| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1292992394-3264-1-git-send-email-tomoya-linux@dsn.okisemi.com>
Date: Wed, 22 Dec 2010 13:33:14 +0900
From: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To: linux-kernel@...r.kernel.org, alan@...rguk.ukuu.org.uk,
gregkh@...e.de
Cc: qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
kok.howg.ewe@...el.com,
Tomoya MORINAGA <tomoya-linux@....okisemi.com>
Subject: [PATCH] pch_phub: add new device ML7213
Add ML7213 device information.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
drivers/misc/Kconfig | 7 ++++-
drivers/misc/pch_phub.c | 73 ++++++++++++++++++++++++++++++++++-------------
2 files changed, 59 insertions(+), 21 deletions(-)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..4852595 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -441,7 +441,7 @@ config BMP085
module will be called bmp085.
config PCH_PHUB
- tristate "PCH Packet Hub of Intel Topcliff"
+ tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -449,6 +449,11 @@ config PCH_PHUB
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.
+ This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+ for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
+
To compile this driver as a module, choose M here: the module will
be called pch_phub.
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 744b804..a365e03 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,7 +33,12 @@
#define PHUB_TIMEOUT 0x05 /* Time out value for Status Register */
#define PCH_PHUB_ROM_WRITE_ENABLE 0x01 /* Enabling for writing ROM */
#define PCH_PHUB_ROM_WRITE_DISABLE 0x00 /* Disabling for writing ROM */
-#define PCH_PHUB_ROM_START_ADDR 0x14 /* ROM data area start address offset */
+#define PCH_PHUB_MAC_START_ADDR 0x20C /* MAC data area start address offset */
+#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset
+ (Intel EG20T PCH)*/
+#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
+ offset(OKI SEMICONDUCTOR ML7213)
+ */
/* MAX number of INT_REDUCE_CONTROL registers */
#define MAX_NUM_INT_REDUCE_CONTROL_REG 128
@@ -42,6 +47,10 @@
#define CLKCFG_CAN_50MHZ 0x12000000
#define CLKCFG_CANCLK_MASK 0xFF000000
+/* Macros for ML7213 */
+#define PCI_VENDOR_ID_ROHM 0x10db
+#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
+
/* SROM ACCESS Macro */
#define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
@@ -62,6 +71,11 @@
#define PCH_PHUB_OROM_SIZE 15360
+enum pch_phub_type {
+ PCH_EG20T, /* Intel EG20T PCH */
+ PCH_ML7213, /* OKI SEMICONDUCTOR ML7213 for IVI */
+};
+
/**
* struct pch_phub_reg - PHUB register structure
* @phub_id_reg: PHUB_ID register val
@@ -96,6 +110,7 @@ struct pch_phub_reg {
u32 clkcfg_reg;
void __iomem *pch_phub_base_address;
void __iomem *pch_phub_extrom_base_address;
+ int type;
};
/* SROM SPEC for MAC address assignment offset */
@@ -298,7 +313,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip,
{
unsigned int mem_addr;
- mem_addr = PCH_PHUB_ROM_START_ADDR +
+ mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
pch_phub_mac_offset[offset_address];
pch_phub_read_serial_rom(chip, mem_addr, data);
@@ -315,7 +330,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip,
int retval;
unsigned int mem_addr;
- mem_addr = PCH_PHUB_ROM_START_ADDR +
+ mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
pch_phub_mac_offset[offset_address];
retval = pch_phub_write_serial_rom(chip, mem_addr, data);
@@ -594,23 +609,40 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
"pch_phub_extrom_base_address variable is %p\n", __func__,
chip->pch_phub_extrom_base_address);
- pci_set_drvdata(pdev, chip);
-
- retval = sysfs_create_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
- if (retval)
- goto err_sysfs_create;
-
- retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
- if (retval)
- goto exit_bin_attr;
-
- pch_phub_read_modify_write_reg(chip, (unsigned int)CLKCFG_REG_OFFSET,
- CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK);
+ if (id->device == PCI_DEVICE_ID_PCH1_PHUB) {
+ chip->type = PCH_EG20T;
+ retval = sysfs_create_file(&pdev->dev.kobj,
+ &dev_attr_pch_mac.attr);
+ if (retval)
+ goto err_sysfs_create;
- /* set the prefech value */
- iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
- /* set the interrupt delay value */
- iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto exit_bin_attr;
+
+ pch_phub_read_modify_write_reg(chip,
+ (unsigned int)CLKCFG_REG_OFFSET,
+ CLKCFG_CAN_50MHZ,
+ CLKCFG_CANCLK_MASK);
+
+ /* set the prefech value */
+ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+ /* set the interrupt delay value */
+ iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ } else if (id->device == PCI_DEVICE_ID_ROHM_ML7213_PHUB) {
+ chip->type = PCH_ML7213;
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto err_sysfs_create;
+ /* set the prefech value
+ * Device2(USB OHCI #1/ USB EHCI #1/ USB Device):a
+ * Device4(SDIO #0,1,2):f
+ * Device6(SATA 2):f
+ * Device8(USB OHCI #0/ USB EHCI #0):a
+ */
+ iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14);
+ }
+ pci_set_drvdata(pdev, chip);
return 0;
exit_bin_attr:
@@ -688,6 +720,7 @@ static int pch_phub_resume(struct pci_dev *pdev)
static struct pci_device_id pch_phub_pcidev_id[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB)},
{0,}
};
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists