercordahi@...ometrics.ca>
CC: Govindarajan, Sriramakrishnan <srk@...com>
Reviewed-by: Sekhar Nori <nsekhar@...com>
Signed-off-by: Sekhar Nori <nsekhar@...com>
CC: Kevin Hilman <khilman@...prootsystems.com>
CC: Gabor Juhos <juhosg@...nwrt.org>
---
Changes since v5:
* use header and platform_data type from final polled gpio keys driver
Changes since v4:
* integrated the use of Gabor Juhos' polled gpio buttons driver
* removed spurious whitespace change (Sekhar Nori)
* don't linebreak error messages (Sekhar Nori)
* kept the explicit static initialization of structure members in-place
Changes since v3:
* extracted Kconfig changes to patch 5/5
* fixed leading whitespace problem
Changes since v2:
* rebased to 083eae3e28643e0eefc5243719f8b1572cf98299 of
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git
* remove the "TODO : populate at runtime using" in this patch instead of 4/4
(Nori, Sekhar)
* integrated the static array initialization patch of Sekhar Nori
* use static array initialization ranges
* rename DA850_PB_POLL_MS to DA850_GPIO_KEYS_POLL_MS
* use shorter names prefixed with da850_evm
Changes since v1:
* set INPUT_POLLDEV default for DA850_EVM machine, but don't select it
unconditionally
* adding note to description about why tca6416-keypad was not used
* adding Govindarajan, Sriramakrishnan, the author of the tca6416-keypad
driver
---
arch/arm/mach-davinci/board-da850-evm.c | 95 +++++++++++++++++++++++++++++++
1 files changed, 95 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index f89b0b7..4377679 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,8 +17,10 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
+#include <linux/input.h>
#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -272,6 +274,87 @@ static inline void da850_evm_setup_emac_rmii(int rmii_sel)
static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
#endif
+
+#define DA850_KEYS_DEBOUNCE_MS 10
+/*
+ * At 200ms polling interval it is possible to miss an
+ * event by tapping very lightly on the push button but most
+ * pushes do result in an event; longer intervals require the
+ * user to hold the button whereas shorter intervals require
+ * more CPU time for polling.
+ */
+#define DA850_GPIO_KEYS_POLL_MS 200
+
+enum da850_evm_ui_exp_pins {
+ DA850_EVM_UI_EXP_SEL_C = 5,
+ DA850_EVM_UI_EXP_SEL_B,
+ DA850_EVM_UI_EXP_SEL_A,
+ DA850_EVM_UI_EXP_PB8,
+ DA850_EVM_UI_EXP_PB7,
+ DA850_EVM_UI_EXP_PB6,
+ DA850_EVM_UI_EXP_PB5,
+ DA850_EVM_UI_EXP_PB4,
+ DA850_EVM_UI_EXP_PB3,
+ DA850_EVM_UI_EXP_PB2,
+ DA850_EVM_UI_EXP_PB1,
+};
+
+static const char const *da850_evm_ui_exp[] = {
+ [DA850_EVM_UI_EXP_SEL_C] = "sel_c",
+ [DA850_EVM_UI_EXP_SEL_B] = "sel_b",
+ [DA850_EVM_UI_EXP_SEL_A] = "sel_a",
+ [DA850_EVM_UI_EXP_PB8] = "pb8",
+ [DA850_EVM_UI_EXP_PB7] = "pb7",
+ [DA850_EVM_UI_EXP_PB6] = "pb6",
+ [DA850_EVM_UI_EXP_PB5] = "pb5",
+ [DA850_EVM_UI_EXP_PB4] = "pb4",
+ [DA850_EVM_UI_EXP_PB3] = "pb3",
+ [DA850_EVM_UI_EXP_PB2] = "pb2",
+ [DA850_EVM_UI_EXP_PB1] = "pb1",
+};
+
+#define DA850_N_UI_PB 8
+
+static struct gpio_keys_button da850_evm_ui_keys[] = {
+ [0 ... DA850_N_UI_PB - 1] = {
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = -1, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ .desc = NULL, /* assigned at runtime */
+ },
+};
+
+static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
+ .buttons = da850_evm_ui_keys,
+ .nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
+ .poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_ui_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = 0,
+ .dev = {
+ .platform_data = &da850_evm_ui_keys_pdata
+ },
+};
+
+static void da850_evm_ui_keys_init(unsigned gpio)
+{
+ int i;
+ struct gpio_keys_button *button;
+
+ for (i = 0; i < DA850_N_UI_PB; i++) {
+ button = &da850_evm_ui_keys[i];
+ button->code = KEY_F8 - i;
+ button->desc = (char *)
+ da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
+ button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
+ }
+}
+
static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *c)
{
@@ -304,6 +387,13 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
gpio_direction_output(sel_b, 1);
gpio_direction_output(sel_c, 1);
+ da850_evm_ui_keys_init(gpio);
+ ret = platform_device_register(&da850_evm_ui_keys_device);
+ if (ret) {
+ pr_warning("Could not register UI GPIO expander push-buttons");
+ goto exp_setup_keys_fail;
+ }
+
ui_card_detected = 1;
pr_info("DA850/OMAP-L138 EVM UI card detected\n");
@@ -313,6 +403,8 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
return 0;
+exp_setup_keys_fail:
+ gpio_free(sel_c);
exp_setup_selc_fail:
gpio_free(sel_b);
exp_setup_selb_fail:
@@ -324,6 +416,8 @@ exp_setup_sela_fail:
static int da850_evm_ui_expander_teardown(struct i2c_client *client,
unsigned gpio, unsigned ngpio, void *c)
{
+ platform_device_unregister(&da850_evm_ui_keys_device);
+
/* deselect all functionalities */
gpio_set_value_cansleep(gpio + 5, 1);
gpio_set_value_cansleep(gpio + 6, 1);
@@ -340,6 +434,7 @@ static struct pca953x_platform_data da850_evm_ui_expander_info = {
.gpio_base = DAVINCI_N_GPIO,
.setup = da850_evm_ui_expander_setup,
.teardown = da850_evm_ui_expander_teardown,
+ .names = da850_evm_ui_exp,
};
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists