| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2DEEA3AB13739D45A22ADDB5086AEA0BC91CBB@sshaexmb1.amd.com>
Date: Mon, 27 Dec 2010 10:36:31 +0800
From: "Xu, Andiry" <Andiry.Xu@....com>
To: "Rafael J. Wysocki" <rjw@...k.pl>
CC: Sarah Sharp <sarah.a.sharp@...ux.intel.com>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...e.de>,
Alan Stern <stern@...land.harvard.edu>,
Linux-pm mailing list <linux-pm@...ts.linux-foundation.org>,
Matthew Garrett <mjg@...hat.com>
Subject: RE: Scary warnings from xhci_hcd on rmmod and during shutdown/suspend/resume
> -----Original Message-----
> From: Rafael J. Wysocki [mailto:rjw@...k.pl]
> Sent: Monday, December 27, 2010 6:07 AM
> To: Xu, Andiry
> Cc: Sarah Sharp; linux-kernel@...r.kernel.org;
linux-usb@...r.kernel.org;
> Greg Kroah-Hartman; Alan Stern; Linux-pm mailing list; Matthew Garrett
> Subject: Re: Scary warnings from xhci_hcd on rmmod and during
> shutdown/suspend/resume
>
> On Friday, December 17, 2010, Rafael J. Wysocki wrote:
> > On Friday, December 17, 2010, Xu, Andiry wrote:
> > > >
> > > > and during shutdown (I believe the warnings are the same or
> analogous
> > > to
> > > > the
> > > > above).
> > > >
> > > > I tested with the attached patch from Andiry applied and I got
the
> > > > following
> > > > BUG during resume:
> > >
> > > Does this bug occurs without the synchronize irq patch?
> >
> > Yes, it does.
> >
> > > Seems the rmmod, shutdown and resume bugs are caused by
> xhci_cleanup_msix().
> > >
> > > >
> > > > [ 91.703778] sd 0:0:0:0: [sda] Starting disk
> > > > [ 91.704054] sd 2:0:0:0: [sdb] Starting disk
> > > > [ 91.703680] xhci_hcd 0000:04:00.0: Host controller not
halted,
> > > aborting
> > > > reset.
> > > > [ 91.703680] BUG: sleeping function called from invalid
context at
> > > > /home/rafael/src/linux-2.6/kernel/mutex.c:278
> > > > [ 91.703680] in_atomic(): 1, irqs_disabled(): 1, pid: 1234,
name:
> > > > kworker/u:6
> > > > [ 91.703680] INFO: lockdep is turned off.
> > > > [ 91.703680] irq event stamp: 24060
> > > > [ 91.703680] hardirqs last enabled at (24059):
> [<ffffffff810aa071>]
> > > > rcu_note_context_switch+0xa1/0x1c0
> > > > [ 91.703680] hardirqs last disabled at (24060):
> [<ffffffff81494e92>]
> > > > _raw_spin_lock_irq+0x12/0x50
> > > > [ 91.703680] softirqs last enabled at (20026):
> [<ffffffff8105056e>]
> > > > __do_softirq+0x11e/0x160
> > > > [ 91.703680] softirqs last disabled at (20011):
> [<ffffffff8100368c>]
> > > > call_softirq+0x1c/0x30
> > > > [ 91.703680] Pid: 1234, comm: kworker/u:6 Tainted: G W
> > > 2.6.37-
> > > > rc6+ #12
> > > > [ 91.703680] Call Trace:
> > > > [ 91.703680] [<ffffffff81079290>] ?
> print_irqtrace_events+0xd0/0xe0
> > > > [ 91.703680] [<ffffffff81036783>] __might_sleep+0x103/0x130
> > > > [ 91.703680] [<ffffffff81492f73>]
mutex_lock_nested+0x33/0x380
> > > > [ 91.703680] [<ffffffff81495727>] ?
> > > > _raw_spin_unlock_irqrestore+0x67/0x70
> > > > [ 91.703680] [<ffffffff810a39de>] ?
