linux-kernel - [PATCH 1/2] cs5535-gpio: don't apply errata #36 to edge detect GPIOs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20101215112807.2c85e991@queued.net>
Date:	Wed, 15 Dec 2010 11:28:07 -0800
From:	Andres Salomon <dilinger@...ued.net>
To:	akpm@...ux-foundation.org
Cc:	linux-kernel@...r.kernel.org, linux-geode@...ts.infradead.org,
	dsd@...top.org, pgf@...top.org
Subject: [PATCH 1/2] cs5535-gpio: don't apply errata #36 to edge detect
 GPIOs


The edge detect status GPIOs function differently from the other atomic model
CS5536 GPIO registers; writing 1 to the high bits clears the GPIO, but writing
1 to the lower bits also clears the bit.  This means that read-modify-write
doesn't actually work for it, so don't apply the errata here.  If a negative
edge status gets lost after resume.. well, we tried our best!

Signed-off-by: Andres Salomon <dilinger@...ued.net>
Tested-by: Daniel Drake <dsd@...top.org>
---
 drivers/gpio/cs5535-gpio.c |   15 +++++++++++----
 1 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index 599f6c9..79eb9c5 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,15 +56,22 @@ static struct cs5535_gpio_chip {
  * registers, see include/linux/cs5535.h.
  */
 
-static void errata_outl(u32 val, unsigned long addr)
+static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
+		unsigned int reg)
 {
+	unsigned long addr = chip->base + 0x80 + reg;
+
 	/*
 	 * According to the CS5536 errata (#36), after suspend
 	 * a write to the high bank GPIO register will clear all
 	 * non-selected bits; the recommended workaround is a
 	 * read-modify-write operation.
+	 *
+	 * Don't apply this errata to the edge status GPIOs, as writing
+	 * to their lower bits will clear them.
 	 */
-	val |= inl(addr);
+	if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS)
+		val |= inl(addr);
 	outl(val, addr);
 }
 
@@ -76,7 +83,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << offset, chip->base + reg);
 	else
 		/* high bank register */
-		errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
+		errata_outl(chip, 1 << (offset - 16), reg);
 }
 
 void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -98,7 +105,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << (offset + 16), chip->base + reg);
 	else
 		/* high bank register */
-		errata_outl(1 << offset, chip->base + 0x80 + reg);
+		errata_outl(chip, 1 << offset, reg);
 }
 
 void cs5535_gpio_clear(unsigned offset, unsigned int reg)
-- 
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/