> dynamic_irq_cleanup+0xde/0x100
> > > > [ 91.703680] [<ffffffff810a3a58>] irq_free_descs+0x58/0x90
> > > > [ 91.703680] [<ffffffff81022008>] destroy_irq+0x78/0x90
> > > > [ 91.703680] [<ffffffff810222c9>]
> native_teardown_msi_irq+0x9/0x10
> > > > [ 91.703680] [<ffffffff811ee0b0>]
> > > default_teardown_msi_irqs+0x70/0xa0
> > > > [ 91.703680] [<ffffffff811edb41>] free_msi_irqs+0xa1/0x110
> > > > [ 91.703680] [<ffffffff811eec1d>] pci_disable_msix+0x3d/0x50
> > > > [ 91.703680] [<ffffffffa03f0609>] xhci_cleanup_msix+0x39/0x80
> > > [xhci_hcd]
> > > > [ 91.703680] [<ffffffffa03f111c>] xhci_resume+0x1ac/0x250
> > > [xhci_hcd]
> > > > [ 91.703680] [<ffffffffa03f65c4>] xhci_pci_resume+0x14/0x20
> > > [xhci_hcd]
> > > > [ 91.703680] [<ffffffff8138996b>] resume_common+0xbb/0x140
> > > > [ 91.703680] [<ffffffff81389a5e>] hcd_pci_restore+0xe/0x10
> > > > [ 91.703680] [<ffffffff811e36f3>] pci_pm_restore+0x63/0xb0
> > > > [ 91.703680] [<ffffffff813334bd>] pm_op+0x19d/0x1c0
> > > > [ 91.703680] [<ffffffff81333be4>] device_resume+0x94/0x220
> > > > [ 91.703680] [<ffffffff81333d8c>] async_resume+0x1c/0x50
> > > > [ 91.703680] [<ffffffff8106e6e6>]
async_run_entry_fn+0x86/0x160
> > > > [ 91.703680] [<ffffffff81060672>]
process_one_work+0x1a2/0x450
> > > > [ 91.703680] [<ffffffff81060614>] ?
process_one_work+0x144/0x450
> > > > [ 91.703680] [<ffffffff811d2704>] ?
do_raw_spin_lock+0x104/0x170
> > > > [ 91.703680] [<ffffffff8106e660>] ?
async_run_entry_fn+0x0/0x160
> > > > [ 91.703680] [<ffffffff81061e32>] worker_thread+0x162/0x340
> > > > [ 91.703680] [<ffffffff81061cd0>] ? worker_thread+0x0/0x340
> > > > [ 91.703680] [<ffffffff81066836>] kthread+0x96/0xa0
> > > > [ 91.703680] [<ffffffff81003594>]
kernel_thread_helper+0x4/0x10
> > > > [ 91.703680] [<ffffffff81036fdb>] ?
finish_task_switch+0x7b/0xe0
> > > > [ 91.703680] [<ffffffff81495d00>] ? restore_args+0x0/0x30
> > > > [ 91.703680] [<ffffffff810667a0>] ? kthread+0x0/0xa0
> > > > [ 91.703680] [<ffffffff81003590>] ?
kernel_thread_helper+0x0/0x10
> > > > [ 91.706248] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
> > > > [ 91.706251] xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
> > > > [ 91.706253] xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
> > > > [ 91.706256] xhci_hcd 0000:04:00.0: irq 84 for MSI/MSI-X
> > > > [ 91.706258] xhci_hcd 0000:04:00.0: irq 85 for MSI/MSI-X
> > > > [ 91.706260] xhci_hcd 0000:04:00.0: irq 86 for MSI/MSI-X
> > > > [ 91.706262] xhci_hcd 0000:04:00.0: irq 87 for MSI/MSI-X
> > > >
> > > > The issues appear to be 100% reproducible.
> > > >
> > >
> > > I'm not able to reproduce the issue. Can you specify your kernel
> version
> > > and attach your .config?
> >
> > The kernel is basically 2.6.37-rc6, but I was able to reproduce this
> with
> > previous 2.6.37-rc too.
> >
> > Attached are the full dmesg containing the traces I sent before
> and .config.
>
> OK, so the problem seems to be that xhci_cleanup_msix() cannot be
called
> under
> a spinlock, because it causes a mutex to be acquired somewhere up the
call
> chain.
>
> Also, you don't really need to do this "drop MSI-X and acquire a
'normal'
> IRQ
> to fool the USB core" thing during suspend.
>
> The appended patch works on my test machine, where I mean that (a) the
> reported
> warnings don't appear and (b) it doesn't crash the system during
resume
> (from
> hibernation).
>
Thanks for the patch. Actually I already have a patch in modification
about synchronize_irq() in xhci_suspend() and I'll submit it later. The
patch will fix your suspend/hibernation issue.
Sarah will submit another patch, move the xhci_cleanup_msix() out of
spinlock to fix the rmmod issue. They are actually two bugs so we use
two patches.
Thanks,
Andiry
> ---
> drivers/usb/core/hcd-pci.c | 3 ++-
> drivers/usb/host/xhci.c | 38
++++++++------------------------------
> include/linux/usb/hcd.h | 1 +
> 3 files changed, 11 insertions(+), 31 deletions(-)
>
> Index: linux-2.6/include/linux/usb/hcd.h
> ===================================================================
> --- linux-2.6.orig/include/linux/usb/hcd.h
> +++ linux-2.6/include/linux/usb/hcd.h
> @@ -119,6 +119,7 @@ struct usb_hcd {
> unsigned wireless:1; /* Wireless USB HCD */
> unsigned authorized_default:1;
> unsigned has_tt:1; /* Integrated TT in root
hub */
> + unsigned multiple_irqs:1; /* Multiple IRQs
used */
>
> int irq; /* irq allocated */
> void __iomem *regs; /* device memory/io */
> Index: linux-2.6/drivers/usb/core/hcd-pci.c
> ===================================================================
> --- linux-2.6.orig/drivers/usb/core/hcd-pci.c
> +++ linux-2.6/drivers/usb/core/hcd-pci.c
> @@ -406,7 +406,8 @@ static int suspend_common(struct device
> return retval;
> }
>
> - synchronize_irq(pci_dev->irq);
> + if (!hcd->multiple_irqs)
> + synchronize_irq(pci_dev->irq);
>
> /* Downstream ports from this root hub should already be
quiesced,
> so
> * there will be no DMA activity. Now we can shut down the
upstream
> Index: linux-2.6/drivers/usb/host/xhci.c
> ===================================================================
> --- linux-2.6.orig/drivers/usb/host/xhci.c
> +++ linux-2.6/drivers/usb/host/xhci.c
> @@ -263,6 +263,8 @@ static int xhci_setup_msix(struct xhci_h
> 0, "xhci_hcd", xhci_to_hcd(xhci));
> if (ret)
> goto disable_msix;
> + else
> + xhci_to_hcd(xhci)->multiple_irqs = true;
> }
>
> return ret;
> @@ -508,9 +510,10 @@ void xhci_stop(struct usb_hcd *hcd)
> spin_lock_irq(&xhci->lock);
> xhci_halt(xhci);
> xhci_reset(xhci);
> - xhci_cleanup_msix(xhci);
> spin_unlock_irq(&xhci->lock);
>
> + xhci_cleanup_msix(xhci);
> +
> #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
> /* Tell the event ring poll function not to reschedule */
> xhci->zombie = 1;
> @@ -544,9 +547,10 @@ void xhci_shutdown(struct usb_hcd *hcd)
>
> spin_lock_irq(&xhci->lock);
> xhci_halt(xhci);
> - xhci_cleanup_msix(xhci);
> spin_unlock_irq(&xhci->lock);
>
> + xhci_cleanup_msix(xhci);
> +
> xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
> xhci_readl(xhci, &xhci->op_regs->status));
> }
> @@ -677,8 +681,6 @@ int xhci_suspend(struct xhci_hcd *xhci)
> spin_unlock_irq(&xhci->lock);
> return -ETIMEDOUT;
> }
> - /* step 5: remove core well power */
> - xhci_cleanup_msix(xhci);
> spin_unlock_irq(&xhci->lock);
>
> return rc;
> @@ -694,7 +696,6 @@ int xhci_resume(struct xhci_hcd *xhci, b
> {
> u32 command, temp = 0;
> struct usb_hcd *hcd = xhci_to_hcd(xhci);
> - struct pci_dev *pdev =
to_pci_dev(hcd->self.controller);
> int old_state, retval;
>
> old_state = hcd->state;
> @@ -729,9 +730,10 @@ int xhci_resume(struct xhci_hcd *xhci, b
> xhci_dbg(xhci, "Stop HCD\n");
> xhci_halt(xhci);
> xhci_reset(xhci);
> + spin_unlock_irq(&xhci->lock);
> +
> if (hibernated)
> xhci_cleanup_msix(xhci);
> - spin_unlock_irq(&xhci->lock);
>
> #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
> /* Tell the event ring poll function not to reschedule
*/
> @@ -765,30 +767,6 @@ int xhci_resume(struct xhci_hcd *xhci, b
> return retval;
> }
>
> - spin_unlock_irq(&xhci->lock);
> - /* Re-setup MSI-X */
> - if (hcd->irq)
> - free_irq(hcd->irq, hcd);
> - hcd->irq = -1;
> -
> - retval = xhci_setup_msix(xhci);
> - if (retval)
> - /* fall back to msi*/
> - retval = xhci_setup_msi(xhci);
> -
> - if (retval) {
> - /* fall back to legacy interrupt*/
> - retval = request_irq(pdev->irq, &usb_hcd_irq,
IRQF_SHARED,
> - hcd->irq_descr, hcd);
> - if (retval) {
> - xhci_err(xhci, "request interrupt %d failed\n",
> - pdev->irq);
> - return retval;
> - }
> - hcd->irq = pdev->irq;
> - }
> -
> - spin_lock_irq(&xhci->lock);
> /* step 4: set Run/Stop bit */
> command = xhci_readl(xhci, &xhci->op_regs->command);
> command |= CMD_RUN;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists